@@ -238,7 +238,6 @@ struct drm_i915_error_state {
};
struct drm_i915_display_funcs {
- void (*dpms)(struct drm_crtc *crtc, int mode);
bool (*fbc_enabled)(struct drm_device *dev);
void (*enable_fbc)(struct drm_crtc *crtc, unsigned long interval);
void (*disable_fbc)(struct drm_device *dev);
@@ -255,6 +254,8 @@ struct drm_i915_display_funcs {
struct drm_display_mode *adjusted_mode,
int x, int y,
struct drm_framebuffer *old_fb);
+ void (*crtc_enable)(struct drm_crtc *crtc);
+ void (*crtc_disable)(struct drm_crtc *crtc);
void (*off)(struct drm_crtc *crtc);
void (*write_eld)(struct drm_connector *connector,
struct drm_crtc *crtc);
@@ -3299,30 +3299,6 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
mutex_unlock(&dev->struct_mutex);
}
-static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
-{
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- int pipe = intel_crtc->pipe;
- int plane = intel_crtc->plane;
-
- /* XXX: When our outputs are all unaware of DPMS modes other than off
- * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
- */
- switch (mode) {
- case DRM_MODE_DPMS_ON:
- case DRM_MODE_DPMS_STANDBY:
- case DRM_MODE_DPMS_SUSPEND:
- DRM_DEBUG_KMS("crtc %d/%d dpms on\n", pipe, plane);
- ironlake_crtc_enable(crtc);
- break;
-
- case DRM_MODE_DPMS_OFF:
- DRM_DEBUG_KMS("crtc %d/%d dpms off\n", pipe, plane);
- ironlake_crtc_disable(crtc);
- break;
- }
-}
-
static void ironlake_crtc_off(struct drm_crtc *crtc)
{
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
@@ -3402,23 +3378,6 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
intel_update_watermarks(dev);
}
-static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
-{
- /* XXX: When our outputs are all unaware of DPMS modes other than off
- * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
- */
- switch (mode) {
- case DRM_MODE_DPMS_ON:
- case DRM_MODE_DPMS_STANDBY:
- case DRM_MODE_DPMS_SUSPEND:
- i9xx_crtc_enable(crtc);
- break;
- case DRM_MODE_DPMS_OFF:
- i9xx_crtc_disable(crtc);
- break;
- }
-}
-
static void i9xx_crtc_off(struct drm_crtc *crtc)
{
}
@@ -3440,7 +3399,20 @@ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
intel_crtc->dpms_mode = mode;
- dev_priv->display.dpms(crtc, mode);
+ /* XXX: When our outputs are all unaware of DPMS modes other than off
+ * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
+ */
+ switch (mode) {
+ case DRM_MODE_DPMS_ON:
+ case DRM_MODE_DPMS_STANDBY:
+ case DRM_MODE_DPMS_SUSPEND:
+ dev_priv->display.crtc_enable(crtc);
+ break;
+
+ case DRM_MODE_DPMS_OFF:
+ dev_priv->display.crtc_disable(crtc);
+ break;
+ }
if (!dev->primary->master)
return;
@@ -6940,13 +6912,15 @@ static void intel_init_display(struct drm_device *dev)
/* We always want a DPMS function */
if (HAS_PCH_SPLIT(dev)) {
- dev_priv->display.dpms = ironlake_crtc_dpms;
dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
+ dev_priv->display.crtc_enable = ironlake_crtc_enable;
+ dev_priv->display.crtc_disable = ironlake_crtc_disable;
dev_priv->display.off = ironlake_crtc_off;
dev_priv->display.update_plane = ironlake_update_plane;
} else {
- dev_priv->display.dpms = i9xx_crtc_dpms;
dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
+ dev_priv->display.crtc_enable = i9xx_crtc_enable;
+ dev_priv->display.crtc_disable = i9xx_crtc_disable;
dev_priv->display.off = i9xx_crtc_off;
dev_priv->display.update_plane = i9xx_update_plane;
}
Because that's what we're essentially calling. This is the first step in untangling the crtc_helper induced dpms handling mess we have - at the crtc level we only have 2 states and the magic is just in selectin which one (and atm there isn't even much magic, but on recent platforms where not even the crt output has more than 2 states we could do better). Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> --- drivers/gpu/drm/i915/i915_drv.h | 3 +- drivers/gpu/drm/i915/intel_display.c | 62 ++++++++++------------------------ 2 files changed, 20 insertions(+), 45 deletions(-)