diff mbox

drm/i915/vlv: enable HDMI audio for Valleyview2

Message ID 1382325121-8590-1-git-send-email-mengdong.lin@intel.com (mailing list archive)
State New, archived
Headers show

Commit Message

Lin, Mengdong Oct. 21, 2013, 3:12 a.m. UTC 
From: Mengdong Lin <mengdong.lin@intel.com>

This patch defines audio configuration registers and adds audio enabling code
for Valleyview2.

Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
diff mbox

Patch

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 9538502..04e5a8b 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4844,6 +4844,18 @@ 
 					CPT_AUD_CNTL_ST_B)
 #define CPT_AUD_CNTRL_ST2		0xE50C0
 
+#define VLV_HDMIW_HDMIEDID_A		(VLV_DISPLAY_BASE + 0x62050)
+#define VLV_HDMIW_HDMIEDID_B		(VLV_DISPLAY_BASE + 0x62150)
+#define VLV_HDMIW_HDMIEDID(pipe) _PIPE(pipe, \
+					VLV_HDMIW_HDMIEDID_A, \
+					VLV_HDMIW_HDMIEDID_B)
+#define VLV_AUD_CNTL_ST_A		(VLV_DISPLAY_BASE + 0x620B4)
+#define VLV_AUD_CNTL_ST_B		(VLV_DISPLAY_BASE + 0x621B4)
+#define VLV_AUD_CNTL_ST(pipe) _PIPE(pipe, \
+					VLV_AUD_CNTL_ST_A, \
+					VLV_AUD_CNTL_ST_B)
+#define VLV_AUD_CNTL_ST2		(VLV_DISPLAY_BASE + 0x620C0)
+
 /* These are the 4 32-bit write offset registers for each stream
  * output buffer.  It determines the offset from the
  * 3DSTATE_SO_BUFFERs that the next streamed vertex output goes to.
@@ -4860,6 +4872,12 @@ 
 #define CPT_AUD_CFG(pipe) _PIPE(pipe, \
 					CPT_AUD_CONFIG_A, \
 					CPT_AUD_CONFIG_B)
+#define VLV_AUD_CONFIG_A			0x62000
+#define VLV_AUD_CONFIG_B			0x62100
+#define VLV_AUD_CFG(pipe) _PIPE(pipe, \
+					VLV_AUD_CONFIG_A, \
+					VLV_AUD_CONFIG_B)
+
 #define   AUD_CONFIG_N_VALUE_INDEX		(1 << 29)
 #define   AUD_CONFIG_N_PROG_ENABLE		(1 << 28)
 #define   AUD_CONFIG_UPPER_N_SHIFT		20
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index ebe5d08..25abba96 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -6896,6 +6896,11 @@  static void ironlake_write_eld(struct drm_connector *connector,
 		aud_config = IBX_AUD_CFG(pipe);
 		aud_cntl_st = IBX_AUD_CNTL_ST(pipe);
 		aud_cntrl_st2 = IBX_AUD_CNTL_ST2;
+	} else if (IS_VALLEYVIEW(connector->dev)) {
+		hdmiw_hdmiedid = VLV_HDMIW_HDMIEDID(pipe);
+		aud_config = VLV_AUD_CFG(pipe);
+		aud_cntl_st = VLV_AUD_CNTL_ST(pipe);
+		aud_cntrl_st2 = VLV_AUD_CNTL_ST2;
 	} else {
 		hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID(pipe);
 		aud_config = CPT_AUD_CFG(pipe);
@@ -6905,8 +6910,19 @@  static void ironlake_write_eld(struct drm_connector *connector,
 
 	DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe));
 
-	i = I915_READ(aud_cntl_st);
-	i = (i >> 29) & DIP_PORT_SEL_MASK;		/* DIP_Port_Select, 0x1 = PortB */
+	if (IS_VALLEYVIEW(connector->dev))  {
+		struct intel_encoder *intel_encoder;
+		int port = 0;
+		intel_encoder = intel_attached_encoder(connector);
+		if (intel_encoder)
+			port = intel_ddi_get_encoder_port(intel_encoder);
+		i = port;
+	} else {
+		i = I915_READ(aud_cntl_st);
+		i = (i >> 29) & DIP_PORT_SEL_MASK;
+		/* DIP_Port_Select, 0x1 = PortB */
+	}
+
 	if (!i) {
 		DRM_DEBUG_DRIVER("Audio directed to unknown port\n");
 		/* operate blindly on all ports */
@@ -10195,7 +10211,8 @@  static void intel_init_display(struct drm_device *dev)
 		}
 	} else if (IS_G4X(dev)) {
 		dev_priv->display.write_eld = g4x_write_eld;
-	}
+	} else if (IS_VALLEYVIEW(dev))
+		dev_priv->display.write_eld = ironlake_write_eld;
 
 	/* Default just returns -ENODEV to indicate unsupported */
 	dev_priv->display.queue_flip = intel_default_queue_flip;