@@ -61,6 +61,29 @@ static struct intel_crt *intel_encoder_to_crt(struct intel_encoder *encoder)
return container_of(encoder, struct intel_crt, base);
}
+static void intel_disable_crt(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+ struct intel_crt *crt = intel_encoder_to_crt(encoder);
+ u32 temp;
+
+ temp = I915_READ(crt->adpa_reg);
+ temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
+ temp &= ~ADPA_DAC_ENABLE;
+ I915_WRITE(crt->adpa_reg, temp);
+}
+
+static void intel_enable_crt(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+ struct intel_crt *crt = intel_encoder_to_crt(encoder);
+ u32 temp;
+
+ temp = I915_READ(crt->adpa_reg);
+ temp |= ADPA_DAC_ENABLE;
+ I915_WRITE(crt->adpa_reg, temp);
+}
+
static void pch_crt_dpms(struct drm_encoder *encoder, int mode)
{
struct drm_device *dev = encoder->dev;
@@ -582,18 +605,20 @@ static void intel_crt_reset(struct drm_connector *connector)
static const struct drm_encoder_helper_funcs pch_encoder_funcs = {
.mode_fixup = intel_crt_mode_fixup,
- .prepare = intel_encoder_prepare,
- .commit = intel_encoder_commit,
+ .prepare = intel_encoder_noop,
+ .commit = intel_encoder_noop,
.mode_set = intel_crt_mode_set,
.dpms = pch_crt_dpms,
+ .disable = intel_encoder_disable,
};
static const struct drm_encoder_helper_funcs gmch_encoder_funcs = {
.mode_fixup = intel_crt_mode_fixup,
- .prepare = intel_encoder_prepare,
- .commit = intel_encoder_commit,
+ .prepare = intel_encoder_noop,
+ .commit = intel_encoder_noop,
.mode_set = intel_crt_mode_set,
.dpms = gmch_crt_dpms,
+ .disable = intel_encoder_disable,
};
static const struct drm_connector_funcs intel_crt_connector_funcs = {
@@ -691,6 +716,9 @@ void intel_crt_init(struct drm_device *dev)
else
crt->adpa_reg = ADPA;
+ crt->base.disable = intel_disable_crt;
+ crt->base.enable = intel_enable_crt;
+
drm_encoder_helper_add(&crt->base.base, encoder_helper_funcs);
drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
CRT is the first output which can be cloned, hence we cannot (yet) move the dpms handling over to disable/enable. This requires some more smarts in intel_crtc_dpms first to set the display pipe status depening upon encoder->connectors_active of all connected encoders. Because that will happen in a separate step, don't touch the dpms functions, yet. v2: Be careful about clearing the _DISABLE flags for intermediate dpms modes - otherwise we might clobber the crt state when another (cloned) connector gets enabled. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> --- drivers/gpu/drm/i915/intel_crt.c | 36 ++++++++++++++++++++++++++++++++---- 1 files changed, 32 insertions(+), 4 deletions(-)