diff mbox series

[v4,1/3] dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC support

Message ID 20241204074916.880466-2-ciprianmarian.costea@oss.nxp.com (mailing list archive)
State New
Headers show
Series add FlexCAN support for S32G2/S32G3 SoCs | expand

Commit Message

Ciprian Marian Costea Dec. 4, 2024, 7:49 a.m. UTC 
From: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>

Add S32G2/S32G3 SoCs compatible strings.

A particularity for these SoCs is the presence of separate interrupts for
state change, bus errors, MBs 0-7 and MBs 8-127 respectively.

Increase maxItems of 'interrupts' to 4 for S32G based SoCs and keep the
same restriction for other SoCs.

Also, as part of this commit, move the 'allOf' after the required
properties to make the documentation easier to read.

Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
---
 .../bindings/net/can/fsl,flexcan.yaml         | 44 +++++++++++++++++--
 1 file changed, 40 insertions(+), 4 deletions(-)

Comments

Conor Dooley Dec. 4, 2024, 5:57 p.m. UTC | #1 
On Wed, Dec 04, 2024 at 09:49:13AM +0200, Ciprian Costea wrote:
> From: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
> 
> Add S32G2/S32G3 SoCs compatible strings.
> 
> A particularity for these SoCs is the presence of separate interrupts for
> state change, bus errors, MBs 0-7 and MBs 8-127 respectively.
> 
> Increase maxItems of 'interrupts' to 4 for S32G based SoCs and keep the
> same restriction for other SoCs.
> 
> Also, as part of this commit, move the 'allOf' after the required
> properties to make the documentation easier to read.
> 
> Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>

Acked-by: Conor Dooley <conor.dooley@microchip.com>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
index 97dd1a7c5ed2..73252fe56fe6 100644
--- a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
+++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
@@ -10,9 +10,6 @@  title:
 maintainers:
   - Marc Kleine-Budde <mkl@pengutronix.de>
 
-allOf:
-  - $ref: can-controller.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -28,6 +25,7 @@  properties:
           - fsl,vf610-flexcan
           - fsl,ls1021ar2-flexcan
           - fsl,lx2160ar1-flexcan
+          - nxp,s32g2-flexcan
       - items:
           - enum:
               - fsl,imx53-flexcan
@@ -43,12 +41,21 @@  properties:
           - enum:
               - fsl,ls1028ar1-flexcan
           - const: fsl,lx2160ar1-flexcan
+      - items:
+          - enum:
+              - nxp,s32g3-flexcan
+          - const: nxp,s32g2-flexcan
 
   reg:
     maxItems: 1
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 4
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 4
 
   clocks:
     maxItems: 2
@@ -136,6 +143,35 @@  required:
   - reg
   - interrupts
 
+allOf:
+  - $ref: can-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nxp,s32g2-flexcan
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: Message Buffer interrupt for mailboxes 0-7 and Enhanced RX FIFO
+            - description: Device state change
+            - description: Bus Error detection
+            - description: Message Buffer interrupt for mailboxes 8-127
+        interrupt-names:
+          items:
+            - const: mb-0
+            - const: state
+            - const: berr
+            - const: mb-1
+      required:
+        - interrupt-names
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names: false
+
 additionalProperties: false
 
 examples: