diff mbox

[4/6] drm/i915/pch: Set transcoder sync polarity for DP based on actual mode

Message ID 1279305992-19619-4-git-send-email-ajax@redhat.com (mailing list archive)
State Deferred, archived
Headers show

Commit Message

Adam Jackson July 16, 2010, 6:46 p.m. UTC 
None
diff mbox

Patch

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index b1b742b..889f4ed 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1983,9 +1983,12 @@  static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
 				reg = I915_READ(trans_dp_ctl);
 				reg &= ~TRANS_DP_PORT_SEL_MASK;
 				reg = TRANS_DP_OUTPUT_ENABLE |
-				      TRANS_DP_ENH_FRAMING |
-				      TRANS_DP_VSYNC_ACTIVE_HIGH |
-				      TRANS_DP_HSYNC_ACTIVE_HIGH;
+				      TRANS_DP_ENH_FRAMING;
+
+				if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
+				      reg |= TRANS_DP_HSYNC_ACTIVE_HIGH;
+				if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
+				      reg |= TRANS_DP_VSYNC_ACTIVE_HIGH;
 
 				switch (intel_trans_dp_port_sel(crtc)) {
 				case PCH_DP_B: