@@ -2045,6 +2045,31 @@ static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
atomic_read(&obj->pending_flip) == 0);
}
+static bool intel_crtc_driving_pch(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct intel_encoder *encoder;
+
+ /*
+ * If there's a non-PCH eDP on this crtc, it must be DP_A, and that
+ * must be driven by its own crtc; no sharing is possible.
+ */
+ list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
+ if (encoder->base.crtc != crtc)
+ continue;
+
+ switch (encoder->type) {
+ case INTEL_OUTPUT_EDP:
+ if (!intel_encoder_is_pch_edp(&encoder->base))
+ return false;
+ continue;
+ }
+ }
+
+ return true;
+}
+
static void ironlake_crtc_enable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
@@ -2053,6 +2078,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
u32 reg, temp;
+ bool is_pch_port = false;
if (intel_crtc->active)
return;
@@ -2066,7 +2092,56 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
}
- ironlake_fdi_enable(crtc);
+ is_pch_port = intel_crtc_driving_pch(crtc);
+
+ if (is_pch_port)
+ ironlake_fdi_enable(crtc);
+ else {
+ /* disable CPU FDI tx and PCH FDI rx */
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
+ POSTING_READ(reg);
+
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~(0x7 << 16);
+ temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+ I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
+
+ POSTING_READ(reg);
+ udelay(100);
+
+ /* Ironlake workaround, disable clock pointer after downing FDI */
+ if (HAS_PCH_IBX(dev))
+ I915_WRITE(FDI_RX_CHICKEN(pipe),
+ I915_READ(FDI_RX_CHICKEN(pipe) &
+ ~FDI_RX_PHASE_SYNC_POINTER_ENABLE));
+
+ /* still set train pattern 1 */
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_1;
+ I915_WRITE(reg, temp);
+
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ if (HAS_PCH_CPT(dev)) {
+ temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+ temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+ } else {
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_1;
+ }
+ /* BPC in FDI rx is consistent with that in PIPECONF */
+ temp &= ~(0x07 << 16);
+ temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+ I915_WRITE(reg, temp);
+
+ POSTING_READ(reg);
+ udelay(100);
+ }
/* Enable panel fitting for LVDS */
if (dev_priv->pch_pf_size &&
@@ -2100,6 +2175,10 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
intel_flush_display_plane(dev, plane);
}
+ /* Skip the PCH stuff if possible */
+ if (!is_pch_port)
+ goto done;
+
/* For PCH output, training FDI link */
if (IS_GEN6(dev))
gen6_fdi_link_train(crtc);
@@ -2184,7 +2263,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
I915_WRITE(reg, temp | TRANS_ENABLE);
if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
DRM_ERROR("failed to enable transcoder %d\n", pipe);
-
+done:
intel_crtc_load_lut(crtc);
intel_update_fbc(dev);
intel_crtc_update_cursor(crtc, true);