diff mbox series

[v1,14/49] ARM: dts: imx6qdl-emcon: Use #pwm-cells = <3> for imx27-pwm device

Message ID d267613675279703e87deac33d772a9688d6e048.1712352665.git.u.kleine-koenig@pengutronix.de (mailing list archive)
State In Next, archived
Headers show
Series ARM: dts: imx: Use #pwm-cells = <3> for imx27-pwm device | expand

Commit Message

Uwe Kleine-König April 5, 2024, 9:42 p.m. UTC
The binding dictates using 3 pwm-cells. Adhere to that.

This fixes the following dtbs_check warnings:

	arch/arm/boot/dts/nxp/imx/imx6dl-emcon-avari.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
	arch/arm/boot/dts/nxp/imx/imx6dl-emcon-avari.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
	arch/arm/boot/dts/nxp/imx/imx6dl-emcon-avari.dtb: pwm@208c000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
	arch/arm/boot/dts/nxp/imx/imx6q-emcon-avari.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
	arch/arm/boot/dts/nxp/imx/imx6q-emcon-avari.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
	arch/arm/boot/dts/nxp/imx/imx6q-emcon-avari.dtb: pwm@208c000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
index 42b2ba23aefc..a308a3584b62 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
@@ -66,7 +66,7 @@  lvds_backlight: lvds-backlight {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_lvds_bl>;
 		enable-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
-		pwms = <&pwm1 0 50000>;
+		pwms = <&pwm1 0 50000 0>;
 		brightness-levels = <
 			0 4 8 16 32 64 80 96 112
 			128 144 160 176 250
@@ -78,7 +78,7 @@  lvds_backlight: lvds-backlight {
 	pwm_fan: pwm-fan {
 		compatible = "pwm-fan";
 		#cooling-cells = <2>;
-		pwms = <&pwm4 0 50000>;
+		pwms = <&pwm4 0 50000 0>;
 		cooling-levels = <0 64 127 191 255>;
 		status = "disabled";
 	};
@@ -145,7 +145,7 @@  rgb_backlight: rgb-backlight {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_rgb_bl>;
 		enable-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
-		pwms = <&pwm3 0 5000000>;
+		pwms = <&pwm3 0 5000000 0>;
 		brightness-levels = <
 			250 176 160 144 128 112
 			96 80 64 48 32 16 8 1
@@ -736,17 +736,14 @@  &pcie {
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	status = "okay";
 };