@@ -1582,9 +1582,10 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
*/
temp &= ~(0x7 << 16);
temp |= (pipe_bpc << 11);
+ temp &= ~(7 << 19);
+ temp |= (intel_crtc->fdi_lanes - 1) << 19;
I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE |
- FDI_SEL_PCDCLK |
- FDI_DP_PORT_WIDTH_X4); /* default 4 lanes */
+ FDI_SEL_PCDCLK);
I915_READ(fdi_rx_reg);
udelay(200);
@@ -1630,7 +1631,8 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
/* enable CPU FDI TX and PCH FDI RX */
temp = I915_READ(fdi_tx_reg);
temp |= FDI_TX_ENABLE;
- temp |= FDI_DP_PORT_WIDTH_X4; /* default */
+ temp &= ~(7 << 19);
+ temp |= (intel_crtc->fdi_lanes - 1) << 19;
temp &= ~FDI_LINK_TRAIN_NONE;
temp |= FDI_LINK_TRAIN_PATTERN_1;
I915_WRITE(fdi_tx_reg, temp);
@@ -3043,7 +3045,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
/* FDI link */
if (HAS_PCH_SPLIT(dev)) {
- int lane, link_bw, bpp;
+ int lane = 0, link_bw, bpp;
/* eDP doesn't require FDI link, so just set DP M/N
according to current link config */
if (is_edp) {
@@ -3059,7 +3061,6 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
target_clock = mode->clock;
else
target_clock = adjusted_mode->clock;
- lane = 4;
link_bw = 270000;
}
@@ -3111,6 +3112,18 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
bpp = 24;
}
+ if (!lane) {
+ /*
+ * Account for spread spectrum to avoid
+ * oversubscribing the link. Max center spread
+ * is 2.5%; use 5% for safety's sake.
+ */
+ u32 bps = target_clock * bpp * 19 / 20;
+ lane = bps / (link_bw * 8) + 1;
+ }
+
+ intel_crtc->fdi_lanes = lane;
+
ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n);
}
@@ -154,6 +154,7 @@ struct intel_crtc {
bool lowfreq_avail;
struct intel_overlay *overlay;
struct intel_unpin_work *unpin_work;
+ int fdi_lanes;
};
#define to_intel_crtc(x) container_of(x, struct intel_crtc, base)