@@ -796,6 +796,7 @@ struct i915_fbc {
struct i915_drrs {
bool is_psr_enabled;
+ struct intel_connector *connector;
};
struct i915_psr {
@@ -3255,6 +3255,7 @@ enum punit_power_well {
#define PIPECONF_INTERLACED_DBL_ILK (4 << 21) /* ilk/snb only */
#define PIPECONF_PFIT_PF_INTERLACED_DBL_ILK (5 << 21) /* ilk/snb only */
#define PIPECONF_INTERLACE_MODE_MASK (7 << 21)
+#define PIPECONF_EDP_RR_MODE_SWITCH (1 << 20)
#define PIPECONF_CXSR_DOWNCLOCK (1<<16)
#define PIPECONF_COLOR_RANGE_SELECT (1 << 13)
#define PIPECONF_BPC_MASK (0x7 << 5)
@@ -736,6 +736,20 @@ intel_dp_set_clock(struct intel_encoder *encoder,
}
}
+static void
+intel_dp_set_m2_n2(struct intel_crtc *crtc, struct intel_link_m_n *m_n)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ enum transcoder transcoder = crtc->config.cpu_transcoder;
+
+ I915_WRITE(PIPE_DATA_M2(transcoder),
+ TU_SIZE(m_n->tu) | m_n->gmch_m);
+ I915_WRITE(PIPE_DATA_N2(transcoder), m_n->gmch_n);
+ I915_WRITE(PIPE_LINK_M2(transcoder), m_n->link_m);
+ I915_WRITE(PIPE_LINK_N2(transcoder), m_n->link_n);
+}
+
bool
intel_dp_compute_config(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config)
@@ -840,6 +854,15 @@ found:
pipe_config->port_clock,
&pipe_config->dp_m_n);
+ if (intel_connector->panel.downclock_mode != NULL &&
+ intel_dp->drrs_state.type == SEAMLESS_DRRS_SUPPORT) {
+ intel_link_compute_m_n(bpp, lane_count,
+ intel_connector->panel.downclock_mode->clock,
+ pipe_config->port_clock,
+ &pipe_config->dp_m2_n2);
+ }
+
+
intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw);
return true;
@@ -3620,6 +3643,90 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
I915_READ(pp_div_reg));
}
+void intel_dp_set_drrs_state(struct drm_device *dev, int refresh_rate)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_encoder *encoder;
+ struct intel_dp *intel_dp = NULL;
+ struct intel_crtc_config *config = NULL;
+ struct intel_crtc *intel_crtc = NULL;
+ struct intel_connector *intel_connector = dev_priv->drrs.connector;
+ u32 reg, val;
+ enum edp_drrs_refresh_rate_type index = DRRS_HIGH_RR;
+
+ if (refresh_rate <= 0) {
+ DRM_DEBUG_KMS("Refresh rate should be positive non-zero.\n");
+ return;
+ }
+
+ if (intel_connector == NULL) {
+ DRM_DEBUG_KMS("DRRS supported for eDP only.\n");
+ return;
+ }
+
+ if (INTEL_INFO(dev)->gen < 8 && dev_priv->drrs.is_psr_enabled) {
+ DRM_DEBUG_KMS("DRRS is disabled as PSR is enabled\n");
+ return;
+ }
+
+ encoder = intel_attached_encoder(&intel_connector->base);
+ intel_dp = enc_to_intel_dp(&encoder->base);
+ intel_crtc = encoder->new_crtc;
+
+ if (!intel_crtc) {
+ DRM_DEBUG_KMS("DRRS: intel_crtc not initialized\n");
+ return;
+ }
+
+ config = &intel_crtc->config;
+
+ if (intel_dp->drrs_state.type < SEAMLESS_DRRS_SUPPORT) {
+ DRM_DEBUG_KMS("Only Seamless DRRS supported.\n");
+ return;
+ }
+
+ if (intel_connector->panel.downclock_mode->vrefresh == refresh_rate)
+ index = DRRS_LOW_RR;
+
+ if (index == intel_dp->drrs_state.refresh_rate_type) {
+ DRM_DEBUG_KMS(
+ "DRRS requested for previously set RR...ignoring\n");
+ return;
+ }
+
+ if (!intel_crtc->active) {
+ DRM_DEBUG_KMS("eDP encoder disabled. CRTC not Active\n");
+ return;
+ }
+
+ if (INTEL_INFO(dev)->gen > 6 && INTEL_INFO(dev)->gen < 8) {
+ reg = PIPECONF(intel_crtc->config.cpu_transcoder);
+ val = I915_READ(reg);
+ if (index > DRRS_HIGH_RR) {
+ val |= PIPECONF_EDP_RR_MODE_SWITCH;
+ intel_dp_set_m2_n2(intel_crtc, &config->dp_m2_n2);
+ } else {
+ val &= ~PIPECONF_EDP_RR_MODE_SWITCH;
+ }
+ I915_WRITE(reg, val);
+ }
+
+ /*
+ * mutex taken to ensure that there is no race between differnt
+ * drrs calls trying to update refresh rate. This scenario may occur
+ * in future when idleness detection based DRRS in kernel and
+ * possible calls from user space to set differnt RR are made.
+ */
+
+ mutex_lock(&intel_dp->drrs_state.mutex);
+
+ intel_dp->drrs_state.refresh_rate_type = index;
+
+ mutex_unlock(&intel_dp->drrs_state.mutex);
+
+ DRM_DEBUG_KMS("eDP Refresh Rate set to : %dHz\n", refresh_rate);
+}
+
static struct drm_display_mode *
intel_dp_drrs_init(struct intel_digital_port *intel_dig_port,
struct intel_connector *intel_connector,
@@ -3649,6 +3756,10 @@ intel_dp_drrs_init(struct intel_digital_port *intel_dig_port,
if (downclock_mode != NULL &&
dev_priv->vbt.drrs_type == SEAMLESS_DRRS_SUPPORT) {
+ dev_priv->drrs.connector = intel_connector;
+
+ mutex_init(&intel_dp->drrs_state.mutex);
+
intel_dp->drrs_state.type = dev_priv->vbt.drrs_type;
intel_dp->drrs_state.refresh_rate_type = DRRS_HIGH_RR;
@@ -305,6 +305,9 @@ struct intel_crtc_config {
int pipe_bpp;
struct intel_link_m_n dp_m_n;
+ /* m2_n2 for eDP downclock */
+ struct intel_link_m_n dp_m2_n2;
+
/*
* Frequence the dpll for the port should run at. Differs from the
* adjusted dotclock e.g. for DP or 12bpc hdmi mode. This is also
@@ -535,6 +538,7 @@ struct intel_dp {
struct {
enum drrs_support_type type;
enum edp_drrs_refresh_rate_type refresh_rate_type;
+ struct mutex mutex;
} drrs_state;
};
@@ -789,7 +793,7 @@ void intel_edp_panel_off(struct intel_dp *intel_dp);
void intel_edp_psr_enable(struct intel_dp *intel_dp);
void intel_edp_psr_disable(struct intel_dp *intel_dp);
void intel_edp_psr_update(struct drm_device *dev);
-
+void intel_dp_set_drrs_state(struct drm_device *dev, int refresh_rate);
/* intel_dsi.c */
bool intel_dsi_init(struct drm_device *dev);