new file mode 100644
@@ -0,0 +1,249 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ite,it6263.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ITE IT6263 LVDS to HDMI converter
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+description: |
+ The IT6263 is a high-performance single-chip De-SSC(De-Spread Spectrum) LVDS
+ to HDMI converter. Combined with LVDS receiver and HDMI 1.4a transmitter,
+ the IT6263 supports LVDS input and HDMI 1.4 output by conversion function.
+ The built-in LVDS receiver can support single-link and dual-link LVDS inputs,
+ and the built-in HDMI transmitter is fully compliant with HDMI 1.4a/3D, HDCP
+ 1.2 and backward compatible with DVI 1.0 specification.
+
+ The IT6263 also encodes and transmits up to 8 channels of I2S digital audio,
+ with sampling rate up to 192KHz and sample size up to 24 bits. In addition,
+ an S/PDIF input port takes in compressed audio of up to 192KHz frame rate.
+
+ The newly supported High-Bit Rate(HBR) audio by HDMI specifications v1.3 is
+ provided by the IT6263 in two interfaces: the four I2S input ports or the
+ S/PDIF input port. With both interfaces the highest possible HBR frame rate
+ is supported at up to 768KHz.
+
+allOf:
+ - $ref: /schemas/display/lvds-dual-ports.yaml#
+
+properties:
+ compatible:
+ const: ite,it6263
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description: audio master clock
+
+ clock-names:
+ const: mclk
+
+ data-mapping:
+ enum:
+ - jeida-18
+ - jeida-24
+ - jeida-30
+ - vesa-24
+ - vesa-30
+
+ data-mirror: true
+
+ reset-gpios:
+ maxItems: 1
+
+ ivdd-supply:
+ description: 1.8V digital logic power
+
+ ovdd-supply:
+ description: 3.3V I/O pin power
+
+ txavcc18-supply:
+ description: 1.8V HDMI analog frontend power
+
+ txavcc33-supply:
+ description: 3.3V HDMI analog frontend power
+
+ pvcc1-supply:
+ description: 1.8V HDMI frontend core PLL power
+
+ pvcc2-supply:
+ description: 1.8V HDMI frontend filter PLL power
+
+ avcc-supply:
+ description: 3.3V LVDS frontend power
+
+ anvdd-supply:
+ description: 1.8V LVDS frontend analog power
+
+ apvdd-supply:
+ description: 1.8V LVDS frontend PLL power
+
+ "#sound-dai-cells":
+ const: 0
+
+ ite,i2s-audio-fifo-sources:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 4
+ items:
+ enum: [0, 1, 2, 3]
+ description:
+ Each array element indicates the pin number of an I2S serial data input
+ line which is connected to an audio FIFO, from audio FIFO0 to FIFO3.
+
+ ite,rl-channel-swap-audio-sources:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 4
+ uniqueItems: true
+ items:
+ enum: [0, 1, 2, 3]
+ description:
+ Each array element indicates an audio source whose right channel and left
+ channel are swapped by this converter. For I2S, the element is the pin
+ number of an I2S serial data input line. For S/PDIF, the element is always
+ 0.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0: true
+
+ port@1: true
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: video port for the HDMI output
+
+ port@3:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: sound input port
+
+ required:
+ - port@0
+ - port@2
+
+required:
+ - compatible
+ - reg
+ - data-mapping
+ - ivdd-supply
+ - ovdd-supply
+ - txavcc18-supply
+ - txavcc33-supply
+ - pvcc1-supply
+ - pvcc2-supply
+ - avcc-supply
+ - anvdd-supply
+ - apvdd-supply
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ /* single-link LVDS input */
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi@4c {
+ compatible = "ite,it6263";
+ reg = <0x4c>;
+ data-mapping = "jeida-24";
+ reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ ivdd-supply = <®_buck5>;
+ ovdd-supply = <®_vext_3v3>;
+ txavcc18-supply = <®_buck5>;
+ txavcc33-supply = <®_vext_3v3>;
+ pvcc1-supply = <®_buck5>;
+ pvcc2-supply = <®_buck5>;
+ avcc-supply = <®_vext_3v3>;
+ anvdd-supply = <®_buck5>;
+ apvdd-supply = <®_buck5>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ it6263_lvds_link1: endpoint {
+ remote-endpoint = <&ldb_lvds_ch0>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ it6263_out: endpoint {
+ remote-endpoint = <&hdmi_in>;
+ };
+ };
+ };
+ };
+ };
+
+ - |
+ /* dual-link LVDS input */
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi@4c {
+ compatible = "ite,it6263";
+ reg = <0x4c>;
+ data-mapping = "jeida-24";
+ reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ ivdd-supply = <®_buck5>;
+ ovdd-supply = <®_vext_3v3>;
+ txavcc18-supply = <®_buck5>;
+ txavcc33-supply = <®_vext_3v3>;
+ pvcc1-supply = <®_buck5>;
+ pvcc2-supply = <®_buck5>;
+ avcc-supply = <®_vext_3v3>;
+ anvdd-supply = <®_buck5>;
+ apvdd-supply = <®_buck5>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dual-lvds-odd-pixels;
+
+ it6263_lvds_link1_dual: endpoint {
+ remote-endpoint = <&ldb_lvds_ch0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dual-lvds-even-pixels;
+
+ it6263_lvds_link2_dual: endpoint {
+ remote-endpoint = <&ldb_lvds_ch1>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ it6263_out_dual: endpoint {
+ remote-endpoint = <&hdmi_in>;
+ };
+ };
+ };
+ };
+ };
Document ITE IT6263 LVDS to HDMI converter. Product link: https://www.ite.com.tw/en/product/cate1/IT6263 Signed-off-by: Liu Ying <victor.liu@nxp.com> --- v3: * Reference lvds-dual-ports.yaml. (Dmitry) * Add data-mapping DT property. (Dmitry, Biju) * Allow data-mirror. * Drop ite,lvds-link-num-data-lanes DT property. (Dmitry, Biju) v2: * Document number of LVDS link data lanes. (Biju) * Simplify ports property by dropping "oneOf". (Rob) .../bindings/display/bridge/ite,it6263.yaml | 249 ++++++++++++++++++ 1 file changed, 249 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml