@@ -5653,7 +5653,7 @@ bool intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,
goto fail;
}
- if (!drm_crtc_helper_set_mode(crtc, mode, 0, 0, old_fb)) {
+ if (!intel_crtc_set_mode(crtc, mode, 0, 0, old_fb)) {
DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
if (old->release_fb)
old->release_fb->funcs->destroy(old->release_fb);
@@ -6597,6 +6597,158 @@ intel_crtc_helper_disable(struct drm_crtc *crtc)
return 0;
}
+static void
+intel_encoder_disable_helper(struct drm_encoder *encoder)
+{
+ struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
+
+ if (encoder_funcs->disable)
+ (*encoder_funcs->disable)(encoder);
+ else
+ (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
+}
+
+static void
+intel_crtc_prepare_encoders(struct drm_device *dev)
+{
+ struct drm_encoder_helper_funcs *encoder_funcs;
+ struct drm_encoder *encoder;
+
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ encoder_funcs = encoder->helper_private;
+ /* Disable unused encoders */
+ if (encoder->crtc == NULL)
+ intel_encoder_disable_helper(encoder);
+ /* Disable encoders whose CRTC is about to change */
+ if (encoder_funcs->get_crtc &&
+ encoder->crtc != (*encoder_funcs->get_crtc)(encoder))
+ intel_encoder_disable_helper(encoder);
+ }
+}
+
+bool intel_crtc_set_mode(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_display_mode *adjusted_mode, saved_mode, saved_hwmode;
+ struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+ struct drm_encoder_helper_funcs *encoder_funcs;
+ int saved_x, saved_y;
+ struct drm_encoder *encoder;
+ bool ret = true;
+
+ crtc->enabled = drm_helper_crtc_in_use(crtc);
+ if (!crtc->enabled)
+ return true;
+
+ adjusted_mode = drm_mode_duplicate(dev, mode);
+ if (!adjusted_mode)
+ return false;
+
+ saved_hwmode = crtc->hwmode;
+ saved_mode = crtc->mode;
+ saved_x = crtc->x;
+ saved_y = crtc->y;
+
+ /* Update crtc values up front so the driver can rely on them for mode
+ * setting.
+ */
+ crtc->mode = *mode;
+ crtc->x = x;
+ crtc->y = y;
+
+ /* Pass our mode to the connectors and the CRTC to give them a chance to
+ * adjust it according to limitations or connector properties, and also
+ * a chance to reject the mode entirely.
+ */
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+
+ if (encoder->crtc != crtc)
+ continue;
+ encoder_funcs = encoder->helper_private;
+ if (!(ret = encoder_funcs->mode_fixup(encoder, mode,
+ adjusted_mode))) {
+ DRM_DEBUG_KMS("Encoder fixup failed\n");
+ goto done;
+ }
+ }
+
+ if (!(ret = crtc_funcs->mode_fixup(crtc, mode, adjusted_mode))) {
+ DRM_DEBUG_KMS("CRTC fixup failed\n");
+ goto done;
+ }
+ DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id);
+
+ /* Prepare the encoders and CRTCs before setting the mode. */
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+
+ if (encoder->crtc != crtc)
+ continue;
+ encoder_funcs = encoder->helper_private;
+ /* Disable the encoders as the first thing we do. */
+ encoder_funcs->prepare(encoder);
+ }
+
+ intel_crtc_prepare_encoders(dev);
+
+ crtc_funcs->prepare(crtc);
+
+ /* Set up the DPLL and any encoders state that needs to adjust or depend
+ * on the DPLL.
+ */
+ ret = !crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb);
+ if (!ret)
+ goto done;
+
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+
+ if (encoder->crtc != crtc)
+ continue;
+
+ DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%d:%s]\n",
+ encoder->base.id, drm_get_encoder_name(encoder),
+ mode->base.id, mode->name);
+ encoder_funcs = encoder->helper_private;
+ encoder_funcs->mode_set(encoder, mode, adjusted_mode);
+ }
+
+ /* Now enable the clocks, plane, pipe, and connectors that we set up. */
+ crtc_funcs->commit(crtc);
+
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+
+ if (encoder->crtc != crtc)
+ continue;
+
+ encoder_funcs = encoder->helper_private;
+ encoder_funcs->commit(encoder);
+
+ }
+
+ /* Store real post-adjustment hardware mode. */
+ crtc->hwmode = *adjusted_mode;
+
+ /* Calculate and store various constants which
+ * are later needed by vblank and swap-completion
+ * timestamping. They are derived from true hwmode.
+ */
+ drm_calc_timestamping_constants(crtc);
+
+ /* FIXME: add subpixel order */
+done:
+ drm_mode_destroy(dev, adjusted_mode);
+ if (!ret) {
+ crtc->hwmode = saved_hwmode;
+ crtc->mode = saved_mode;
+ crtc->x = saved_x;
+ crtc->y = saved_y;
+ }
+
+ return ret;
+}
+
static int intel_crtc_set_config(struct drm_mode_set *set)
{
struct drm_device *dev;
@@ -6779,7 +6931,7 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
drm_mode_debug_printmodeline(set->mode);
old_fb = set->crtc->fb;
set->crtc->fb = set->fb;
- if (!drm_crtc_helper_set_mode(set->crtc, set->mode,
+ if (!intel_crtc_set_mode(set->crtc, set->mode,
set->x, set->y,
old_fb)) {
DRM_ERROR("failed to set mode on [CRTC:%d]\n",
@@ -6835,8 +6987,8 @@ fail:
/* Try to restore the config */
if (mode_changed &&
- !drm_crtc_helper_set_mode(save_set.crtc, save_set.mode, save_set.x,
- save_set.y, save_set.fb))
+ !intel_crtc_set_mode(save_set.crtc, save_set.mode, save_set.x,
+ save_set.y, save_set.fb))
DRM_ERROR("failed to restore config after modeset failure\n");
kfree(save_connectors);
@@ -2322,9 +2322,9 @@ intel_dp_set_property(struct drm_connector *connector,
done:
if (intel_dp->base.base.crtc) {
struct drm_crtc *crtc = intel_dp->base.base.crtc;
- drm_crtc_helper_set_mode(crtc, &crtc->mode,
- crtc->x, crtc->y,
- crtc->fb);
+ intel_crtc_set_mode(crtc, &crtc->mode,
+ crtc->x, crtc->y,
+ crtc->fb);
}
return 0;
@@ -373,6 +373,10 @@ extern void intel_panel_disable_backlight(struct drm_device *dev);
extern void intel_panel_destroy_backlight(struct drm_device *dev);
extern enum drm_connector_status intel_panel_detect(struct drm_device *dev);
+extern bool intel_crtc_set_mode(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ int x, int y,
+ struct drm_framebuffer *old_fb);
extern void intel_crtc_load_lut(struct drm_crtc *crtc);
extern void intel_crtc_update_dpms(struct drm_crtc *crtc);
extern void intel_encoder_noop(struct drm_encoder *encoder);
@@ -869,9 +869,9 @@ intel_hdmi_set_property(struct drm_connector *connector,
done:
if (intel_hdmi->base.base.crtc) {
struct drm_crtc *crtc = intel_hdmi->base.base.crtc;
- drm_crtc_helper_set_mode(crtc, &crtc->mode,
- crtc->x, crtc->y,
- crtc->fb);
+ intel_crtc_set_mode(crtc, &crtc->mode,
+ crtc->x, crtc->y,
+ crtc->fb);
}
return 0;
@@ -560,8 +560,9 @@ static int intel_lvds_set_property(struct drm_connector *connector,
* If the CRTC is enabled, the display will be changed
* according to the new panel fitting mode.
*/
- drm_crtc_helper_set_mode(crtc, &crtc->mode,
- crtc->x, crtc->y, crtc->fb);
+ intel_crtc_set_mode(crtc, &crtc->mode,
+ crtc->x, crtc->y,
+ crtc->fb);
}
}
@@ -1876,8 +1876,8 @@ set_value:
done:
if (intel_sdvo->base.base.crtc) {
struct drm_crtc *crtc = intel_sdvo->base.base.crtc;
- drm_crtc_helper_set_mode(crtc, &crtc->mode, crtc->x,
- crtc->y, crtc->fb);
+ intel_crtc_set_mode(crtc, &crtc->mode,
+ crtc->x, crtc->y, crtc->fb);
}
return 0;
@@ -1477,8 +1477,8 @@ intel_tv_set_property(struct drm_connector *connector, struct drm_property *prop
}
if (changed && crtc)
- drm_crtc_helper_set_mode(crtc, &crtc->mode, crtc->x,
- crtc->y, crtc->fb);
+ intel_crtc_set_mode(crtc, &crtc->mode,
+ crtc->x, crtc->y, crtc->fb);
out:
return ret;
}
Together with the static helpers drm_crtc_prepare_encoders and drm_encoder_disable (which will be simplified in the next patch, but for now are 1:1 copies). Again, no changes beside new names for these functions. Also call our new set_mode instead of the crtc helper one now in all the places we've done so far. Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> --- drivers/gpu/drm/i915/intel_display.c | 160 +++++++++++++++++++++++++++++++++- drivers/gpu/drm/i915/intel_dp.c | 6 +- drivers/gpu/drm/i915/intel_drv.h | 4 + drivers/gpu/drm/i915/intel_hdmi.c | 6 +- drivers/gpu/drm/i915/intel_lvds.c | 5 +- drivers/gpu/drm/i915/intel_sdvo.c | 4 +- drivers/gpu/drm/i915/intel_tv.c | 4 +- 7 files changed, 173 insertions(+), 16 deletions(-)