From patchwork Wed Mar 30 20:01:07 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Eric Anholt X-Patchwork-Id: 675051 Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) by demeter1.kernel.org (8.14.4/8.14.3) with ESMTP id p2UK5B7c030715 for ; Wed, 30 Mar 2011 20:05:31 GMT Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id 7AB779E828 for ; Wed, 30 Mar 2011 13:05:11 -0700 (PDT) X-Original-To: intel-gfx@lists.freedesktop.org Delivered-To: intel-gfx@lists.freedesktop.org Received: from annarchy.freedesktop.org (annarchy.freedesktop.org [131.252.210.176]) by gabe.freedesktop.org (Postfix) with ESMTP id 4B0A89E768; Wed, 30 Mar 2011 13:01:19 -0700 (PDT) Received: from pollan.anholt.net (annarchy.freedesktop.org [127.0.0.1]) by annarchy.freedesktop.org (Postfix) with ESMTP id CE9B213000C; Wed, 30 Mar 2011 13:01:18 -0700 (PDT) Received: by pollan.anholt.net (Postfix, from userid 1000) id 901FB32C05B; Wed, 30 Mar 2011 13:01:15 -0700 (PDT) From: Eric Anholt To: intel-gfx@lists.freedesktop.org Date: Wed, 30 Mar 2011 13:01:07 -0700 Message-Id: <1301515270-3768-7-git-send-email-eric@anholt.net> X-Mailer: git-send-email 1.7.4.1 In-Reply-To: <1301515270-3768-1-git-send-email-eric@anholt.net> References: <1301515270-3768-1-git-send-email-eric@anholt.net> Subject: [Intel-gfx] [PATCH 6/9] drm/i915: Drop non-HAS_PCH_SPLIT() code from ironlake_crtc_mode_set(). X-BeenThere: intel-gfx@lists.freedesktop.org X-Mailman-Version: 2.1.11 Precedence: list List-Id: Intel graphics driver community testing & development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: intel-gfx-bounces+patchwork-intel-gfx=patchwork.kernel.org@lists.freedesktop.org Errors-To: intel-gfx-bounces+patchwork-intel-gfx=patchwork.kernel.org@lists.freedesktop.org X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.6 (demeter1.kernel.org [140.211.167.41]); Wed, 30 Mar 2011 20:05:31 +0000 (UTC) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 4254228..496bee9 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4932,7 +4932,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, struct fdi_m_n m_n = {0}; u32 reg, temp; u32 lvds_sync = 0; - int target_clock; + int target_clock, pixel_multiplier, lane, link_bw, bpp, factor; list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { if (encoder->base.crtc != crtc) @@ -4974,8 +4974,8 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, refclk / 1000); } else if (!IS_GEN2(dev)) { refclk = 96000; - if (HAS_PCH_SPLIT(dev) && - (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base))) + if (!has_edp_encoder || + intel_encoder_is_pch_edp(&has_edp_encoder->base)) refclk = 120000; /* 120Mhz refclk */ } else { refclk = 48000; @@ -5034,140 +5034,137 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, } /* FDI link */ - if (HAS_PCH_SPLIT(dev)) { - int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); - int lane = 0, link_bw, bpp; - /* CPU eDP doesn't require FDI link, so just set DP M/N - according to current link config */ - if (has_edp_encoder && !intel_encoder_is_pch_edp(&has_edp_encoder->base)) { + pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); + lane = 0; + /* CPU eDP doesn't require FDI link, so just set DP M/N + according to current link config */ + if (has_edp_encoder && + !intel_encoder_is_pch_edp(&has_edp_encoder->base)) { + target_clock = mode->clock; + intel_edp_link_config(has_edp_encoder, + &lane, &link_bw); + } else { + /* [e]DP over FDI requires target mode clock + instead of link clock */ + if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) target_clock = mode->clock; - intel_edp_link_config(has_edp_encoder, - &lane, &link_bw); - } else { - /* [e]DP over FDI requires target mode clock - instead of link clock */ - if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) - target_clock = mode->clock; - else - target_clock = adjusted_mode->clock; - - /* FDI is a binary signal running at ~2.7GHz, encoding - * each output octet as 10 bits. The actual frequency - * is stored as a divider into a 100MHz clock, and the - * mode pixel clock is stored in units of 1KHz. - * Hence the bw of each lane in terms of the mode signal - * is: - */ - link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10; - } + else + target_clock = adjusted_mode->clock; + + /* FDI is a binary signal running at ~2.7GHz, encoding + * each output octet as 10 bits. The actual frequency + * is stored as a divider into a 100MHz clock, and the + * mode pixel clock is stored in units of 1KHz. + * Hence the bw of each lane in terms of the mode signal + * is: + */ + link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10; + } - /* determine panel color depth */ - temp = I915_READ(PIPECONF(pipe)); - temp &= ~PIPE_BPC_MASK; - if (is_lvds) { - /* the BPC will be 6 if it is 18-bit LVDS panel */ - if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP) - temp |= PIPE_8BPC; - else - temp |= PIPE_6BPC; - } else if (has_edp_encoder) { - switch (dev_priv->edp.bpp/3) { - case 8: - temp |= PIPE_8BPC; - break; - case 10: - temp |= PIPE_10BPC; - break; - case 6: - temp |= PIPE_6BPC; - break; - case 12: - temp |= PIPE_12BPC; - break; - } - } else + /* determine panel color depth */ + temp = I915_READ(PIPECONF(pipe)); + temp &= ~PIPE_BPC_MASK; + if (is_lvds) { + /* the BPC will be 6 if it is 18-bit LVDS panel */ + if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP) + temp |= PIPE_8BPC; + else + temp |= PIPE_6BPC; + } else if (has_edp_encoder) { + switch (dev_priv->edp.bpp/3) { + case 8: temp |= PIPE_8BPC; - I915_WRITE(PIPECONF(pipe), temp); - - switch (temp & PIPE_BPC_MASK) { - case PIPE_8BPC: - bpp = 24; break; - case PIPE_10BPC: - bpp = 30; + case 10: + temp |= PIPE_10BPC; break; - case PIPE_6BPC: - bpp = 18; + case 6: + temp |= PIPE_6BPC; break; - case PIPE_12BPC: - bpp = 36; + case 12: + temp |= PIPE_12BPC; break; - default: - DRM_ERROR("unknown pipe bpc value\n"); - bpp = 24; - } - - if (!lane) { - /* - * Account for spread spectrum to avoid - * oversubscribing the link. Max center spread - * is 2.5%; use 5% for safety's sake. - */ - u32 bps = target_clock * bpp * 21 / 20; - lane = bps / (link_bw * 8) + 1; } + } else + temp |= PIPE_8BPC; + I915_WRITE(PIPECONF(pipe), temp); - intel_crtc->fdi_lanes = lane; + switch (temp & PIPE_BPC_MASK) { + case PIPE_8BPC: + bpp = 24; + break; + case PIPE_10BPC: + bpp = 30; + break; + case PIPE_6BPC: + bpp = 18; + break; + case PIPE_12BPC: + bpp = 36; + break; + default: + DRM_ERROR("unknown pipe bpc value\n"); + bpp = 24; + } - if (pixel_multiplier > 1) - link_bw *= pixel_multiplier; - ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n); + if (!lane) { + /* + * Account for spread spectrum to avoid + * oversubscribing the link. Max center spread + * is 2.5%; use 5% for safety's sake. + */ + u32 bps = target_clock * bpp * 21 / 20; + lane = bps / (link_bw * 8) + 1; } + intel_crtc->fdi_lanes = lane; + + if (pixel_multiplier > 1) + link_bw *= pixel_multiplier; + ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n); + /* Ironlake: try to setup display ref clock before DPLL * enabling. This is only under driver's control after * PCH B stepping, previous chipset stepping should be * ignoring this setting. */ - if (HAS_PCH_SPLIT(dev)) { - temp = I915_READ(PCH_DREF_CONTROL); - /* Always enable nonspread source */ - temp &= ~DREF_NONSPREAD_SOURCE_MASK; - temp |= DREF_NONSPREAD_SOURCE_ENABLE; - temp &= ~DREF_SSC_SOURCE_MASK; - temp |= DREF_SSC_SOURCE_ENABLE; - I915_WRITE(PCH_DREF_CONTROL, temp); - - POSTING_READ(PCH_DREF_CONTROL); - udelay(200); - - if (has_edp_encoder) { - if (intel_panel_use_ssc(dev_priv)) { - temp |= DREF_SSC1_ENABLE; - I915_WRITE(PCH_DREF_CONTROL, temp); - - POSTING_READ(PCH_DREF_CONTROL); - udelay(200); - } - temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK; + temp = I915_READ(PCH_DREF_CONTROL); + /* Always enable nonspread source */ + temp &= ~DREF_NONSPREAD_SOURCE_MASK; + temp |= DREF_NONSPREAD_SOURCE_ENABLE; + temp &= ~DREF_SSC_SOURCE_MASK; + temp |= DREF_SSC_SOURCE_ENABLE; + I915_WRITE(PCH_DREF_CONTROL, temp); + + POSTING_READ(PCH_DREF_CONTROL); + udelay(200); - /* Enable CPU source on CPU attached eDP */ - if (!intel_encoder_is_pch_edp(&has_edp_encoder->base)) { - if (intel_panel_use_ssc(dev_priv)) - temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD; - else - temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD; - } else { - /* Enable SSC on PCH eDP if needed */ - if (intel_panel_use_ssc(dev_priv)) { - DRM_ERROR("enabling SSC on PCH\n"); - temp |= DREF_SUPERSPREAD_SOURCE_ENABLE; - } - } + if (has_edp_encoder) { + if (intel_panel_use_ssc(dev_priv)) { + temp |= DREF_SSC1_ENABLE; I915_WRITE(PCH_DREF_CONTROL, temp); + POSTING_READ(PCH_DREF_CONTROL); udelay(200); } + temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK; + + /* Enable CPU source on CPU attached eDP */ + if (!intel_encoder_is_pch_edp(&has_edp_encoder->base)) { + if (intel_panel_use_ssc(dev_priv)) + temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD; + else + temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD; + } else { + /* Enable SSC on PCH eDP if needed */ + if (intel_panel_use_ssc(dev_priv)) { + DRM_ERROR("enabling SSC on PCH\n"); + temp |= DREF_SUPERSPREAD_SOURCE_ENABLE; + } + } + I915_WRITE(PCH_DREF_CONTROL, temp); + POSTING_READ(PCH_DREF_CONTROL); + udelay(200); } if (IS_PINEVIEW(dev)) { @@ -5183,24 +5180,19 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, } /* Enable autotuning of the PLL clock (if permissible) */ - if (HAS_PCH_SPLIT(dev)) { - int factor = 21; - - if (is_lvds) { - if ((intel_panel_use_ssc(dev_priv) && - dev_priv->lvds_ssc_freq == 100) || - (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) - factor = 25; - } else if (is_sdvo && is_tv) - factor = 20; + factor = 21; + if (is_lvds) { + if ((intel_panel_use_ssc(dev_priv) && + dev_priv->lvds_ssc_freq == 100) || + (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) + factor = 25; + } else if (is_sdvo && is_tv) + factor = 20; - if (clock.m1 < factor * clock.n) - fp |= FP_CB_TUNE; - } + if (clock.m1 < factor * clock.n) + fp |= FP_CB_TUNE; dpll = 0; - if (!HAS_PCH_SPLIT(dev)) - dpll = DPLL_VGA_MODE_DIS; if (!IS_GEN2(dev)) { if (is_lvds) @@ -5212,7 +5204,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, if (pixel_multiplier > 1) { if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; - else if (HAS_PCH_SPLIT(dev)) + else dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT; } dpll |= DPLL_DVO_HIGH_SPEED; @@ -5226,8 +5218,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, else { dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; /* also FPA1 */ - if (HAS_PCH_SPLIT(dev)) - dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; + dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; if (IS_G4X(dev) && has_reduced_clock) dpll |= (1 << (reduced_clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; } @@ -5245,8 +5236,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; break; } - if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) - dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT); } else { if (is_lvds) { dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; @@ -5277,15 +5266,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, /* Set up the display plane register */ dspcntr = DISPPLANE_GAMMA_ENABLE; - /* Ironlake's plane is forced to pipe, bit 24 is to - enable color space conversion */ - if (!HAS_PCH_SPLIT(dev)) { - if (pipe == 0) - dspcntr &= ~DISPPLANE_SEL_PIPE_MASK; - else - dspcntr |= DISPPLANE_SEL_PIPE_B; - } - if (pipe == 0 && INTEL_INFO(dev)->gen < 4) { /* Enable pixel doubling when the dot clock is > 90% of the (display) * core speed. @@ -5300,20 +5280,12 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, pipeconf &= ~PIPECONF_DOUBLE_WIDE; } - if (!HAS_PCH_SPLIT(dev)) - dpll |= DPLL_VCO_ENABLE; - DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); drm_mode_debug_printmodeline(mode); /* assign to Ironlake registers */ - if (HAS_PCH_SPLIT(dev)) { - fp_reg = PCH_FP0(pipe); - dpll_reg = PCH_DPLL(pipe); - } else { - fp_reg = FP0(pipe); - dpll_reg = DPLL(pipe); - } + fp_reg = PCH_FP0(pipe); + dpll_reg = PCH_DPLL(pipe); /* PCH eDP needs FDI, but CPU eDP does not */ if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) { @@ -5352,9 +5324,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, * things on. */ if (is_lvds) { - reg = LVDS; - if (HAS_PCH_SPLIT(dev)) - reg = PCH_LVDS; + reg = PCH_LVDS; temp = I915_READ(reg); temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; @@ -5383,13 +5353,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, * appropriately here, but we need to look more thoroughly into how * panels behave in the two modes. */ - /* set the dithering flag on non-PCH LVDS as needed */ - if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) { - if (dev_priv->lvds_dither) - temp |= LVDS_ENABLE_DITHER; - else - temp &= ~LVDS_ENABLE_DITHER; - } if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) lvds_sync |= LVDS_HSYNC_POLARITY; if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) @@ -5410,18 +5373,16 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, } /* set the dithering flag and clear for anything other than a panel. */ - if (HAS_PCH_SPLIT(dev)) { - pipeconf &= ~PIPECONF_DITHER_EN; - pipeconf &= ~PIPECONF_DITHER_TYPE_MASK; - if (dev_priv->lvds_dither && (is_lvds || has_edp_encoder)) { - pipeconf |= PIPECONF_DITHER_EN; - pipeconf |= PIPECONF_DITHER_TYPE_ST1; - } + pipeconf &= ~PIPECONF_DITHER_EN; + pipeconf &= ~PIPECONF_DITHER_TYPE_MASK; + if (dev_priv->lvds_dither && (is_lvds || has_edp_encoder)) { + pipeconf |= PIPECONF_DITHER_EN; + pipeconf |= PIPECONF_DITHER_TYPE_ST1; } if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) { intel_dp_set_m_n(crtc, mode, adjusted_mode); - } else if (HAS_PCH_SPLIT(dev)) { + } else { /* For non-DP output, clear any trans DP clock recovery setting.*/ I915_WRITE(TRANSDATA_M1(pipe), 0); I915_WRITE(TRANSDATA_N1(pipe), 0); @@ -5429,31 +5390,20 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(TRANSDPLINK_N1(pipe), 0); } - if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) { + if (!has_edp_encoder || + intel_encoder_is_pch_edp(&has_edp_encoder->base)) { I915_WRITE(dpll_reg, dpll); /* Wait for the clocks to stabilize. */ POSTING_READ(dpll_reg); udelay(150); - if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) { - temp = 0; - if (is_sdvo) { - temp = intel_mode_get_pixel_multiplier(adjusted_mode); - if (temp > 1) - temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT; - else - temp = 0; - } - I915_WRITE(DPLL_MD(pipe), temp); - } else { - /* The pixel multiplier can only be updated once the - * DPLL is enabled and the clocks are stable. - * - * So write it again. - */ - I915_WRITE(dpll_reg, dpll); - } + /* The pixel multiplier can only be updated once the + * DPLL is enabled and the clocks are stable. + * + * So write it again. + */ + I915_WRITE(dpll_reg, dpll); } intel_crtc->lowfreq_avail = false; @@ -5504,33 +5454,24 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16)); - /* pipesrc and dspsize control the size that is scaled from, - * which should always be the user's requested size. + /* pipesrc controls the size that is scaled from, which should + * always be the user's requested size. */ - if (!HAS_PCH_SPLIT(dev)) { - I915_WRITE(DSPSIZE(plane), - ((mode->vdisplay - 1) << 16) | - (mode->hdisplay - 1)); - I915_WRITE(DSPPOS(plane), 0); - } I915_WRITE(PIPESRC(pipe), ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); - if (HAS_PCH_SPLIT(dev)) { - I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m); - I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n); - I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m); - I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n); + I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m); + I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n); + I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m); + I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n); - if (has_edp_encoder && !intel_encoder_is_pch_edp(&has_edp_encoder->base)) { - ironlake_set_pll_edp(crtc, adjusted_mode->clock); - } + if (has_edp_encoder && + !intel_encoder_is_pch_edp(&has_edp_encoder->base)) { + ironlake_set_pll_edp(crtc, adjusted_mode->clock); } I915_WRITE(PIPECONF(pipe), pipeconf); POSTING_READ(PIPECONF(pipe)); - if (!HAS_PCH_SPLIT(dev)) - intel_enable_pipe(dev_priv, pipe, false); intel_wait_for_vblank(dev, pipe); @@ -5542,8 +5483,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(DSPCNTR(plane), dspcntr); POSTING_READ(DSPCNTR(plane)); - if (!HAS_PCH_SPLIT(dev)) - intel_enable_plane(dev_priv, plane, pipe); ret = intel_pipe_set_base(crtc, x, y, old_fb);