@@ -36,7 +36,7 @@ memory@10000000 {
backlight_lvds: backlight-lvds {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 200000>;
+ pwms = <&pwm1 0 200000 0>;
brightness-levels = <0 61 499 1706 4079 8022 13938 22237 33328 47623 65535>;
num-interpolated-steps = <10>;
default-brightness-level = <60>;
@@ -117,14 +117,14 @@ led_red: led-0 {
color = <LED_COLOR_ID_RED>;
max-brightness = <248>;
default-state = "off";
- pwms = <&pwm2 0 500000>;
+ pwms = <&pwm2 0 500000 0>;
};
led_white: led-1 {
color = <LED_COLOR_ID_WHITE>;
max-brightness = <248>;
default-state = "off";
- pwms = <&pwm3 0 500000>;
+ pwms = <&pwm3 0 500000 0>;
linux,default-trigger = "heartbeat";
};
};
@@ -484,28 +484,24 @@ lvds0_out: endpoint {
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
};
&pwm2 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm2>;
status = "okay";
};
&pwm3 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
};
&pwm4 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
status = "okay";
The binding dictates using 3 pwm-cells. Adhere to that. This fixes the following dtbs_check warnings: arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dtb: pwm@2084000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dtb: pwm@208c000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> --- arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-)