[2/3] drm/i915: Make the BPC in FDI rx/transcoder be consistent with that in pipeconf on Ironlake

Commit Message

Zhao, Yakui Jan. 5, 2010, 2:48 p.m. UTC

None

Patch

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 149d360..3b12dfd 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2325,6 +2325,7 @@ 
 #define  FDI_RX_DISABLE         (0<<31)
 /* train, dp width same as FDI_TX */
 #define  FDI_DP_PORT_WIDTH_X8           (7<<19)
+#define  FDI_BPC_MASK			(7<<16)
 #define  FDI_8BPC                       (0<<16)
 #define  FDI_10BPC                      (1<<16)
 #define  FDI_6BPC                       (2<<16)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 7784e52..0b68327 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1493,6 +1493,10 @@  static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
 	int trans_vsync_reg = (pipe == 0) ? TRANS_VSYNC_A : TRANS_VSYNC_B;
 	u32 temp;
 	int tries = 5, j, n;
+	u32 pipe_bpc;
+
+	temp = I915_READ(pipeconf_reg);
+	pipe_bpc = temp & PIPE_BPC_MASK;
 
 	/* XXX: When our outputs are all unaware of DPMS modes other than off
 	 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
@@ -1524,6 +1528,12 @@  static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
 
 			/* enable PCH FDI RX PLL, wait warmup plus DMI latency */
 			temp = I915_READ(fdi_rx_reg);
+			/*
+			 * make the BPC in FDI Rx be consistent with that in
+			 * pipeconf reg.
+			 */
+			temp &= ~FDI_BPC_MASK;
+			temp |= (pipe_bpc << 11);
 			I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE |
 					FDI_SEL_PCDCLK |
 					FDI_DP_PORT_WIDTH_X4); /* default 4 lanes */
@@ -1666,6 +1676,12 @@  static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
 
 			/* enable PCH transcoder */
 			temp = I915_READ(transconf_reg);
+			/*
+			 * make the BPC in transcoder be consistent with
+			 * that in pipeconf reg.
+			 */
+			temp &= ~PIPE_BPC_MASK;
+			temp |= pipe_bpc;
 			I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
 			I915_READ(transconf_reg);