@@ -1173,6 +1173,9 @@ static int i915_load_modeset_init(struct drm_device *dev,
drm_mm_init(&dev_priv->vram, 0, prealloc_size);
DRM_INFO("set up %ldM of stolen space\n", prealloc_size / (1024*1024));
+ /* We're off and running w/KMS */
+ dev_priv->mm.suspended = 0;
+
/* Let GEM Manage from end of prealloc space to end of aperture.
*
* However, leave one page at the end still bound to the scratch page.
@@ -1184,7 +1187,9 @@ static int i915_load_modeset_init(struct drm_device *dev,
*/
i915_gem_do_init(dev, prealloc_size, agp_size - 4096);
+ mutex_lock(&dev->struct_mutex);
ret = i915_gem_init_ringbuffer(dev);
+ mutex_unlock(&dev->struct_mutex);
if (ret)
goto out;
@@ -1433,6 +1438,9 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
return ret;
}
+ /* Start out suspended */
+ dev_priv->mm.suspended = 1;
+
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
ret = i915_load_modeset_init(dev, prealloc_start,
prealloc_size, agp_size);
@@ -127,6 +127,128 @@ static int i915_resume(struct drm_device *dev)
return ret;
}
+/**
+ * i965_reset - reset chip after a hang
+ * @dev: drm device to reset
+ * @flags: reset domains
+ *
+ * Reset the chip. Useful if a hang is detected.
+ *
+ * Procedure is fairly simple:
+ * - reset the chip using the reset reg
+ * - re-init context state
+ * - re-init hardware status page
+ * - re-init ring buffer
+ * - re-init interrupt state
+ * - re-init display
+ */
+void i965_reset(struct drm_device *dev, u8 flags)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ unsigned long timeout;
+ u8 gdrst;
+ /*
+ * We really should only reset the display subsystem if we actually
+ * need to
+ */
+ bool need_display = true;
+
+ mutex_lock(&dev->struct_mutex);
+
+ /*
+ * Clear request list
+ */
+ i915_gem_retire_requests(dev);
+
+ if (need_display)
+ i915_save_display(dev);
+
+ if (IS_I965G(dev) || IS_G4X(dev)) {
+ /*
+ * Set the domains we want to reset, then the reset bit (bit 0).
+ * Clear the reset bit after a while and wait for hardware status
+ * bit (bit 1) to be set
+ */
+ pci_read_config_byte(dev->pdev, GDRST, &gdrst);
+ pci_write_config_byte(dev->pdev, GDRST, gdrst | flags | ((flags == GDRST_FULL) ? 0x1 : 0x0));
+ udelay(50);
+ pci_write_config_byte(dev->pdev, GDRST, gdrst & 0xfe);
+
+ /* ...we don't want to loop forever though, 500ms should be plenty */
+ timeout = jiffies + msecs_to_jiffies(500);
+ do {
+ udelay(100);
+ pci_read_config_byte(dev->pdev, GDRST, &gdrst);
+ } while ((gdrst & 0x1) && time_after(timeout, jiffies));
+
+ if (gdrst & 0x1) {
+ WARN(true, "i915: Failed to reset chip\n");
+ mutex_unlock(&dev->struct_mutex);
+ return;
+ }
+ } else {
+ DRM_ERROR("Error occurred. Don't know how to reset this chip.\n");
+ return;
+ }
+
+ /* Ok, now get things going again... */
+
+ /*
+ * Everything depends on having the GTT running, so we need to start
+ * there. Fortunately we don't need to do this unless we reset the
+ * chip at a PCI level.
+ *
+ * Next we need to restore the context, but we don't use those
+ * yet either...
+ *
+ * Ring buffer needs to be re-initialized in the KMS case, or if X
+ * was running at the time of the reset (i.e. we weren't VT
+ * switched away).
+ */
+ if (drm_core_check_feature(dev, DRIVER_MODESET) ||
+ !dev_priv->mm.suspended) {
+ drm_i915_ring_buffer_t *ring = &dev_priv->ring;
+ struct drm_gem_object *obj = ring->ring_obj;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ dev_priv->mm.suspended = 0;
+
+ /* Stop the ring if it's running. */
+ I915_WRITE(PRB0_CTL, 0);
+ I915_WRITE(PRB0_TAIL, 0);
+ I915_WRITE(PRB0_HEAD, 0);
+
+ /* Initialize the ring. */
+ I915_WRITE(PRB0_START, obj_priv->gtt_offset);
+ I915_WRITE(PRB0_CTL,
+ ((obj->size - 4096) & RING_NR_PAGES) |
+ RING_NO_REPORT |
+ RING_VALID);
+ if (!drm_core_check_feature(dev, DRIVER_MODESET))
+ i915_kernel_lost_context(dev);
+ else {
+ ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
+ ring->tail = I915_READ(PRB0_TAIL) & TAIL_ADDR;
+ ring->space = ring->head - (ring->tail + 8);
+ if (ring->space < 0)
+ ring->space += ring->Size;
+ }
+
+ mutex_unlock(&dev->struct_mutex);
+ drm_irq_uninstall(dev);
+ drm_irq_install(dev);
+ mutex_lock(&dev->struct_mutex);
+ }
+
+ /*
+ * Display needs restore too...
+ */
+ if (need_display)
+ i915_restore_display(dev);
+
+ mutex_unlock(&dev->struct_mutex);
+}
+
+
static int __devinit
i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
@@ -624,6 +624,7 @@ extern long i915_compat_ioctl(struct file *filp, unsigned int cmd,
extern int i915_emit_box(struct drm_device *dev,
struct drm_clip_rect *boxes,
int i, int DR1, int DR4);
+extern void i965_reset(struct drm_device *dev, u8 flags);
/* i915_irq.c */
void i915_hangcheck_elapsed(unsigned long data);
@@ -482,6 +482,14 @@ static void i915_handle_error(struct drm_device *dev)
I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
}
+ if (dev_priv->mm.wedged) {
+ /*
+ * Wakeup waiting processes so they don't hang
+ */
+ printk("i915: Waking up sleeping processes\n");
+ DRM_WAKEUP(&dev_priv->irq_queue);
+ }
+
queue_work(dev_priv->wq, &dev_priv->error_work);
}
@@ -85,6 +85,10 @@
#define I915_GC_RENDER_CLOCK_200_MHZ (1 << 0)
#define I915_GC_RENDER_CLOCK_333_MHZ (4 << 0)
#define LBB 0xf4
+#define GDRST 0xc0
+#define GDRST_FULL (0<<2)
+#define GDRST_RENDER (1<<2)
+#define GDRST_MEDIA (3<<2)
/* VGA stuff */