@@ -135,6 +135,7 @@ struct sdvo_device_mapping {
u8 slave_addr;
u8 dvo_wiring;
u8 initialized;
+ u8 ddc_pin;
};
struct drm_i915_error_state {
@@ -366,6 +366,7 @@ parse_sdvo_device_mapping(struct drm_i915_private *dev_priv,
p_mapping->dvo_port = p_child->dvo_port;
p_mapping->slave_addr = p_child->slave_addr;
p_mapping->dvo_wiring = p_child->dvo_wiring;
+ p_mapping->ddc_pin = p_child->ddc_pin;
p_mapping->initialized = 1;
} else {
DRM_DEBUG_KMS("Maybe one SDVO port is shared by "
@@ -2053,40 +2053,17 @@ static const struct drm_encoder_funcs intel_sdvo_enc_funcs = {
* outputs, then LVDS outputs.
*/
static void
-intel_sdvo_select_ddc_bus(struct intel_sdvo_priv *dev_priv)
+intel_sdvo_select_ddc_bus(struct drm_i915_private *dev_priv,
+ struct intel_sdvo_priv *sdvo, u32 reg)
{
- uint16_t mask = 0;
- unsigned int num_bits;
+ struct sdvo_device_mapping *mapping;
- /* Make a mask of outputs less than or equal to our own priority in the
- * list.
- */
- switch (dev_priv->controlled_output) {
- case SDVO_OUTPUT_LVDS1:
- mask |= SDVO_OUTPUT_LVDS1;
- case SDVO_OUTPUT_LVDS0:
- mask |= SDVO_OUTPUT_LVDS0;
- case SDVO_OUTPUT_TMDS1:
- mask |= SDVO_OUTPUT_TMDS1;
- case SDVO_OUTPUT_TMDS0:
- mask |= SDVO_OUTPUT_TMDS0;
- case SDVO_OUTPUT_RGB1:
- mask |= SDVO_OUTPUT_RGB1;
- case SDVO_OUTPUT_RGB0:
- mask |= SDVO_OUTPUT_RGB0;
- break;
- }
-
- /* Count bits to find what number we are in the priority list. */
- mask &= dev_priv->caps.output_flags;
- num_bits = hweight16(mask);
- if (num_bits > 3) {
- /* if more than 3 outputs, default to DDC bus 3 for now */
- num_bits = 3;
- }
+ if (IS_SDVOB(reg))
+ mapping = &(dev_priv->sdvo_mappings[0]);
+ else
+ mapping = &(dev_priv->sdvo_mappings[1]);
- /* Corresponds to SDVO_CONTROL_BUS_DDCx */
- dev_priv->ddc_bus = 1 << num_bits;
+ sdvo->ddc_bus = (mapping->ddc_pin & 0xf0) >> 4;
}
static bool
@@ -2863,7 +2840,7 @@ bool intel_sdvo_init(struct drm_device *dev, int sdvo_reg)
goto err_i2c;
}
- intel_sdvo_select_ddc_bus(sdvo_priv);
+ intel_sdvo_select_ddc_bus(dev_priv, sdvo_priv, sdvo_reg);
/* Set the input timing to the screen. Assume always input 0. */
intel_sdvo_set_target_input(intel_encoder, true, false);