| Message ID | 20250214092634.12414-1-francesco@dolcini.it (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [v1] arm64: dts: freescale: imx8mm-verdin: Remove LVDS panel and backlight | expand |
On Fri, Feb 14, 2025 at 10:26:34AM +0100, Francesco Dolcini wrote: > From: Francesco Dolcini <francesco.dolcini@toradex.com> > > Remove LVDS panel and backlight nodes from the Verdin iMX8M Mini SoM > dtsi file, those two hardware components are not part of the SoM, > therefore they should not be present in this file. > > This is solving a dtb checker warning about panel-lvds compatible. > > Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> > --- Thank you very much. Reviewed-by: Frank Li <Frank.Li@nxp.com> > .../boot/dts/freescale/imx8mm-verdin.dtsi | 21 ------------------- > 1 file changed, 21 deletions(-) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi > index c528594ac442..7251ad3a0017 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi > @@ -18,20 +18,6 @@ aliases { > rtc1 = &snvs_rtc; > }; > > - backlight: backlight { > - compatible = "pwm-backlight"; > - brightness-levels = <0 45 63 88 119 158 203 255>; > - default-brightness-level = <4>; > - /* Verdin I2S_2_D_OUT (DSI_1_BKL_EN/DSI_1_BKL_EN_LVDS, SODIMM 46) */ > - enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pinctrl_i2s_2_d_out_dsi_1_bkl_en>; > - power-supply = <®_3p3v>; > - /* Verdin PWM_3_DSI/PWM_3_DSI_LVDS (SODIMM 19) */ > - pwms = <&pwm1 0 6666667 PWM_POLARITY_INVERTED>; > - status = "disabled"; > - }; > - > /* Fixed clock dedicated to SPI CAN controller */ > clk40m: oscillator { > compatible = "fixed-clock"; > @@ -66,13 +52,6 @@ hdmi_connector: hdmi-connector { > status = "disabled"; > }; > > - panel_lvds: panel-lvds { > - compatible = "panel-lvds"; > - backlight = <&backlight>; > - data-mapping = "vesa-24"; > - status = "disabled"; > - }; > - > /* Carrier Board Supplies */ > reg_1p8v: regulator-1p8v { > compatible = "regulator-fixed"; > -- > 2.39.5 >
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi index c528594ac442..7251ad3a0017 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi @@ -18,20 +18,6 @@ aliases { rtc1 = &snvs_rtc; }; - backlight: backlight { - compatible = "pwm-backlight"; - brightness-levels = <0 45 63 88 119 158 203 255>; - default-brightness-level = <4>; - /* Verdin I2S_2_D_OUT (DSI_1_BKL_EN/DSI_1_BKL_EN_LVDS, SODIMM 46) */ - enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2s_2_d_out_dsi_1_bkl_en>; - power-supply = <®_3p3v>; - /* Verdin PWM_3_DSI/PWM_3_DSI_LVDS (SODIMM 19) */ - pwms = <&pwm1 0 6666667 PWM_POLARITY_INVERTED>; - status = "disabled"; - }; - /* Fixed clock dedicated to SPI CAN controller */ clk40m: oscillator { compatible = "fixed-clock"; @@ -66,13 +52,6 @@ hdmi_connector: hdmi-connector { status = "disabled"; }; - panel_lvds: panel-lvds { - compatible = "panel-lvds"; - backlight = <&backlight>; - data-mapping = "vesa-24"; - status = "disabled"; - }; - /* Carrier Board Supplies */ reg_1p8v: regulator-1p8v { compatible = "regulator-fixed";