@@ -180,12 +180,21 @@ cpu {
};
};
+ spdif_out: spdif-out {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
+ spdif_in: spdif-in {
+ compatible = "linux,spdif-dir";
+ #sound-dai-cells = <0>;
+ };
+
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "imx-spdif";
- spdif-controller = <&spdif1>;
- spdif-out;
- spdif-in;
+ audio-cpu = <&spdif1>;
+ audio-codec = <&spdif_out>, <&spdif_in>;
};
};
@@ -124,12 +124,21 @@ sound-wm8524 {
"Line Out Jack", "LINEVOUTR";
};
+ spdif_out: spdif-out {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
+ spdif_in: spdif-in {
+ compatible = "linux,spdif-dir";
+ #sound-dai-cells = <0>;
+ };
+
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "imx-spdif";
- spdif-controller = <&spdif1>;
- spdif-out;
- spdif-in;
+ audio-cpu = <&spdif1>;
+ audio-codec = <&spdif_out>, <&spdif_in>;
};
sound-micfil {
@@ -125,19 +125,33 @@ link_codec: simple-audio-card,codec {
};
};
+ spdif_out: spdif-out {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
+ spdif_in: spdif-in {
+ compatible = "linux,spdif-dir";
+ #sound-dai-cells = <0>;
+ };
+
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "imx-spdif";
- spdif-controller = <&spdif1>;
- spdif-out;
- spdif-in;
+ audio-cpu = <&spdif1>;
+ audio-codec = <&spdif_out>, <&spdif_in>;
+ };
+
+ hdmi_arc_in: hdmi-arc-in {
+ compatible = "linux,spdif-dir";
+ #sound-dai-cells = <0>;
};
sound-hdmi-arc {
compatible = "fsl,imx-audio-spdif";
model = "imx-hdmi-arc";
- spdif-controller = <&spdif2>;
- spdif-in;
+ audio-cpu = <&spdif2>;
+ audio-codec = <&hdmi_arc_in>;
};
};
The merge of imx-spdif driver into fsl-asoc-card brought new DT properties that can be used with the "fsl,imx-audio-spdif" compatible: * The "spdif-controller" property from imx-spdif is named "audio-cpu" in fsl-asoc-card. * fsl-asoc-card uses codecs explicitly declared in DT with "audio-codec". With an S/PDIF, codec drivers spdif_transmitter and spdif_receiver should be used. Driver imx-spdif used instead the dummy codec and a pair of boolean properties, "spdif-in" and "spdif-out". While backward compatibility is kept to support properties "spdif-controller", "spdif-in" and "spdif-out", using new properties has several benefits: * "audio-cpu" and "audio-codec" are more generic names reflecting that the fsl-asoc-card driver supports multiple hardware. They are properties already used by devices using the fsl-asoc-card driver. They are also similar to properties of simple-card: "cpu" and "codec". * "spdif-in" and "spdif-out" imply the use of the dummy codec in the driver. However, there are already two codec drivers for the S/PDIF, spdif_transmitter and spdif_receiver. It is better to declare S/PDIF Tx and Rx devices in a DT, and then reference them with "audio-codec" than using the dummy codec. For those reasons, this commit updates in-tree DTs to use the new properties: * Rename "spdif-controller" property to "audio-cpu". * Declare S/PDIF transmitter and/or receiver devices, and use them with the "audio-codec" property instead of "spdif-out" and/or "spdif-in". These modifications were tested only on an imx8mn-evk board. Note that out-of-tree and old DTs are still supported. Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com> --- arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 15 +++++++++--- arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 15 +++++++++--- arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 24 +++++++++++++++---- 3 files changed, 43 insertions(+), 11 deletions(-)