@@ -5142,6 +5142,185 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
return ret;
}
+static int haswell_crtc_mode_set(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode,
+ int x, int y,
+ struct drm_framebuffer *fb)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ int plane = intel_crtc->plane;
+ int num_connectors = 0;
+ intel_clock_t clock, reduced_clock;
+ u32 dpll, fp = 0, fp2 = 0;
+ bool ok, has_reduced_clock = false;
+ bool is_lvds = false, is_dp = false, is_cpu_edp = false;
+ struct intel_encoder *encoder;
+ u32 temp;
+ int ret;
+ bool dither;
+
+ for_each_encoder_on_crtc(dev, crtc, encoder) {
+ switch (encoder->type) {
+ case INTEL_OUTPUT_LVDS:
+ is_lvds = true;
+ break;
+ case INTEL_OUTPUT_DISPLAYPORT:
+ is_dp = true;
+ break;
+ case INTEL_OUTPUT_EDP:
+ is_dp = true;
+ if (!intel_encoder_is_pch_edp(&encoder->base))
+ is_cpu_edp = true;
+ break;
+ }
+
+ num_connectors++;
+ }
+
+ ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock,
+ &has_reduced_clock, &reduced_clock);
+ if (!ok) {
+ DRM_ERROR("Couldn't find PLL settings for mode!\n");
+ return -EINVAL;
+ }
+
+ /* Ensure that the cursor is valid for the new mode before changing... */
+ intel_crtc_update_cursor(crtc, true);
+
+ /* determine panel color depth */
+ dither = intel_choose_pipe_bpp_dither(crtc, fb, &intel_crtc->bpp, mode);
+ if (is_lvds && dev_priv->lvds_dither)
+ dither = true;
+
+ fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
+ if (has_reduced_clock)
+ fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
+ reduced_clock.m2;
+
+ dpll = ironlake_compute_dpll(intel_crtc, adjusted_mode, &clock, fp);
+
+ DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
+ drm_mode_debug_printmodeline(mode);
+
+ /* CPU eDP is the only output that doesn't need a PCH PLL of its own on
+ * pre-Haswell/LPT generation */
+ if (HAS_PCH_LPT(dev)) {
+ DRM_DEBUG_KMS("LPT detected: no PLL for pipe %d necessary\n",
+ pipe);
+ } else if (!is_cpu_edp) {
+ struct intel_pch_pll *pll;
+
+ pll = intel_get_pch_pll(intel_crtc, dpll, fp);
+ if (pll == NULL) {
+ DRM_DEBUG_DRIVER("failed to find PLL for pipe %d\n",
+ pipe);
+ return -EINVAL;
+ }
+ } else
+ intel_put_pch_pll(intel_crtc);
+
+ /* The LVDS pin pair needs to be on before the DPLLs are enabled.
+ * This is an exception to the general rule that mode_set doesn't turn
+ * things on.
+ */
+ if (is_lvds) {
+ temp = I915_READ(PCH_LVDS);
+ temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
+ if (HAS_PCH_CPT(dev)) {
+ temp &= ~PORT_TRANS_SEL_MASK;
+ temp |= PORT_TRANS_SEL_CPT(pipe);
+ } else {
+ if (pipe == 1)
+ temp |= LVDS_PIPEB_SELECT;
+ else
+ temp &= ~LVDS_PIPEB_SELECT;
+ }
+
+ /* set the corresponsding LVDS_BORDER bit */
+ temp |= dev_priv->lvds_border_bits;
+ /* Set the B0-B3 data pairs corresponding to whether we're going to
+ * set the DPLLs for dual-channel mode or not.
+ */
+ if (clock.p2 == 7)
+ temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
+ else
+ temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
+
+ /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
+ * appropriately here, but we need to look more thoroughly into how
+ * panels behave in the two modes.
+ */
+ temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
+ if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
+ temp |= LVDS_HSYNC_POLARITY;
+ if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
+ temp |= LVDS_VSYNC_POLARITY;
+ I915_WRITE(PCH_LVDS, temp);
+ }
+
+ if (is_dp && !is_cpu_edp) {
+ intel_dp_set_m_n(crtc, mode, adjusted_mode);
+ } else {
+ /* For non-DP output, clear any trans DP clock recovery setting.*/
+ I915_WRITE(TRANSDATA_M1(pipe), 0);
+ I915_WRITE(TRANSDATA_N1(pipe), 0);
+ I915_WRITE(TRANSDPLINK_M1(pipe), 0);
+ I915_WRITE(TRANSDPLINK_N1(pipe), 0);
+ }
+
+ if (intel_crtc->pch_pll) {
+ I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
+
+ /* Wait for the clocks to stabilize. */
+ POSTING_READ(intel_crtc->pch_pll->pll_reg);
+ udelay(150);
+
+ /* The pixel multiplier can only be updated once the
+ * DPLL is enabled and the clocks are stable.
+ *
+ * So write it again.
+ */
+ I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
+ }
+
+ intel_crtc->lowfreq_avail = false;
+ if (intel_crtc->pch_pll) {
+ if (is_lvds && has_reduced_clock && i915_powersave) {
+ I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp2);
+ intel_crtc->lowfreq_avail = true;
+ } else {
+ I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp);
+ }
+ }
+
+ intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
+
+ ironlake_set_m_n(crtc, mode, adjusted_mode);
+
+ if (is_cpu_edp)
+ ironlake_set_pll_edp(crtc, adjusted_mode->clock);
+
+ ironlake_set_pipeconf(crtc, adjusted_mode, dither);
+
+ intel_wait_for_vblank(dev, pipe);
+
+ /* Set up the display plane register */
+ I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE);
+ POSTING_READ(DSPCNTR(plane));
+
+ ret = intel_pipe_set_base(crtc, x, y, fb);
+
+ intel_update_watermarks(dev);
+
+ intel_update_linetime_watermarks(dev, pipe, adjusted_mode);
+
+ return ret;
+}
+
static int intel_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
@@ -7852,7 +8031,13 @@ static void intel_init_display(struct drm_device *dev)
struct drm_i915_private *dev_priv = dev->dev_private;
/* We always want a DPMS function */
- if (HAS_PCH_SPLIT(dev)) {
+ if (IS_HASWELL(dev)) {
+ dev_priv->display.crtc_mode_set = haswell_crtc_mode_set;
+ dev_priv->display.crtc_enable = ironlake_crtc_enable;
+ dev_priv->display.crtc_disable = ironlake_crtc_disable;
+ dev_priv->display.off = ironlake_crtc_off;
+ dev_priv->display.update_plane = ironlake_update_plane;
+ } else if (HAS_PCH_SPLIT(dev)) {
dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
dev_priv->display.crtc_enable = ironlake_crtc_enable;
dev_priv->display.crtc_disable = ironlake_crtc_disable;