@@ -59,20 +59,6 @@ MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b899
>;
};
- pinctrl_i2c3: i2c3grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899
- MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899
- >;
- };
-
- pinctrl_i2c3_recovery: i2c3recoverygrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b899
- MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b899
- >;
- };
-
pinctrl_pmic: pmicgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b099 /* PMIC irq */
@@ -33,3 +33,19 @@ eeprom@50 {
vcc-supply = <®_3p3v>;
};
};
+
+&iomuxc {
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899
+ >;
+ };
+
+ pinctrl_i2c3_recovery: i2c3recoverygrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b899
+ MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b899
+ >;
+ };
+};
Move the pinmux entries to the variant where they are actual used. No functional changes. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> --- arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi | 14 -------------- arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi | 16 ++++++++++++++++ 2 files changed, 16 insertions(+), 14 deletions(-)