From patchwork Fri Aug 23 09:05:20 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Peng Fan (OSS)" X-Patchwork-Id: 13774790 Received: from EUR03-VI1-obe.outbound.protection.outlook.com (mail-vi1eur03on2080.outbound.protection.outlook.com [40.107.103.80]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id B34691494D0 for ; Fri, 23 Aug 2024 08:57:09 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=fail smtp.client-ip=40.107.103.80 ARC-Seal: i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1724403433; cv=fail; b=PO1wE0NR1fm9kyhFubZu7ntcGKPCDbVPxrr9pDHt9q8ylLIID4k8lyC257QwA1sjXg3du+X1NaRsI9yiEOQYU+xDpuwGnMlCIJmzCkprWZ/7zTnlQmw4huy7cK2l6l0oweJ77Q/uWsrZdBeVy7vP+UtFBScL4l5/vlL8GJ2ibt4= ARC-Message-Signature: i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1724403433; c=relaxed/simple; bh=Mxtx727GKtDC5qb+9YKPTWtjdLgYtIaycaq2wKxGAeM=; h=From:Date:Subject:Content-Type:Message-Id:References:In-Reply-To: To:Cc:MIME-Version; b=l8HdS8MYkFWFBRxQ0UtrRSL4bzirKrItzGgwQDBp7t5BC3b2AvSvBRqpv3Xv1qWeGs1Pasj6WtX9x4vkNJUFgZ2ZUUe83fc5+d80UcCECrF7RS8vkNDx/2nvfGh3TyOg0oO5KXsn1N/W5ISuBxPWPKbPSqRaZRI9DRsG66jxATQ= ARC-Authentication-Results: i=2; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=oss.nxp.com; spf=pass smtp.mailfrom=oss.nxp.com; dkim=pass (2048-bit key) header.d=NXP1.onmicrosoft.com header.i=@NXP1.onmicrosoft.com header.b=qnZ0SecC; arc=fail smtp.client-ip=40.107.103.80 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=oss.nxp.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=oss.nxp.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=NXP1.onmicrosoft.com header.i=@NXP1.onmicrosoft.com header.b="qnZ0SecC" ARC-Seal: i=1; a=rsa-sha256; s=arcselector10001; d=microsoft.com; cv=none; b=PYrFD05xuGYCcvgmLYQBU8vLNt6wfD1ywRugyTv7lMjUW636KAGohXQfWRluldMXPxy7nmQ7aSgiEO3bIqA80wsq2l0YRNB9r+n211ur47LoQ3QqK20Kaijh61bQHfddxjxMVylZEcl/GFLDofUOp/WOmTkmXwy5oj38iXcq3rjTGMXksX2mAQESxcw0oKYQiE3nOPuOfnUEu0RPfIis1kkvLIDxMimr34OSZNb9rdP1BmzslhbWckfqVrUvXpqMYX6W2IQYNrhTIyT6gz0qGMDOCvZR2kQKk65S5bUfh8WznGc7hF3IMwwHAayJBS9UxkgjJaDwmbQKMGOptfyinQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector10001; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=AF/4FrWG/WUGQlZcVFSjAzcI1cZT51tO78QpKTkfC6M=; b=KsnUCoyTbhG9TzQ6oC1aL8kN/7FZzWJYJoWxw5XSAmwkyQSQ+jmZhm1TRqYt6C++8jEA0UI/ce34NxKzl8a5Tj0CFP1f/+KxrhnuHNoE4PYNLnlCAT19UxQxVgmP0D37NSFtxqB8zKJJJ3ZVeYI/Gw8UwWkBNidHg11iUylj6zjqmggygVjxWqA4qOx5CgUb8k2XeZIV21NGPqJlxivHQ2olcSd/tqiNMUba1+0V1SxcDVeU+l+pc4ErgQLd+gZme59SVxsWrhjaa0TJcHx+iTGLLK4wUuzHwiw0bLIpaE6h0emPhfS+2CgaqKe5afQv3u7yeO9rlVwlUn/7WqMM8g== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=oss.nxp.com; dmarc=pass action=none header.from=oss.nxp.com; dkim=pass header.d=oss.nxp.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=NXP1.onmicrosoft.com; s=selector1-NXP1-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=AF/4FrWG/WUGQlZcVFSjAzcI1cZT51tO78QpKTkfC6M=; b=qnZ0SecCjcrW2lRbnnymtUD7Z79xWVkgWl8c+zuJY8dfrtJF/tUdL13AZOTu4rBPuZI9cTZC7xkLXF/PDiUMORJSPWUeWWfgx82FmpYEtgZusonVJr+Y4pa2XkJ3VMgHMlbXgFR0IjyCBbxfqc/6T04Q57OlWnv/vEJFJZ0pk5Y/Be6jTAR0aZdgB5waFrcwHVeDCb8056LdMHt6qd0REvPFxRix8ETgw1oucYzdPe8toJ7zePpV9XPShLhpLQwqjMxqu4//GfQoao9JEyALO5DZilvqEHXDpIq4EYriTYU71MVWmLKiuY5jojRlDIljIJg8CB+YaiGMkK9cAcQUzQ== Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=oss.nxp.com; Received: from PAXPR04MB8459.eurprd04.prod.outlook.com (2603:10a6:102:1da::15) by PA1PR04MB10892.eurprd04.prod.outlook.com (2603:10a6:102:488::13) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.7897.19; Fri, 23 Aug 2024 08:57:06 +0000 Received: from PAXPR04MB8459.eurprd04.prod.outlook.com ([fe80::165a:30a2:5835:9630]) by PAXPR04MB8459.eurprd04.prod.outlook.com ([fe80::165a:30a2:5835:9630%6]) with mapi id 15.20.7897.014; Fri, 23 Aug 2024 08:57:05 +0000 From: "Peng Fan (OSS)" Date: Fri, 23 Aug 2024 17:05:20 +0800 Subject: [PATCH v8 4/7] firmware: arm_scmi: add NXP i.MX95 SCMI documentation Message-Id: <20240823-imx95-bbm-misc-v2-v8-4-e600ed9e9271@nxp.com> References: <20240823-imx95-bbm-misc-v2-v8-0-e600ed9e9271@nxp.com> In-Reply-To: <20240823-imx95-bbm-misc-v2-v8-0-e600ed9e9271@nxp.com> To: Sudeep Holla , Cristian Marussi , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Shawn Guo , Sascha Hauer , Pengutronix Kernel Team , Fabio Estevam , Peng Fan , Alexandre Belloni , Dmitry Torokhov Cc: arm-scmi@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, imx@lists.linux.dev, linux-rtc@vger.kernel.org, linux-input@vger.kernel.org X-Mailer: b4 0.14.1 X-Developer-Signature: v=1; a=ed25519-sha256; t=1724403944; l=55322; i=peng.fan@nxp.com; s=20230812; h=from:subject:message-id; bh=VyVgCny3AZ1ua8GlLQg3N6wgSuj0JGI0PHtl0IL+rkc=; b=0tMyMeDsdO4IQ07HcEAOzlWIIVlCm/fK8IiUnOL5J9zV9enNP7i4/nCGKcP+JzEzDwyAwKVoK V0Vg5XzZIq0DCwvfIp/sAGqS8mXK24rPE6fckloPhPWYCuPAEs4eOy8 X-Developer-Key: i=peng.fan@nxp.com; a=ed25519; pk=I4sJg7atIT1g63H7bb5lDRGR2gJW14RKDD0wFL8TT1g= X-ClientProxiedBy: SG2PR01CA0173.apcprd01.prod.exchangelabs.com (2603:1096:4:28::29) To PAXPR04MB8459.eurprd04.prod.outlook.com (2603:10a6:102:1da::15) Precedence: bulk X-Mailing-List: imx@lists.linux.dev List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-MS-Exchange-MessageSentRepresentingType: 1 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: PAXPR04MB8459:EE_|PA1PR04MB10892:EE_ X-MS-Office365-Filtering-Correlation-Id: ad8d4069-e529-44a3-af25-08dcc351901a X-MS-Exchange-SharedMailbox-RoutingAgent-Processed: True X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0;ARA:13230040|366016|52116014|376014|1800799024|7416014|921020|38350700014; X-Microsoft-Antispam-Message-Info: =?utf-8?q?QByouZqQvJPL7m12HscgUM/XnFCu93f?= =?utf-8?q?pgJTOjbzlabGmMZhTysANgdJwiRlgovxkVuDL+itVSQaoF3YX48etaOVmL8LNsLzh?= =?utf-8?q?iBXn4hNPlAaaU9Eir7KGneDPtQ/4ck9vDg4zIFqc7J3bp1HBeuOj89rKgmtvuG9En?= =?utf-8?q?gSw2DTldv5Fz6TrW/NzhCFsOEQJgqZhFoZi74mBg8Zguz7/mwgaQ5/vJihSYxd2q7?= =?utf-8?q?cODxMFb+al3IzG++sFWKoMTqtHMaLH5cKiiQxSBNlKmSdT4U2bmysQ3jwWvYbkhSA?= =?utf-8?q?aqXacBCj/6f0JEYjvLBZMRa40905sy/W1S6PO0CRWzlQGVfR9OLcbslB6vIt749QF?= =?utf-8?q?lDbDUMQYMSGYofeu6yOgZMgO2kTlh2rEaTyaEfr+wPXvaq2nmxS22o7p9v6UR/SJU?= =?utf-8?q?XWgSJHXvHJlWBj4bJLt6h487Gbf6NJwBTQUUVNsBkuaOH+Jr6mQStQbgM4KYtrTKU?= =?utf-8?q?rpaMGXI5q/i2ne38J9aM56givwjP5EK3ZRsEyZ+x+Q/KVbF96QWYyY+3CUewFcC5f?= =?utf-8?q?BaLbECgroR8dXYb2nymwy31shU7QC1P6JAAqYPQ+cQmF9gFhc7/jB7UCMPrbTwHbD?= =?utf-8?q?9AWMOvLwyN492EPYwuSqLsIqJbupg1YJF95drTe2fPyhYWWIr1XZsCSPvRl667Qsr?= =?utf-8?q?eklCt4kXsarQmuismiKNv9MXl6TFMj8iyuY0ubAJq0AsyYfNstTDcA4eetJcVsBdT?= =?utf-8?q?BgHA7KYiwwkug4ty18n1+th1pDHmkLtShwKK4aK5equu27ASOnhDAvKsgDCxn8Az/?= =?utf-8?q?lu65oIi51mfMU9NF5qcG4IPEGjLTDbU17ZzWvtVtIiVKWmbLFd11JzexCi6bDVwKs?= =?utf-8?q?/oVwl85XK6ut6ezezt7w8glKwwWfscfd/OZW6n1Se81HSc5E5pxAq0GendqwhJv2t?= =?utf-8?q?W3Dd0r6bZHB/3HLsBg/eWgm2Pk80ztdi0EsFF9GyxOEOKARMCve8R3+V0ZgVs12gL?= =?utf-8?q?eSvBOCtl/KtsTEToEIEO5bkPhxeQO1M0Ft0vcIK0S8PAkBbGPBEo2+FFFdrwwnXPS?= =?utf-8?q?4eFQt/L8gXXm1Xm2IKTF8KWcocrfE4v5SsGCS1EdrgKPnca81H27ggIACm34txb48?= =?utf-8?q?J9ynwdOS6aCZlvz7fnjsZdOLqmeHl384hmNzPGGarx4ivJZg5HznMJ3QzZYOGFQ3q?= =?utf-8?q?SZ4Xzx3u3vu5BT3TMWNQhZjR0BHHmrxW1CJ2SJuJFQTYbEetguFyPm/zmPzyV2zpb?= =?utf-8?q?kDjrwYfY1n/ulGaeKySZPaTSpOG1qC48OTvWx3wkiQmSVSe7YVQJHYBrS7/1D9dP4?= =?utf-8?q?L+56EQSU+2v3IXz6g7yl1WoUPfU5ExAqNITNZFZccFWKYJJFQVlzdfRmsSePDBAoR?= =?utf-8?q?zoJVmVkXpAtiM5EmeRqk+u+/nuyvuVvkPOhzLqbJ2FKHFwYRq3V1XMg=3D?= X-Forefront-Antispam-Report: CIP:255.255.255.255;CTRY:;LANG:en;SCL:1;SRV:;IPV:NLI;SFV:NSPM;H:PAXPR04MB8459.eurprd04.prod.outlook.com;PTR:;CAT:NONE;SFS:(13230040)(366016)(52116014)(376014)(1800799024)(7416014)(921020)(38350700014);DIR:OUT;SFP:1101; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: =?utf-8?q?CAj4avnWgPKhvOmPwGk6MG0v9z8T?= =?utf-8?q?P6Y7TurSXNv9jMN3Vc+89xIIvuVrdzUluRYFolpLzdaEPhwuhSnwT/Y3ZPfRGrnIz?= =?utf-8?q?MOg85+Nzyp1sbDLKlFK3leJfT4zdgVNFpWQ3fBgUYiBdTCfdo2oHwaCY6Pkj0FAex?= =?utf-8?q?DiSrDJjMeb7+lBGw98QCGF0Gft23kuIBdPJb1D3NjYEAuGi7WdaJQ8DAgjteLKyul?= =?utf-8?q?YIUPzMvKPnB8l9lG27aS1na2LUKaTNU4KDU5LMHM7lA/vrWdFrwf/qH6s9Di1yMuA?= =?utf-8?q?7ONrNKkDu3d+ZwraY94g5FUm9Cyjc6wjDslUvXy8GxFjZPyOgLU4qs947Y0+u/eJX?= =?utf-8?q?VRXt6XQJi9DAjJjcLvV4sbTXRcd1ABR9et6MQTordrcRYueAjsc30oPSVqMlLLorX?= =?utf-8?q?iTYflB01gnTtfC5ULIdHrBAUg1x6uSmB2Yhz4GdN8MhqLDb9/Z5TR2L+5MmcH9+HB?= =?utf-8?q?NBrg8XPpczp/8IWz85HRivoz2vxtAFkksLDvE62cLVHx5OE0YE9+1+xHBBlyr8fEC?= =?utf-8?q?v+W9SmMzefdUzdKjTlimLpYHesojoSqII0x6/BWUAU+wuNkLo9Il0zHBMBlBM7KT9?= =?utf-8?q?bJzSKm2NW+Uq5aDIDcV7k07oPFvkWaRaO6ZAfmLXXLc5DrEsLViKlpquyLbyhoZXP?= =?utf-8?q?OrhQ2oKV7GNbUDnexIBs1UBRA0O3hrIL8k01fDDmkz3RD7QTckbN+v0nmr2246l9g?= =?utf-8?q?+AG0px2fR0dXTWT2svVfzonZObdmokrApy8r00Ctv4swcorbt2uKiM28ChAlYBydJ?= =?utf-8?q?PH8lYLP7kuXjZ5nbSjSiTsszlL3Ly2PwcjNRKNNvxr0tk1E3ik/bkueIE7WsL9Vmi?= =?utf-8?q?kUbzAM2BPT1AvO1Q1KSjbl/VkPVLvYOIe1PHJ/GB7G8HyciWiYRSbJqpsm3340gvS?= =?utf-8?q?ygZDzmL89gLKnJK4ibDVokdenGv0nG1Fmkh/lLHNRgQnfZP4teATt6pk/gBXD9MTk?= =?utf-8?q?tf66gkf/oB2tJooxd2p563ZZCAhaPt+A35sMpkAhGCcsXKPZL5aq81qh8ai+nmwSf?= =?utf-8?q?HVYNevZXB665xdoJX9ROHEQMi4APdPds75qL+amkdnjC944MQ1/LyO6/9QY8S6r2e?= =?utf-8?q?tEFe1uJ6wp79b9tzG+VQ07Tee9/9bKn2r6UjFCWul4BhSP1gUrjyx1QAidLjnJnLt?= =?utf-8?q?R3oU3YvyqZ7YyoxD+VAlkpJNXgpkM/g5b+m/s0FI3x9Of0Ne/AlWlzaC84+i1PGIh?= =?utf-8?q?HiljP/f5ST53Q9a1htWlAJ7Dv4lIerrq08p9RFKu1xeUH6LZV+DShOLgk0rLDK9zR?= =?utf-8?q?7G8UZEGayHrdTznWbp8SYnr/eiRZuyVGK/HMf4oRhu0bPAASeQptlWt31BiGxDw4C?= =?utf-8?q?ZAObT/SYXaOygar3TFiFbV9HBnuXjzjA9Amc6drRB1Tl3l0Xre8xYHIjxf7O1alhK?= =?utf-8?q?EEVcJiUoUyz2DivkQ6T9MVu6uMN0Nc70APF+EOVGHNXBIML8ZzbtMu1MDwsjCZBzG?= =?utf-8?q?sWXa0JFSAG2o1LMdfsRpBfrhXFyQj3C77LcUMUdnc9CUbId1xEOdpsbztQIB/dt80?= =?utf-8?q?cOCdZ10CyXAn?= X-OriginatorOrg: oss.nxp.com X-MS-Exchange-CrossTenant-Network-Message-Id: ad8d4069-e529-44a3-af25-08dcc351901a X-MS-Exchange-CrossTenant-AuthSource: PAXPR04MB8459.eurprd04.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 23 Aug 2024 08:57:05.8992 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: 686ea1d3-bc2b-4c6f-a92c-d99c5c301635 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: t9q3O0h/cC9iEoHxNgEJjTqIAnY88Lyqttw+CWce8W7KTNshEbGxzZD6aeIKlEMw4NZbraP0b1JBYyCMN5KClQ== X-MS-Exchange-Transport-CrossTenantHeadersStamped: PA1PR04MB10892 From: Peng Fan Add NXP i.MX95 System Control Management Interface(SCMI) vendor extensions protocol documentation. Reviewed-by: Cristian Marussi Signed-off-by: Peng Fan --- drivers/firmware/arm_scmi/vendors/imx/imx95.rst | 886 ++++++++++++++++++++++++ 1 file changed, 886 insertions(+) diff --git a/drivers/firmware/arm_scmi/vendors/imx/imx95.rst b/drivers/firmware/arm_scmi/vendors/imx/imx95.rst new file mode 100644 index 000000000000..6a9e53c17df1 --- /dev/null +++ b/drivers/firmware/arm_scmi/vendors/imx/imx95.rst @@ -0,0 +1,886 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: + +=============================================================================== +i.MX95 System Control and Management Interface(SCMI) Vendor Protocols Extension +=============================================================================== + +:Copyright: |copy| 2024 NXP + +:Author: Peng Fan + +The System Manager (SM) is a low-level system function which runs on a System +Control Processor (SCP) to support isolation and management of power domains, +clocks, resets, sensors, pins, etc. on complex application processors. It often +runs on a Cortex-M processor and provides an abstraction to many of the +underlying features of the hardware. The primary purpose of the SM is to allow +isolation between software running on different cores in the SoC. It does this +by having exclusive access to critical resources such as those controlling +power, clocks, reset, PMIC, etc. and then providing an RPC interface to those +clients. This allows the SM to provide access control, arbitration, and +aggregation policies for those shared critical resources. + +SM introduces a concept Logic Machine(LM) which is analogous to VM and each has +its own instance of SCMI. All normal SCMI calls only apply to that LM. That +includes boot, shutdown, reset, suspend, wake, etc. Each LM (e.g. A55 and M7) +are completely isolated from the others and each LM has its own communication +channels talking to the same SCMI server. + +This document covers all the information necessary to understand, maintain, +port, and deploy the SM on supported processors. + +The SM implements an interface compliant with the Arm SCMI Specification +with additional vendor specific extensions. + +SCMI_BBM: System Control and Management BBM Vendor Protocol +============================================================== + +This protocol is intended provide access to the battery-backed module. This +contains persistent storage (GPR), an RTC, and the ON/OFF button. The protocol +can also provide access to similar functions implemented via external board +components. The BBM protocol provides functions to: + +- Describe the protocol version. +- Discover implementation attributes. +- Read/write GPR +- Discover the RTCs available in the system. +- Read/write the RTC time in seconds and ticks +- Set an alarm (per LM) in seconds +- Get notifications on RTC update, alarm, or rollover. +- Get notification on ON/OFF button activity. + +For most SoC, there is one on-chip RTC (e.g. in BBNSM) and this is RTC ID 0. +Board code can add additional GPR and RTC. + +GPR are not aggregated. The RTC time is also not aggregated. Setting these +sets for all so normally exclusive access would be granted to one agent for +each. However, RTC alarms are maintained for each LM and the hardware is +programmed with the next nearest alarm time. So only one agent in an LM should +be given access rights to set an RTC alarm. + +Commands: +_________ + +PROTOCOL_VERSION +~~~~~~~~~~~~~~~~ + +message_id: 0x0 +protocol_id: 0x81 + ++---------------+--------------------------------------------------------------+ +|Return values | ++---------------+--------------------------------------------------------------+ +|Name |Description | ++---------------+--------------------------------------------------------------+ +|int32 status | See ARM SCMI Specification for status code definitions. | ++---------------+--------------------------------------------------------------+ +|uint32 version | For this revision of the specification, this value must be | +| | 0x10000. | ++---------------+--------------------------------------------------------------+ + +PROTOCOL_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x1 +protocol_id: 0x81 + ++---------------+--------------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status | See ARM SCMI Specification for status code definitions. | ++------------------+-----------------------------------------------------------+ +|uint32 attributes | Bits[31:8] Number of RTCs. | +| | Bits[15:0] Number of persistent storage (GPR) words. | ++------------------+-----------------------------------------------------------+ + +PROTOCOL_MESSAGE_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x2 +protocol_id: 0x81 + ++---------------+--------------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: in case the message is implemented and available | +| |to use. | +| |NOT_FOUND: if the message identified by message_id is | +| |invalid or not implemented | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Flags that are associated with a specific function in the | +| |protocol. For all functions in this protocol, this | +| |parameter has a value of 0 | ++------------------+-----------------------------------------------------------+ + +BBM_GPR_SET +~~~~~~~~~~~ + +message_id: 0x3 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of GPR to write | ++------------------+-----------------------------------------------------------+ +|uint32 value |32-bit value to write to the GPR | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the GPR was successfully written. | +| |NOT_FOUND: if the index is not valid. | +| |DENIED: if the agent does not have permission to write | +| |the specified GPR | ++------------------+-----------------------------------------------------------+ + +BBM_GPR_GET +~~~~~~~~~~~ + +message_id: 0x4 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of GPR to read | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the GPR was successfully read. | +| |NOT_FOUND: if the index is not valid. | +| |DENIED: if the agent does not have permission to read | +| |the specified GPR. | ++------------------+-----------------------------------------------------------+ +|uint32 value |32-bit value read from the GPR | ++------------------+-----------------------------------------------------------+ + +BBM_RTC_ATTRIBUTES +~~~~~~~~~~~~~~~~~~ + +message_id: 0x5 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of RTC | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: returned the attributes. | +| |NOT_FOUND: Index is invalid. | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Bit[31:24] Bit width of RTC seconds. | +| |Bit[23:16] Bit width of RTC ticks. | +| |Bits[15:0] RTC ticks per second | ++------------------+-----------------------------------------------------------+ +|uint8 name[16] |Null-terminated ASCII string of up to 16 bytes in length | +| |describing the RTC name | ++------------------+-----------------------------------------------------------+ + +BBM_RTC_TIME_SET +~~~~~~~~~~~~~~~~ + +message_id: 0x6 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of RTC | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Bits[31:1] Reserved, must be zero. | +| |Bit[0] RTC time format: | +| |Set to 1 if the time is in ticks. | +| |Set to 0 if the time is in seconds | ++------------------+-----------------------------------------------------------+ +|uint32 time[2] |Lower word: Lower 32 bits of the time in seconds/ticks. | +| |Upper word: Upper 32 bits of the time in seconds/ticks. | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: RTC time was successfully set. | +| |NOT_FOUND: rtcId pertains to a non-existent RTC. | +| |INVALID_PARAMETERS: time is not valid | +| |(beyond the range of the RTC). | +| |DENIED: the agent does not have permission to set the RTC. | ++------------------+-----------------------------------------------------------+ + +BBM_RTC_TIME_GET +~~~~~~~~~~~~~~~~ + +message_id: 0x7 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of RTC | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Bits[31:1] Reserved, must be zero. | +| |Bit[0] RTC time format: | +| |Set to 1 if the time is in ticks. | +| |Set to 0 if the time is in seconds | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: RTC time was successfully get. | +| |NOT_FOUND: rtcId pertains to a non-existent RTC. | ++------------------+-----------------------------------------------------------+ +|uint32 time[2] |Lower word: Lower 32 bits of the time in seconds/ticks. | +| |Upper word: Upper 32 bits of the time in seconds/ticks. | ++------------------+-----------------------------------------------------------+ + +BBM_RTC_ALARM_SET +~~~~~~~~~~~~~~~~~ + +message_id: 0x8 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of RTC | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Bits[31:1] Reserved, must be zero. | +| |Bit[0] RTC enable flag: | +| |Set to 1 if the RTC alarm should be enabled. | +| |Set to 0 if the RTC alarm should be disabled | ++------------------+-----------------------------------------------------------+ +|uint32 time[2] |Lower word: Lower 32 bits of the time in seconds. | +| |Upper word: Upper 32 bits of the time in seconds. | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: RTC time was successfully set. | +| |NOT_FOUND: rtcId pertains to a non-existent RTC. | +| |INVALID_PARAMETERS: time is not valid | +| |(beyond the range of the RTC). | +| |DENIED: the agent does not have permission to set the RTC | +| |alarm | ++------------------+-----------------------------------------------------------+ + +BBM_BUTTON_GET +~~~~~~~~~~~~~~ + +message_id: 0x9 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the button status was read. | +| |Other value: ARM SCMI Specification status code definitions| ++------------------+-----------------------------------------------------------+ +|uint32 state |State of the ON/OFF button. 1: ON, 0: OFF | ++------------------+-----------------------------------------------------------+ + +BBM_RTC_NOTIFY +~~~~~~~~~~~~~~ + +message_id: 0xA +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of RTC | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Notification flags | +| |Bits[31:3] Reserved, must be zero. | +| |Bit[2] Update enable: | +| |Set to 1 to send notification. | +| |Set to 0 if no notification. | +| |Bit[1] Rollover enable: | +| |Set to 1 to send notification. | +| |Set to 0 if no notification. | +| |Bit[0] Alarm enable: | +| |Set to 1 to send notification. | +| |Set to 0 if no notification | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: notification configuration was successfully | +| |updated. | +| |NOT_FOUND: rtcId pertains to a non-existent RTC. | +| |DENIED: the agent does not have permission to request RTC | +| |notifications. | ++------------------+-----------------------------------------------------------+ + +BBM_BUTTON_NOTIFY +~~~~~~~~~~~~~~~~~ + +message_id: 0xB +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Notification flags | +| |Bits[31:1] Reserved, must be zero. | +| |Bit[0] Enable button: | +| |Set to 1 to send notification. | +| |Set to 0 if no notification | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: notification configuration was successfully | +| |updated. | +| |DENIED: the agent does not have permission to request | +| |button notifications. | ++------------------+-----------------------------------------------------------+ + +NEGOTIATE_PROTOCOL_VERSION +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x10 +protocol_id: 0x81 + ++--------------------+---------------------------------------------------------+ +|Parameters | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|uint32 version |The negotiated protocol version the agent intends to use | ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: if the negotiated protocol version is supported | +| |by the platform. All commands, responses, and | +| |notifications post successful return of this command must| +| |comply with the negotiated version. | +| |NOT_SUPPORTED: if the protocol version is not supported. | ++--------------------+---------------------------------------------------------+ + +Notifications +_____________ + +BBM_RTC_EVENT +~~~~~~~~~~~~~ + +message_id: 0x0 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 flags |RTC events: | +| |Bits[31:2] Reserved, must be zero. | +| |Bit[1] RTC rollover notification: | +| |1 RTC rollover detected. | +| |0 no RTC rollover detected. | +| |Bit[0] RTC alarm notification: | +| |1 RTC alarm generated. | +| |0 no RTC alarm generated. | ++------------------+-----------------------------------------------------------+ + +BBM_BUTTON_EVENT +~~~~~~~~~~~~~~~~ + +message_id: 0x1 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 flags |RTC events: | ++------------------+-----------------------------------------------------------+ +| |Button events: | +| |Bits[31:1] Reserved, must be zero. | +| |Bit[0] Button notification: | +| |1 button change detected. | +| |0 no button change detected. | ++------------------+-----------------------------------------------------------+ + +SCMI_MISC: System Control and Management MISC Vendor Protocol +================================================================ + +Provides miscellaneous functions. This includes controls that are miscellaneous +settings/actions that must be exposed from the SM to agents. They are device +specific and are usually define to access bit fields in various mix block +control modules, IOMUX_GPR, and other GPR/CSR owned by the SM. This protocol +supports the following functions: + +- Describe the protocol version. +- Discover implementation attributes. +- Set/Get a control. +- Initiate an action on a control. +- Obtain platform (i.e. SM) build information. +- Obtain ROM passover data. +- Read boot/shutdown/reset information for the LM or the system. + +Commands: +_________ + +PROTOCOL_VERSION +~~~~~~~~~~~~~~~~ + +message_id: 0x0 +protocol_id: 0x84 + ++---------------+--------------------------------------------------------------+ +|Return values | ++---------------+--------------------------------------------------------------+ +|Name |Description | ++---------------+--------------------------------------------------------------+ +|int32 status | See ARM SCMI Specification for status code definitions. | ++---------------+--------------------------------------------------------------+ +|uint32 version | For this revision of the specification, this value must be | +| | 0x10000. | ++---------------+--------------------------------------------------------------+ + +PROTOCOL_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x1 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status | See ARM SCMI Specification for status code definitions. | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Protocol attributes: | +| |Bits[31:24] Reserved, must be zero. | +| |Bits[23:16] Number of reset reasons. | +| |Bits[15:0] Number of controls | ++------------------+-----------------------------------------------------------+ + +PROTOCOL_MESSAGE_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x2 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: in case the message is implemented and available | +| |to use. | +| |NOT_FOUND: if the message identified by message_id is | +| |invalid or not implemented | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Flags that are associated with a specific function in the | +| |protocol. For all functions in this protocol, this | +| |parameter has a value of 0 | ++------------------+-----------------------------------------------------------+ + +MISC_CONTROL_SET +~~~~~~~~~~~~~~~~ + +message_id: 0x3 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of the control | ++------------------+-----------------------------------------------------------+ +|uint32 num |Size of the value data in words | ++------------------+-----------------------------------------------------------+ +|uint32 val[8] |value data array | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the control was set successfully. | +| |NOT_FOUND: if the index is not valid. | +| |DENIED: if the agent does not have permission to set the | +| |control | ++------------------+-----------------------------------------------------------+ + +MISC_CONTROL_GET +~~~~~~~~~~~~~~~~ + +message_id: 0x4 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of the control | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the control was get successfully. | +| |NOT_FOUND: if the index is not valid. | +| |DENIED: if the agent does not have permission to get the | +| |control | ++------------------+-----------------------------------------------------------+ +|uint32 num |Size of the return data in words, max 8 | ++------------------+-----------------------------------------------------------+ +|uint32 | | +|val[0, num - 1] |value data array | ++------------------+-----------------------------------------------------------+ + +MISC_CONTROL_ACTION +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x5 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of the control | ++------------------+-----------------------------------------------------------+ +|uint32 action |Action for the control | ++------------------+-----------------------------------------------------------+ +|uint32 numarg |Size of the argument data, max 8 | ++------------------+-----------------------------------------------------------+ +|uint32 | | +|arg[0, numarg -1] |Argument data array | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the action was set successfully. | +| |NOT_FOUND: if the index is not valid. | +| |DENIED: if the agent does not have permission to get the | +| |control | ++------------------+-----------------------------------------------------------+ +|uint32 num |Size of the return data in words, max 8 | ++------------------+-----------------------------------------------------------+ +|uint32 | | +|val[0, num - 1] |value data array | ++------------------+-----------------------------------------------------------+ + +MISC_DISCOVER_BUILD_INFO +~~~~~~~~~~~~~~~~~~~~~~~~ + +This function is used to obtain the build commit, data, time, number. + +message_id: 0x6 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the build info was got successfully. | +| |NOT_SUPPORTED: if the data is not available. | ++------------------+-----------------------------------------------------------+ +|uint32 buildnum |Build number | ++------------------+-----------------------------------------------------------+ +|uint32 buildcommit|Most significant 32 bits of the git commit hash | ++------------------+-----------------------------------------------------------+ +|uint8 date[16] |Date of build. Null terminated ASCII string of up to 16 | +| |bytes in length | ++------------------+-----------------------------------------------------------+ +|uint8 time[16] |Time of build. Null terminated ASCII string of up to 16 | +| |bytes in length | ++------------------+-----------------------------------------------------------+ + +MISC_ROM_PASSOVER_GET +~~~~~~~~~~~~~~~~~~~~~ + +ROM passover data is information exported by ROM and could be used by others. +It includes boot device, instance, type, mode and etc. This function is used +to obtain the ROM passover data. The returned block of words is structured as +defined in the ROM passover section in the SoC RM. + +message_id: 0x7 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the data was got successfully. | +| |NOT_SUPPORTED: if the data is not available. | ++------------------+-----------------------------------------------------------+ +|uint32 num |Size of the passover data in words, max 13 | ++------------------+-----------------------------------------------------------+ +|uint32_t | | +|data[0, num - 1] |Passover data array | ++------------------+-----------------------------------------------------------+ + +MISC_CONTROL_NOTIFY +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x8 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of control | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Notification flags, varies by control | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: notification configuration was successfully | +| |updated. | +| |NOT_FOUND: control id not exists. | +| |INVALID_PARAMETERS: if the input attributes flag specifies | +| |unsupported or invalid configurations.. | +| |DENIED: if the calling agent is not permitted to request | +| |the notification. | ++------------------+-----------------------------------------------------------+ + +MISC_RESET_REASON_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x9 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 reasonid |Identifier for the reason | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if valid reason attributes are returned | +| |NOT_FOUND: if reasonId pertains to a non-existent reason. | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Reason attributes. This parameter has the following | +| |format: Bits[31:0] Reserved, must be zero | +| |Bits[15:0] Number of persistent storage (GPR) words. | ++------------------+-----------------------------------------------------------+ +|uint8 name[16] |Null-terminated ASCII string of up to 16 bytes in length | +| |describing the reason | ++------------------+-----------------------------------------------------------+ + +MISC_RESET_REASON_GET +~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0xA +protocol_id: 0x84 + ++--------------------+---------------------------------------------------------+ +|Parameters | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|uint32 flags |Reason flags. This parameter has the following format: | +| |Bits[31:1] Reserved, must be zero. | +| |Bit[0] System: | +| |Set to 1 to return the system reason. | +| |Set to 0 to return the LM reason | ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: reset reason return | ++--------------------+---------------------------------------------------------+ +|uint32 bootflags |Boot reason flags. This parameter has the format: | +| |Bits[31] Valid. | +| |Set to 1 if the entire reason is valid. | +| |Set to 0 if the entire reason is not valid. | +| |Bits[30:29] Reserved, must be zero. | +| |Bit[28] Valid origin: | +| |Set to 1 if the origin field is valid. | +| |Set to 0 if the origin field is not valid. | +| |Bits[27:24] Origin. | +| |Bit[23] Valid err ID: | +| |Set to 1 if the error ID field is valid. | +| |Set to 0 if the error ID field is not valid. | +| |Bits[22:8] Error ID. | +| |Bit[7:0] Reason | ++--------------------+---------------------------------------------------------+ +|uint32 shutdownflags|Shutdown reason flags. This parameter has the format: | +| |Bits[31] Valid. | +| |Set to 1 if the entire reason is valid. | +| |Set to 0 if the entire reason is not valid. | +| |Bits[30:29] Number of valid extended info words. | +| |Bit[28] Valid origin: | +| |Set to 1 if the origin field is valid. | +| |Set to 0 if the origin field is not valid. | +| |Bits[27:24] Origin. | +| |Bit[23] Valid err ID: | +| |Set to 1 if the error ID field is valid. | +| |Set to 0 if the error ID field is not valid. | +| |Bits[22:8] Error ID. | +| |Bit[7:0] Reason | ++--------------------+---------------------------------------------------------+ +|uint32 extinfo[8] |Array of extended info words | ++--------------------+---------------------------------------------------------+ + +MISC_SI_INFO_GET +~~~~~~~~~~~~~~~~ + +message_id: 0xB +protocol_id: 0x84 + ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: silicon info return | ++--------------------+---------------------------------------------------------+ +|uint32 deviceid |Silicon specific device ID | ++--------------------+---------------------------------------------------------+ +|uint32 sirev |Silicon specific revision | ++--------------------+---------------------------------------------------------+ +|uint32 partnum |Silicon specific part number | ++--------------------+---------------------------------------------------------+ +|uint8 siname[16] |Silicon name/revision. Null terminated ASCII string of up| +| |to 16 bytes in length | ++--------------------+---------------------------------------------------------+ + +MISC_CFG_INFO_GET +~~~~~~~~~~~~~~~~~ + +message_id: 0xC +protocol_id: 0x84 + ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: config name return | +| |NOT_SUPPORTED: name not available | ++--------------------+---------------------------------------------------------+ +|uint32 msel |Mode selector value | ++--------------------+---------------------------------------------------------+ +|uint8 cfgname[16] |config file basename. Null terminated ASCII string of up | +| |to 16 bytes in length | ++--------------------+---------------------------------------------------------+ + +MISC_SYSLOG_GET +~~~~~~~~~~~~~~~ + +message_id: 0xD +protocol_id: 0x84 + ++--------------------+---------------------------------------------------------+ +|Parameters | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|uint32 flags |Device specific flags that might impact the data returned| +| |or clearing of the data | ++--------------------+---------------------------------------------------------+ +|uint32 logindex |Index to the first log word. Will be the first element in| +| |the return array | ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: system log return | ++--------------------+---------------------------------------------------------+ +|uint32 numLogflags |Descriptor for the log data returned by this call. | +| |Bits[31:20] Number of remaining log words. | +| |Bits[15:12] Reserved, must be zero. | +| |Bits[11:0] Number of log words that are returned by this | +| |call | ++--------------------+---------------------------------------------------------+ +|uint32 syslog[N] |Log data array, N is defined in bits[11:0] of numLogflags| ++--------------------+---------------------------------------------------------+ + +NEGOTIATE_PROTOCOL_VERSION +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x10 +protocol_id: 0x84 + ++--------------------+---------------------------------------------------------+ +|Parameters | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|uint32 version |The negotiated protocol version the agent intends to use | ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: if the negotiated protocol version is supported | +| |by the platform. All commands, responses, and | +| |notifications post successful return of this command must| +| |comply with the negotiated version. | +| |NOT_SUPPORTED: if the protocol version is not supported. | ++--------------------+---------------------------------------------------------+ + +Notifications +_____________ + +MISC_CONTROL_EVENT +~~~~~~~~~~~~~~~~~~ + +message_id: 0x0 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 ctrlid |Identifier for the control that caused the event. | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Event flags, varies by control. | ++------------------+-----------------------------------------------------------+