diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index dfc7993..8e022cc 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -37,6 +37,7 @@ i915-y += intel_bios.o \
 	  intel_cursor.o \
 	  intel_display.o \
 	  intel_eld.o \
+	  intel_fdi.o \
 	  intel_modes.o \
 	  intel_overlay.o \
 	  intel_sideband.o \
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 0ad4e96..570e888 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -211,20 +211,7 @@ void intel_prepare_ddi(struct drm_device *dev)
 		intel_prepare_ddi_buffers(dev, port);
 }
 
-static const long hsw_ddi_buf_ctl_values[] = {
-	DDI_BUF_EMP_400MV_0DB_HSW,
-	DDI_BUF_EMP_400MV_3_5DB_HSW,
-	DDI_BUF_EMP_400MV_6DB_HSW,
-	DDI_BUF_EMP_400MV_9_5DB_HSW,
-	DDI_BUF_EMP_600MV_0DB_HSW,
-	DDI_BUF_EMP_600MV_3_5DB_HSW,
-	DDI_BUF_EMP_600MV_6DB_HSW,
-	DDI_BUF_EMP_800MV_0DB_HSW,
-	DDI_BUF_EMP_800MV_3_5DB_HSW
-};
-
-static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
-				    enum port port)
+void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv, enum port port)
 {
 	uint32_t reg = DDI_BUF_CTL(port);
 	int i;
@@ -237,133 +224,6 @@ static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
 	DRM_ERROR("Timeout waiting for DDI BUF %c idle bit\n", port_name(port));
 }
 
-/* Starting with Haswell, different DDI ports can work in FDI mode for
- * connection to the PCH-located connectors. For this, it is necessary to train
- * both the DDI port and PCH receiver for the desired DDI buffer settings.
- *
- * The recommended port to work in FDI mode is DDI E, which we use here. Also,
- * please note that when FDI mode is active on DDI E, it shares 2 lines with
- * DDI A (which is used for eDP)
- */
-
-void hsw_fdi_link_train(struct drm_crtc *crtc)
-{
-	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	u32 temp, i, rx_ctl_val;
-
-	/* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the
-	 * mode set "sequence for CRT port" document:
-	 * - TP1 to TP2 time with the default value
-	 * - FDI delay to 90h
-	 *
-	 * WaFDIAutoLinkSetTimingOverrride:hsw
-	 */
-	I915_WRITE(_FDI_RXA_MISC, FDI_RX_PWRDN_LANE1_VAL(2) |
-				  FDI_RX_PWRDN_LANE0_VAL(2) |
-				  FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
-
-	/* Enable the PCH Receiver FDI PLL */
-	rx_ctl_val = dev_priv->fdi_rx_config | FDI_RX_ENHANCE_FRAME_ENABLE |
-		     FDI_RX_PLL_ENABLE |
-		     FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
-	I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
-	POSTING_READ(_FDI_RXA_CTL);
-	udelay(220);
-
-	/* Switch from Rawclk to PCDclk */
-	rx_ctl_val |= FDI_PCDCLK;
-	I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
-
-	/* Configure Port Clock Select */
-	I915_WRITE(PORT_CLK_SEL(PORT_E), intel_crtc->ddi_pll_sel);
-
-	/* Start the training iterating through available voltages and emphasis,
-	 * testing each value twice. */
-	for (i = 0; i < ARRAY_SIZE(hsw_ddi_buf_ctl_values) * 2; i++) {
-		/* Configure DP_TP_CTL with auto-training */
-		I915_WRITE(DP_TP_CTL(PORT_E),
-					DP_TP_CTL_FDI_AUTOTRAIN |
-					DP_TP_CTL_ENHANCED_FRAME_ENABLE |
-					DP_TP_CTL_LINK_TRAIN_PAT1 |
-					DP_TP_CTL_ENABLE);
-
-		/* Configure and enable DDI_BUF_CTL for DDI E with next voltage.
-		 * DDI E does not support port reversal, the functionality is
-		 * achieved on the PCH side in FDI_RX_CTL, so no need to set the
-		 * port reversal bit */
-		I915_WRITE(DDI_BUF_CTL(PORT_E),
-			   DDI_BUF_CTL_ENABLE |
-			   ((intel_crtc->config.fdi_lanes - 1) << 1) |
-			   hsw_ddi_buf_ctl_values[i / 2]);
-		POSTING_READ(DDI_BUF_CTL(PORT_E));
-
-		udelay(600);
-
-		/* Program PCH FDI Receiver TU */
-		I915_WRITE(_FDI_RXA_TUSIZE1, TU_SIZE(64));
-
-		/* Enable PCH FDI Receiver with auto-training */
-		rx_ctl_val |= FDI_RX_ENABLE | FDI_LINK_TRAIN_AUTO;
-		I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
-		POSTING_READ(_FDI_RXA_CTL);
-
-		/* Wait for FDI receiver lane calibration */
-		udelay(30);
-
-		/* Unset FDI_RX_MISC pwrdn lanes */
-		temp = I915_READ(_FDI_RXA_MISC);
-		temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
-		I915_WRITE(_FDI_RXA_MISC, temp);
-		POSTING_READ(_FDI_RXA_MISC);
-
-		/* Wait for FDI auto training time */
-		udelay(5);
-
-		temp = I915_READ(DP_TP_STATUS(PORT_E));
-		if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) {
-			DRM_DEBUG_KMS("FDI link training done on step %d\n", i);
-
-			/* Enable normal pixel sending for FDI */
-			I915_WRITE(DP_TP_CTL(PORT_E),
-				   DP_TP_CTL_FDI_AUTOTRAIN |
-				   DP_TP_CTL_LINK_TRAIN_NORMAL |
-				   DP_TP_CTL_ENHANCED_FRAME_ENABLE |
-				   DP_TP_CTL_ENABLE);
-
-			return;
-		}
-
-		temp = I915_READ(DDI_BUF_CTL(PORT_E));
-		temp &= ~DDI_BUF_CTL_ENABLE;
-		I915_WRITE(DDI_BUF_CTL(PORT_E), temp);
-		POSTING_READ(DDI_BUF_CTL(PORT_E));
-
-		/* Disable DP_TP_CTL and FDI_RX_CTL and retry */
-		temp = I915_READ(DP_TP_CTL(PORT_E));
-		temp &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
-		temp |= DP_TP_CTL_LINK_TRAIN_PAT1;
-		I915_WRITE(DP_TP_CTL(PORT_E), temp);
-		POSTING_READ(DP_TP_CTL(PORT_E));
-
-		intel_wait_ddi_buf_idle(dev_priv, PORT_E);
-
-		rx_ctl_val &= ~FDI_RX_ENABLE;
-		I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
-		POSTING_READ(_FDI_RXA_CTL);
-
-		/* Reset FDI_RX_MISC pwrdn lanes */
-		temp = I915_READ(_FDI_RXA_MISC);
-		temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
-		temp |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2);
-		I915_WRITE(_FDI_RXA_MISC, temp);
-		POSTING_READ(_FDI_RXA_MISC);
-	}
-
-	DRM_ERROR("FDI link training failed!\n");
-}
-
 static void intel_ddi_mode_set(struct intel_encoder *encoder)
 {
 	struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d327735..e23ca4b 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -80,16 +80,6 @@ intel_pch_rawclk(struct drm_device *dev)
 	return I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK;
 }
 
-static inline u32 /* units of 100MHz */
-intel_fdi_link_freq(struct drm_device *dev)
-{
-	if (IS_GEN5(dev)) {
-		struct drm_i915_private *dev_priv = dev->dev_private;
-		return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2;
-	} else
-		return 27;
-}
-
 static const intel_limit_t intel_limits_i8xx_dac = {
 	.dot = { .min = 25000, .max = 350000 },
 	.vco = { .min = 908000, .max = 1512000 },
@@ -977,83 +967,6 @@ void assert_shared_dpll(struct drm_i915_private *dev_priv,
 	     pll->name, state_string(state), state_string(cur_state));
 }
 
-static void assert_fdi_tx(struct drm_i915_private *dev_priv,
-			  enum pipe pipe, bool state)
-{
-	int reg;
-	u32 val;
-	bool cur_state;
-	enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
-								      pipe);
-
-	if (HAS_DDI(dev_priv->dev)) {
-		/* DDI does not have a specific FDI_TX register */
-		reg = TRANS_DDI_FUNC_CTL(cpu_transcoder);
-		val = I915_READ(reg);
-		cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
-	} else {
-		reg = FDI_TX_CTL(pipe);
-		val = I915_READ(reg);
-		cur_state = !!(val & FDI_TX_ENABLE);
-	}
-	WARN(cur_state != state,
-	     "FDI TX state assertion failure (expected %s, current %s)\n",
-	     state_string(state), state_string(cur_state));
-}
-#define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
-#define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)
-
-static void assert_fdi_rx(struct drm_i915_private *dev_priv,
-			  enum pipe pipe, bool state)
-{
-	int reg;
-	u32 val;
-	bool cur_state;
-
-	reg = FDI_RX_CTL(pipe);
-	val = I915_READ(reg);
-	cur_state = !!(val & FDI_RX_ENABLE);
-	WARN(cur_state != state,
-	     "FDI RX state assertion failure (expected %s, current %s)\n",
-	     state_string(state), state_string(cur_state));
-}
-#define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
-#define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)
-
-static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
-				      enum pipe pipe)
-{
-	int reg;
-	u32 val;
-
-	/* ILK FDI PLL is always enabled */
-	if (INTEL_INFO(dev_priv->dev)->gen == 5)
-		return;
-
-	/* On Haswell, DDI ports are responsible for the FDI PLL setup */
-	if (HAS_DDI(dev_priv->dev))
-		return;
-
-	reg = FDI_TX_CTL(pipe);
-	val = I915_READ(reg);
-	WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
-}
-
-void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
-		       enum pipe pipe, bool state)
-{
-	int reg;
-	u32 val;
-	bool cur_state;
-
-	reg = FDI_RX_CTL(pipe);
-	val = I915_READ(reg);
-	cur_state = !!(val & FDI_RX_PLL_ENABLE);
-	WARN(cur_state != state,
-	     "FDI RX PLL assertion failure (expected %s, current %s)\n",
-	     state_string(state), state_string(cur_state));
-}
-
 static void assert_panel_unlocked(struct drm_i915_private *dev_priv,
 				  enum pipe pipe)
 {
@@ -1110,8 +1023,8 @@ void assert_pipe(struct drm_i915_private *dev_priv,
 	     pipe_name(pipe), state_string(state), state_string(cur_state));
 }
 
-static void assert_plane(struct drm_i915_private *dev_priv,
-			 enum plane plane, bool state)
+void assert_plane(struct drm_i915_private *dev_priv, enum plane plane,
+		  bool state)
 {
 	int reg;
 	u32 val;
@@ -2503,549 +2416,11 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 	return 0;
 }
 
-static void intel_fdi_normal_train(struct drm_crtc *crtc)
-{
-	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	int pipe = intel_crtc->pipe;
-	u32 reg, temp;
-
-	/* enable normal train */
-	reg = FDI_TX_CTL(pipe);
-	temp = I915_READ(reg);
-	if (IS_IVYBRIDGE(dev)) {
-		temp &= ~FDI_LINK_TRAIN_NONE_IVB;
-		temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
-	} else {
-		temp &= ~FDI_LINK_TRAIN_NONE;
-		temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
-	}
-	I915_WRITE(reg, temp);
-
-	reg = FDI_RX_CTL(pipe);
-	temp = I915_READ(reg);
-	if (HAS_PCH_CPT(dev)) {
-		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
-		temp |= FDI_LINK_TRAIN_NORMAL_CPT;
-	} else {
-		temp &= ~FDI_LINK_TRAIN_NONE;
-		temp |= FDI_LINK_TRAIN_NONE;
-	}
-	I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
-
-	/* wait one idle pattern time */
-	POSTING_READ(reg);
-	udelay(1000);
-
-	/* IVB wants error correction enabled */
-	if (IS_IVYBRIDGE(dev))
-		I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
-			   FDI_FE_ERRC_ENABLE);
-}
-
-static bool pipe_has_enabled_pch(struct intel_crtc *crtc)
-{
-	return crtc->base.enabled && crtc->active &&
-		crtc->config.has_pch_encoder;
-}
-
 static void ivb_modeset_global_resources(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *pipe_B_crtc =
-		to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
-	struct intel_crtc *pipe_C_crtc =
-		to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_C]);
-	uint32_t temp;
-
-	/*
-	 * When everything is off disable fdi C so that we could enable fdi B
-	 * with all lanes. Note that we don't care about enabled pipes without
-	 * an enabled pch encoder.
-	 */
-	if (!pipe_has_enabled_pch(pipe_B_crtc) &&
-	    !pipe_has_enabled_pch(pipe_C_crtc)) {
-		WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
-		WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
-
-		temp = I915_READ(SOUTH_CHICKEN1);
-		temp &= ~FDI_BC_BIFURCATION_SELECT;
-		DRM_DEBUG_KMS("disabling fdi C rx\n");
-		I915_WRITE(SOUTH_CHICKEN1, temp);
-	}
-}
-
-/* The FDI link training functions for ILK/Ibexpeak. */
-static void ironlake_fdi_link_train(struct drm_crtc *crtc)
-{
-	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	int pipe = intel_crtc->pipe;
-	int plane = intel_crtc->plane;
-	u32 reg, temp, tries;
-
-	/* FDI needs bits from pipe & plane first */
-	assert_pipe_enabled(dev_priv, pipe);
-	assert_plane_enabled(dev_priv, plane);
-
-	/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
-	   for train result */
-	reg = FDI_RX_IMR(pipe);
-	temp = I915_READ(reg);
-	temp &= ~FDI_RX_SYMBOL_LOCK;
-	temp &= ~FDI_RX_BIT_LOCK;
-	I915_WRITE(reg, temp);
-	I915_READ(reg);
-	udelay(150);
-
-	/* enable CPU FDI TX and PCH FDI RX */
-	reg = FDI_TX_CTL(pipe);
-	temp = I915_READ(reg);
-	temp &= ~FDI_DP_PORT_WIDTH_MASK;
-	temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
-	temp &= ~FDI_LINK_TRAIN_NONE;
-	temp |= FDI_LINK_TRAIN_PATTERN_1;
-	I915_WRITE(reg, temp | FDI_TX_ENABLE);
-
-	reg = FDI_RX_CTL(pipe);
-	temp = I915_READ(reg);
-	temp &= ~FDI_LINK_TRAIN_NONE;
-	temp |= FDI_LINK_TRAIN_PATTERN_1;
-	I915_WRITE(reg, temp | FDI_RX_ENABLE);
-
-	POSTING_READ(reg);
-	udelay(150);
-
-	/* Ironlake workaround, enable clock pointer after FDI enable*/
-	I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
-	I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
-		   FDI_RX_PHASE_SYNC_POINTER_EN);
-
-	reg = FDI_RX_IIR(pipe);
-	for (tries = 0; tries < 5; tries++) {
-		temp = I915_READ(reg);
-		DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
-
-		if ((temp & FDI_RX_BIT_LOCK)) {
-			DRM_DEBUG_KMS("FDI train 1 done.\n");
-			I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
-			break;
-		}
-	}
-	if (tries == 5)
-		DRM_ERROR("FDI train 1 fail!\n");
-
-	/* Train 2 */
-	reg = FDI_TX_CTL(pipe);
-	temp = I915_READ(reg);
-	temp &= ~FDI_LINK_TRAIN_NONE;
-	temp |= FDI_LINK_TRAIN_PATTERN_2;
-	I915_WRITE(reg, temp);
-
-	reg = FDI_RX_CTL(pipe);
-	temp = I915_READ(reg);
-	temp &= ~FDI_LINK_TRAIN_NONE;
-	temp |= FDI_LINK_TRAIN_PATTERN_2;
-	I915_WRITE(reg, temp);
-
-	POSTING_READ(reg);
-	udelay(150);
-
-	reg = FDI_RX_IIR(pipe);
-	for (tries = 0; tries < 5; tries++) {
-		temp = I915_READ(reg);
-		DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
-
-		if (temp & FDI_RX_SYMBOL_LOCK) {
-			I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
-			DRM_DEBUG_KMS("FDI train 2 done.\n");
-			break;
-		}
-	}
-	if (tries == 5)
-		DRM_ERROR("FDI train 2 fail!\n");
-
-	DRM_DEBUG_KMS("FDI train done\n");
-
-}
-
-static const int snb_b_fdi_train_param[] = {
-	FDI_LINK_TRAIN_400MV_0DB_SNB_B,
-	FDI_LINK_TRAIN_400MV_6DB_SNB_B,
-	FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
-	FDI_LINK_TRAIN_800MV_0DB_SNB_B,
-};
-
-/* The FDI link training functions for SNB/Cougarpoint. */
-static void gen6_fdi_link_train(struct drm_crtc *crtc)
-{
-	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	int pipe = intel_crtc->pipe;
-	u32 reg, temp, i, retry;
-
-	/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
-	   for train result */
-	reg = FDI_RX_IMR(pipe);
-	temp = I915_READ(reg);
-	temp &= ~FDI_RX_SYMBOL_LOCK;
-	temp &= ~FDI_RX_BIT_LOCK;
-	I915_WRITE(reg, temp);
-
-	POSTING_READ(reg);
-	udelay(150);
-
-	/* enable CPU FDI TX and PCH FDI RX */
-	reg = FDI_TX_CTL(pipe);
-	temp = I915_READ(reg);
-	temp &= ~FDI_DP_PORT_WIDTH_MASK;
-	temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
-	temp &= ~FDI_LINK_TRAIN_NONE;
-	temp |= FDI_LINK_TRAIN_PATTERN_1;
-	temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
-	/* SNB-B */
-	temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
-	I915_WRITE(reg, temp | FDI_TX_ENABLE);
-
-	I915_WRITE(FDI_RX_MISC(pipe),
-		   FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
-
-	reg = FDI_RX_CTL(pipe);
-	temp = I915_READ(reg);
-	if (HAS_PCH_CPT(dev)) {
-		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
-		temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
-	} else {
-		temp &= ~FDI_LINK_TRAIN_NONE;
-		temp |= FDI_LINK_TRAIN_PATTERN_1;
-	}
-	I915_WRITE(reg, temp | FDI_RX_ENABLE);
-
-	POSTING_READ(reg);
-	udelay(150);
-
-	for (i = 0; i < 4; i++) {
-		reg = FDI_TX_CTL(pipe);
-		temp = I915_READ(reg);
-		temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
-		temp |= snb_b_fdi_train_param[i];
-		I915_WRITE(reg, temp);
-
-		POSTING_READ(reg);
-		udelay(500);
-
-		for (retry = 0; retry < 5; retry++) {
-			reg = FDI_RX_IIR(pipe);
-			temp = I915_READ(reg);
-			DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
-			if (temp & FDI_RX_BIT_LOCK) {
-				I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
-				DRM_DEBUG_KMS("FDI train 1 done.\n");
-				break;
-			}
-			udelay(50);
-		}
-		if (retry < 5)
-			break;
-	}
-	if (i == 4)
-		DRM_ERROR("FDI train 1 fail!\n");
-
-	/* Train 2 */
-	reg = FDI_TX_CTL(pipe);
-	temp = I915_READ(reg);
-	temp &= ~FDI_LINK_TRAIN_NONE;
-	temp |= FDI_LINK_TRAIN_PATTERN_2;
-	if (IS_GEN6(dev)) {
-		temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
-		/* SNB-B */
-		temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
-	}
-	I915_WRITE(reg, temp);
-
-	reg = FDI_RX_CTL(pipe);
-	temp = I915_READ(reg);
-	if (HAS_PCH_CPT(dev)) {
-		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
-		temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
-	} else {
-		temp &= ~FDI_LINK_TRAIN_NONE;
-		temp |= FDI_LINK_TRAIN_PATTERN_2;
-	}
-	I915_WRITE(reg, temp);
-
-	POSTING_READ(reg);
-	udelay(150);
-
-	for (i = 0; i < 4; i++) {
-		reg = FDI_TX_CTL(pipe);
-		temp = I915_READ(reg);
-		temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
-		temp |= snb_b_fdi_train_param[i];
-		I915_WRITE(reg, temp);
-
-		POSTING_READ(reg);
-		udelay(500);
-
-		for (retry = 0; retry < 5; retry++) {
-			reg = FDI_RX_IIR(pipe);
-			temp = I915_READ(reg);
-			DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
-			if (temp & FDI_RX_SYMBOL_LOCK) {
-				I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
-				DRM_DEBUG_KMS("FDI train 2 done.\n");
-				break;
-			}
-			udelay(50);
-		}
-		if (retry < 5)
-			break;
-	}
-	if (i == 4)
-		DRM_ERROR("FDI train 2 fail!\n");
-
-	DRM_DEBUG_KMS("FDI train done.\n");
-}
-
-/* Manual link training for Ivy Bridge A0 parts */
-static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
-{
-	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	int pipe = intel_crtc->pipe;
-	u32 reg, temp, i, j;
-
-	/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
-	   for train result */
-	reg = FDI_RX_IMR(pipe);
-	temp = I915_READ(reg);
-	temp &= ~FDI_RX_SYMBOL_LOCK;
-	temp &= ~FDI_RX_BIT_LOCK;
-	I915_WRITE(reg, temp);
-
-	POSTING_READ(reg);
-	udelay(150);
-
-	DRM_DEBUG_KMS("FDI_RX_IIR before link train 0x%x\n",
-		      I915_READ(FDI_RX_IIR(pipe)));
-
-	/* Try each vswing and preemphasis setting twice before moving on */
-	for (j = 0; j < ARRAY_SIZE(snb_b_fdi_train_param) * 2; j++) {
-		/* disable first in case we need to retry */
-		reg = FDI_TX_CTL(pipe);
-		temp = I915_READ(reg);
-		temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
-		temp &= ~FDI_TX_ENABLE;
-		I915_WRITE(reg, temp);
-
-		reg = FDI_RX_CTL(pipe);
-		temp = I915_READ(reg);
-		temp &= ~FDI_LINK_TRAIN_AUTO;
-		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
-		temp &= ~FDI_RX_ENABLE;
-		I915_WRITE(reg, temp);
-
-		/* enable CPU FDI TX and PCH FDI RX */
-		reg = FDI_TX_CTL(pipe);
-		temp = I915_READ(reg);
-		temp &= ~FDI_DP_PORT_WIDTH_MASK;
-		temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
-		temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
-		temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
-		temp |= snb_b_fdi_train_param[j/2];
-		temp |= FDI_COMPOSITE_SYNC;
-		I915_WRITE(reg, temp | FDI_TX_ENABLE);
-
-		I915_WRITE(FDI_RX_MISC(pipe),
-			   FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
-
-		reg = FDI_RX_CTL(pipe);
-		temp = I915_READ(reg);
-		temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
-		temp |= FDI_COMPOSITE_SYNC;
-		I915_WRITE(reg, temp | FDI_RX_ENABLE);
-
-		POSTING_READ(reg);
-		udelay(1); /* should be 0.5us */
-
-		for (i = 0; i < 4; i++) {
-			reg = FDI_RX_IIR(pipe);
-			temp = I915_READ(reg);
-			DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
-
-			if (temp & FDI_RX_BIT_LOCK ||
-			    (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
-				I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
-				DRM_DEBUG_KMS("FDI train 1 done, level %i.\n",
-					      i);
-				break;
-			}
-			udelay(1); /* should be 0.5us */
-		}
-		if (i == 4) {
-			DRM_DEBUG_KMS("FDI train 1 fail on vswing %d\n", j / 2);
-			continue;
-		}
-
-		/* Train 2 */
-		reg = FDI_TX_CTL(pipe);
-		temp = I915_READ(reg);
-		temp &= ~FDI_LINK_TRAIN_NONE_IVB;
-		temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
-		I915_WRITE(reg, temp);
-
-		reg = FDI_RX_CTL(pipe);
-		temp = I915_READ(reg);
-		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
-		temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
-		I915_WRITE(reg, temp);
-
-		POSTING_READ(reg);
-		udelay(2); /* should be 1.5us */
-
-		for (i = 0; i < 4; i++) {
-			reg = FDI_RX_IIR(pipe);
-			temp = I915_READ(reg);
-			DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
-
-			if (temp & FDI_RX_SYMBOL_LOCK ||
-			    (I915_READ(reg) & FDI_RX_SYMBOL_LOCK)) {
-				I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
-				DRM_DEBUG_KMS("FDI train 2 done, level %i.\n",
-					      i);
-				goto train_done;
-			}
-			udelay(2); /* should be 1.5us */
-		}
-		if (i == 4)
-			DRM_DEBUG_KMS("FDI train 2 fail on vswing %d\n", j / 2);
-	}
-
-train_done:
-	DRM_DEBUG_KMS("FDI train done.\n");
-}
-
-static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc)
-{
-	struct drm_device *dev = intel_crtc->base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	int pipe = intel_crtc->pipe;
-	u32 reg, temp;
-
-
-	/* enable PCH FDI RX PLL, wait warmup plus DMI latency */
-	reg = FDI_RX_CTL(pipe);
-	temp = I915_READ(reg);
-	temp &= ~(FDI_DP_PORT_WIDTH_MASK | (0x7 << 16));
-	temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
-	temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
-	I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
-
-	POSTING_READ(reg);
-	udelay(200);
-
-	/* Switch from Rawclk to PCDclk */
-	temp = I915_READ(reg);
-	I915_WRITE(reg, temp | FDI_PCDCLK);
-
-	POSTING_READ(reg);
-	udelay(200);
-
-	/* Enable CPU FDI TX PLL, always on for Ironlake */
-	reg = FDI_TX_CTL(pipe);
-	temp = I915_READ(reg);
-	if ((temp & FDI_TX_PLL_ENABLE) == 0) {
-		I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
-
-		POSTING_READ(reg);
-		udelay(100);
-	}
-}
-
-static void ironlake_fdi_pll_disable(struct intel_crtc *intel_crtc)
-{
-	struct drm_device *dev = intel_crtc->base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	int pipe = intel_crtc->pipe;
-	u32 reg, temp;
-
-	/* Switch from PCDclk to Rawclk */
-	reg = FDI_RX_CTL(pipe);
-	temp = I915_READ(reg);
-	I915_WRITE(reg, temp & ~FDI_PCDCLK);
-
-	/* Disable CPU FDI TX PLL */
-	reg = FDI_TX_CTL(pipe);
-	temp = I915_READ(reg);
-	I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);
-
-	POSTING_READ(reg);
-	udelay(100);
-
-	reg = FDI_RX_CTL(pipe);
-	temp = I915_READ(reg);
-	I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);
 
-	/* Wait for the clocks to turn off. */
-	POSTING_READ(reg);
-	udelay(100);
-}
-
-static void ironlake_fdi_disable(struct drm_crtc *crtc)
-{
-	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	int pipe = intel_crtc->pipe;
-	u32 reg, temp;
-
-	/* disable CPU FDI tx and PCH FDI rx */
-	reg = FDI_TX_CTL(pipe);
-	temp = I915_READ(reg);
-	I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
-	POSTING_READ(reg);
-
-	reg = FDI_RX_CTL(pipe);
-	temp = I915_READ(reg);
-	temp &= ~(0x7 << 16);
-	temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
-	I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
-
-	POSTING_READ(reg);
-	udelay(100);
-
-	/* Ironlake workaround, disable clock pointer after downing FDI */
-	if (HAS_PCH_IBX(dev)) {
-		I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
-	}
-
-	/* still set train pattern 1 */
-	reg = FDI_TX_CTL(pipe);
-	temp = I915_READ(reg);
-	temp &= ~FDI_LINK_TRAIN_NONE;
-	temp |= FDI_LINK_TRAIN_PATTERN_1;
-	I915_WRITE(reg, temp);
-
-	reg = FDI_RX_CTL(pipe);
-	temp = I915_READ(reg);
-	if (HAS_PCH_CPT(dev)) {
-		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
-		temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
-	} else {
-		temp &= ~FDI_LINK_TRAIN_NONE;
-		temp |= FDI_LINK_TRAIN_PATTERN_1;
-	}
-	/* BPC in FDI rx is consistent with that in PIPECONF */
-	temp &= ~(0x07 << 16);
-	temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
-	I915_WRITE(reg, temp);
-
-	POSTING_READ(reg);
-	udelay(100);
+	ivb_update_fdi_bc_resources(dev_priv);
 }
 
 bool intel_has_pending_fb_unpin(struct drm_device *dev)
@@ -3203,48 +2578,6 @@ static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc,
 		   I915_READ(VSYNCSHIFT(cpu_transcoder)));
 }
 
-static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	uint32_t temp;
-
-	temp = I915_READ(SOUTH_CHICKEN1);
-	if (temp & FDI_BC_BIFURCATION_SELECT)
-		return;
-
-	WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
-	WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
-
-	temp |= FDI_BC_BIFURCATION_SELECT;
-	DRM_DEBUG_KMS("enabling fdi C rx\n");
-	I915_WRITE(SOUTH_CHICKEN1, temp);
-	POSTING_READ(SOUTH_CHICKEN1);
-}
-
-static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
-{
-	struct drm_device *dev = intel_crtc->base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
-	switch (intel_crtc->pipe) {
-	case PIPE_A:
-		break;
-	case PIPE_B:
-		if (intel_crtc->config.fdi_lanes > 2)
-			WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT);
-		else
-			cpt_enable_fdi_bc_bifurcation(dev);
-
-		break;
-	case PIPE_C:
-		cpt_enable_fdi_bc_bifurcation(dev);
-
-		break;
-	default:
-		BUG();
-	}
-}
-
 /*
  * Enable PCH resources required for PCH ports:
  *   - PCH PLLs
@@ -4650,111 +3983,6 @@ bool intel_connector_get_hw_state(struct intel_connector *connector)
 	return encoder->get_hw_state(encoder, &pipe);
 }
 
-static bool ironlake_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
-				     struct intel_crtc_config *pipe_config)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *pipe_B_crtc =
-		to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
-
-	DRM_DEBUG_KMS("checking fdi config on pipe %c, lanes %i\n",
-		      pipe_name(pipe), pipe_config->fdi_lanes);
-	if (pipe_config->fdi_lanes > 4) {
-		DRM_DEBUG_KMS("invalid fdi lane config on pipe %c: %i lanes\n",
-			      pipe_name(pipe), pipe_config->fdi_lanes);
-		return false;
-	}
-
-	if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
-		if (pipe_config->fdi_lanes > 2) {
-			DRM_DEBUG_KMS("only 2 lanes on haswell, required: %i lanes\n",
-				      pipe_config->fdi_lanes);
-			return false;
-		} else {
-			return true;
-		}
-	}
-
-	if (INTEL_INFO(dev)->num_pipes == 2)
-		return true;
-
-	/* Ivybridge 3 pipe is really complicated */
-	switch (pipe) {
-	case PIPE_A:
-		return true;
-	case PIPE_B:
-		if (dev_priv->pipe_to_crtc_mapping[PIPE_C]->enabled &&
-		    pipe_config->fdi_lanes > 2) {
-			DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
-				      pipe_name(pipe), pipe_config->fdi_lanes);
-			return false;
-		}
-		return true;
-	case PIPE_C:
-		if (!pipe_has_enabled_pch(pipe_B_crtc) ||
-		    pipe_B_crtc->config.fdi_lanes <= 2) {
-			if (pipe_config->fdi_lanes > 2) {
-				DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
-					      pipe_name(pipe), pipe_config->fdi_lanes);
-				return false;
-			}
-		} else {
-			DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n");
-			return false;
-		}
-		return true;
-	default:
-		BUG();
-	}
-}
-
-#define RETRY 1
-static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc,
-				       struct intel_crtc_config *pipe_config)
-{
-	struct drm_device *dev = intel_crtc->base.dev;
-	struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
-	int lane, link_bw, fdi_dotclock;
-	bool setup_ok, needs_recompute = false;
-
-retry:
-	/* FDI is a binary signal running at ~2.7GHz, encoding
-	 * each output octet as 10 bits. The actual frequency
-	 * is stored as a divider into a 100MHz clock, and the
-	 * mode pixel clock is stored in units of 1KHz.
-	 * Hence the bw of each lane in terms of the mode signal
-	 * is:
-	 */
-	link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
-
-	fdi_dotclock = adjusted_mode->crtc_clock;
-
-	lane = ironlake_get_lanes_required(fdi_dotclock, link_bw,
-					   pipe_config->pipe_bpp);
-
-	pipe_config->fdi_lanes = lane;
-
-	intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock,
-			       link_bw, &pipe_config->fdi_m_n);
-
-	setup_ok = ironlake_check_fdi_lanes(intel_crtc->base.dev,
-					    intel_crtc->pipe, pipe_config);
-	if (!setup_ok && pipe_config->pipe_bpp > 6*3) {
-		pipe_config->pipe_bpp -= 2*3;
-		DRM_DEBUG_KMS("fdi link bw constraint, reducing pipe bpp to %i\n",
-			      pipe_config->pipe_bpp);
-		needs_recompute = true;
-		pipe_config->bw_constrained = true;
-
-		goto retry;
-	}
-
-	if (needs_recompute)
-		return RETRY;
-
-	return setup_ok ? 0 : -EINVAL;
-}
-
 static void hsw_compute_ips_config(struct intel_crtc *crtc,
 				   struct intel_crtc_config *pipe_config)
 {
@@ -8710,7 +7938,7 @@ encoder_retry:
 		goto fail;
 	}
 
-	if (ret == RETRY) {
+	if (ret == FDI_COMPUTE_CONFIG_RETRY) {
 		if (WARN(!retry, "loop in pipe configuration computation\n")) {
 			ret = -EINVAL;
 			goto fail;
@@ -10410,27 +9638,21 @@ static void intel_init_display(struct drm_device *dev)
 			i830_get_display_clock_speed;
 
 	if (HAS_PCH_SPLIT(dev)) {
-		if (IS_GEN5(dev)) {
-			dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
-		} else if (IS_GEN6(dev)) {
-			dev_priv->display.fdi_link_train = gen6_fdi_link_train;
+		if (IS_GEN6(dev))
 			dev_priv->display.modeset_global_resources =
 				snb_modeset_global_resources;
-		} else if (IS_IVYBRIDGE(dev)) {
-			/* FIXME: detect B0+ stepping and use auto training */
-			dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
+		else if (IS_IVYBRIDGE(dev))
 			dev_priv->display.modeset_global_resources =
 				ivb_modeset_global_resources;
-		} else if (IS_HASWELL(dev) || IS_GEN8(dev)) {
-			dev_priv->display.fdi_link_train = hsw_fdi_link_train;
+		else if (IS_HASWELL(dev) || IS_GEN8(dev))
 			dev_priv->display.modeset_global_resources =
 				haswell_modeset_global_resources;
-		}
 	} else if (IS_VALLEYVIEW(dev)) {
 		dev_priv->display.modeset_global_resources =
 			valleyview_modeset_global_resources;
 	}
 
+	intel_fdi_init(dev_priv);
 	intel_eld_init(dev_priv);
 
 	/* Default just returns -ENODEV to indicate unsupported */
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 914dcbc..013ddf5 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -657,7 +657,6 @@ int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y);
 
 /* intel_ddi.c */
 void intel_prepare_ddi(struct drm_device *dev);
-void hsw_fdi_link_train(struct drm_crtc *crtc);
 void intel_ddi_init(struct drm_device *dev, enum port port);
 enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder);
 bool intel_ddi_get_hw_state(struct intel_encoder *encoder, enum pipe *pipe);
@@ -678,6 +677,7 @@ bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector);
 void intel_ddi_fdi_disable(struct drm_crtc *crtc);
 void intel_ddi_get_config(struct intel_encoder *encoder,
 			  struct intel_crtc_config *pipe_config);
+void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv, enum port port);
 
 
 /* intel_display.c */
@@ -738,13 +738,13 @@ void assert_pll(struct drm_i915_private *dev_priv,
 		enum pipe pipe, bool state);
 #define assert_pll_enabled(d, p) assert_pll(d, p, true)
 #define assert_pll_disabled(d, p) assert_pll(d, p, false)
-void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
-		       enum pipe pipe, bool state);
-#define assert_fdi_rx_pll_enabled(d, p) assert_fdi_rx_pll(d, p, true)
-#define assert_fdi_rx_pll_disabled(d, p) assert_fdi_rx_pll(d, p, false)
 void assert_pipe(struct drm_i915_private *dev_priv, enum pipe pipe, bool state);
 #define assert_pipe_enabled(d, p) assert_pipe(d, p, true)
 #define assert_pipe_disabled(d, p) assert_pipe(d, p, false)
+void assert_plane(struct drm_i915_private *dev_priv, enum plane plane,
+		  bool state);
+#define assert_plane_enabled(d, p) assert_plane(d, p, true)
+#define assert_plane_disabled(d, p) assert_plane(d, p, false)
 unsigned long intel_gen4_compute_page_offset(int *x, int *y,
 					     unsigned int tiling_mode,
 					     unsigned int bpp,
@@ -840,6 +840,35 @@ static inline void intel_fbdev_restore_mode(struct drm_device *dev)
 }
 #endif
 
+
+/* intel_fdi.c */
+u32 intel_fdi_link_freq(struct drm_device *dev);
+void assert_fdi_tx(struct drm_i915_private *dev_priv, enum pipe pipe,
+		   bool state);
+#define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
+#define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)
+void assert_fdi_rx(struct drm_i915_private *dev_priv, enum pipe pipe,
+		   bool state);
+#define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
+#define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)
+void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
+		       enum pipe pipe, bool state);
+#define assert_fdi_rx_pll_enabled(d, p) assert_fdi_rx_pll(d, p, true)
+#define assert_fdi_rx_pll_disabled(d, p) assert_fdi_rx_pll(d, p, false)
+void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc);
+void intel_fdi_normal_train(struct drm_crtc *crtc);
+void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
+			       enum pipe pipe);
+void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc);
+void ironlake_fdi_pll_disable(struct intel_crtc *intel_crtc);
+void ironlake_fdi_disable(struct drm_crtc *crtc);
+void intel_fdi_init(struct drm_i915_private *dev_priv);
+#define FDI_COMPUTE_CONFIG_RETRY 1
+int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc,
+				struct intel_crtc_config *pipe_config);
+void ivb_update_fdi_bc_resources(struct drm_i915_private *dev_priv);
+
+
 /* intel_hdmi.c */
 void intel_hdmi_init(struct drm_device *dev, int hdmi_reg, enum port port);
 void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
diff --git a/drivers/gpu/drm/i915/intel_fdi.c b/drivers/gpu/drm/i915/intel_fdi.c
new file mode 100644
index 0000000..9023369
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_fdi.c
@@ -0,0 +1,959 @@
+/*
+ * Copyright © 2006-2007, 2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+
+#include "intel_drv.h"
+
+u32 /* units of 100MHz */
+intel_fdi_link_freq(struct drm_device *dev)
+{
+	if (IS_GEN5(dev)) {
+		struct drm_i915_private *dev_priv = dev->dev_private;
+		return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2;
+	} else
+		return 27;
+}
+
+void assert_fdi_tx(struct drm_i915_private *dev_priv, enum pipe pipe,
+		   bool state)
+{
+	int reg;
+	u32 val;
+	bool cur_state;
+	enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
+								      pipe);
+
+	if (HAS_DDI(dev_priv->dev)) {
+		/* DDI does not have a specific FDI_TX register */
+		reg = TRANS_DDI_FUNC_CTL(cpu_transcoder);
+		val = I915_READ(reg);
+		cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
+	} else {
+		reg = FDI_TX_CTL(pipe);
+		val = I915_READ(reg);
+		cur_state = !!(val & FDI_TX_ENABLE);
+	}
+	WARN(cur_state != state,
+	     "FDI TX state assertion failure (expected %s, current %s)\n",
+	     state_string(state), state_string(cur_state));
+}
+
+void assert_fdi_rx(struct drm_i915_private *dev_priv, enum pipe pipe,
+		   bool state)
+{
+	int reg;
+	u32 val;
+	bool cur_state;
+
+	reg = FDI_RX_CTL(pipe);
+	val = I915_READ(reg);
+	cur_state = !!(val & FDI_RX_ENABLE);
+	WARN(cur_state != state,
+	     "FDI RX state assertion failure (expected %s, current %s)\n",
+	     state_string(state), state_string(cur_state));
+}
+
+void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
+			       enum pipe pipe)
+{
+	int reg;
+	u32 val;
+
+	/* ILK FDI PLL is always enabled */
+	if (INTEL_INFO(dev_priv->dev)->gen == 5)
+		return;
+
+	/* On Haswell, DDI ports are responsible for the FDI PLL setup */
+	if (HAS_DDI(dev_priv->dev))
+		return;
+
+	reg = FDI_TX_CTL(pipe);
+	val = I915_READ(reg);
+	WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
+}
+
+void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
+		       enum pipe pipe, bool state)
+{
+	int reg;
+	u32 val;
+	bool cur_state;
+
+	reg = FDI_RX_CTL(pipe);
+	val = I915_READ(reg);
+	cur_state = !!(val & FDI_RX_PLL_ENABLE);
+	WARN(cur_state != state,
+	     "FDI RX PLL assertion failure (expected %s, current %s)\n",
+	     state_string(state), state_string(cur_state));
+}
+
+
+/* The FDI link training functions for ILK/Ibexpeak. */
+static void ironlake_fdi_link_train(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int plane = intel_crtc->plane;
+	u32 reg, temp, tries;
+
+	/* FDI needs bits from pipe & plane first */
+	assert_pipe_enabled(dev_priv, pipe);
+	assert_plane_enabled(dev_priv, plane);
+
+	/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
+	   for train result */
+	reg = FDI_RX_IMR(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_RX_SYMBOL_LOCK;
+	temp &= ~FDI_RX_BIT_LOCK;
+	I915_WRITE(reg, temp);
+	I915_READ(reg);
+	udelay(150);
+
+	/* enable CPU FDI TX and PCH FDI RX */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_DP_PORT_WIDTH_MASK;
+	temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
+	temp &= ~FDI_LINK_TRAIN_NONE;
+	temp |= FDI_LINK_TRAIN_PATTERN_1;
+	I915_WRITE(reg, temp | FDI_TX_ENABLE);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_LINK_TRAIN_NONE;
+	temp |= FDI_LINK_TRAIN_PATTERN_1;
+	I915_WRITE(reg, temp | FDI_RX_ENABLE);
+
+	POSTING_READ(reg);
+	udelay(150);
+
+	/* Ironlake workaround, enable clock pointer after FDI enable*/
+	I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
+	I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
+		   FDI_RX_PHASE_SYNC_POINTER_EN);
+
+	reg = FDI_RX_IIR(pipe);
+	for (tries = 0; tries < 5; tries++) {
+		temp = I915_READ(reg);
+		DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+
+		if ((temp & FDI_RX_BIT_LOCK)) {
+			DRM_DEBUG_KMS("FDI train 1 done.\n");
+			I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
+			break;
+		}
+	}
+	if (tries == 5)
+		DRM_ERROR("FDI train 1 fail!\n");
+
+	/* Train 2 */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_LINK_TRAIN_NONE;
+	temp |= FDI_LINK_TRAIN_PATTERN_2;
+	I915_WRITE(reg, temp);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_LINK_TRAIN_NONE;
+	temp |= FDI_LINK_TRAIN_PATTERN_2;
+	I915_WRITE(reg, temp);
+
+	POSTING_READ(reg);
+	udelay(150);
+
+	reg = FDI_RX_IIR(pipe);
+	for (tries = 0; tries < 5; tries++) {
+		temp = I915_READ(reg);
+		DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+
+		if (temp & FDI_RX_SYMBOL_LOCK) {
+			I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
+			DRM_DEBUG_KMS("FDI train 2 done.\n");
+			break;
+		}
+	}
+	if (tries == 5)
+		DRM_ERROR("FDI train 2 fail!\n");
+
+	DRM_DEBUG_KMS("FDI train done\n");
+
+}
+
+static const int snb_b_fdi_train_param[] = {
+	FDI_LINK_TRAIN_400MV_0DB_SNB_B,
+	FDI_LINK_TRAIN_400MV_6DB_SNB_B,
+	FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
+	FDI_LINK_TRAIN_800MV_0DB_SNB_B,
+};
+
+/* The FDI link training functions for SNB/Cougarpoint. */
+static void gen6_fdi_link_train(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	u32 reg, temp, i, retry;
+
+	/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
+	   for train result */
+	reg = FDI_RX_IMR(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_RX_SYMBOL_LOCK;
+	temp &= ~FDI_RX_BIT_LOCK;
+	I915_WRITE(reg, temp);
+
+	POSTING_READ(reg);
+	udelay(150);
+
+	/* enable CPU FDI TX and PCH FDI RX */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_DP_PORT_WIDTH_MASK;
+	temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
+	temp &= ~FDI_LINK_TRAIN_NONE;
+	temp |= FDI_LINK_TRAIN_PATTERN_1;
+	temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+	/* SNB-B */
+	temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
+	I915_WRITE(reg, temp | FDI_TX_ENABLE);
+
+	I915_WRITE(FDI_RX_MISC(pipe),
+		   FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	if (HAS_PCH_CPT(dev)) {
+		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+		temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+	} else {
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_PATTERN_1;
+	}
+	I915_WRITE(reg, temp | FDI_RX_ENABLE);
+
+	POSTING_READ(reg);
+	udelay(150);
+
+	for (i = 0; i < 4; i++) {
+		reg = FDI_TX_CTL(pipe);
+		temp = I915_READ(reg);
+		temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+		temp |= snb_b_fdi_train_param[i];
+		I915_WRITE(reg, temp);
+
+		POSTING_READ(reg);
+		udelay(500);
+
+		for (retry = 0; retry < 5; retry++) {
+			reg = FDI_RX_IIR(pipe);
+			temp = I915_READ(reg);
+			DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+			if (temp & FDI_RX_BIT_LOCK) {
+				I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
+				DRM_DEBUG_KMS("FDI train 1 done.\n");
+				break;
+			}
+			udelay(50);
+		}
+		if (retry < 5)
+			break;
+	}
+	if (i == 4)
+		DRM_ERROR("FDI train 1 fail!\n");
+
+	/* Train 2 */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_LINK_TRAIN_NONE;
+	temp |= FDI_LINK_TRAIN_PATTERN_2;
+	if (IS_GEN6(dev)) {
+		temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+		/* SNB-B */
+		temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
+	}
+	I915_WRITE(reg, temp);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	if (HAS_PCH_CPT(dev)) {
+		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+		temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
+	} else {
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_PATTERN_2;
+	}
+	I915_WRITE(reg, temp);
+
+	POSTING_READ(reg);
+	udelay(150);
+
+	for (i = 0; i < 4; i++) {
+		reg = FDI_TX_CTL(pipe);
+		temp = I915_READ(reg);
+		temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+		temp |= snb_b_fdi_train_param[i];
+		I915_WRITE(reg, temp);
+
+		POSTING_READ(reg);
+		udelay(500);
+
+		for (retry = 0; retry < 5; retry++) {
+			reg = FDI_RX_IIR(pipe);
+			temp = I915_READ(reg);
+			DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+			if (temp & FDI_RX_SYMBOL_LOCK) {
+				I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
+				DRM_DEBUG_KMS("FDI train 2 done.\n");
+				break;
+			}
+			udelay(50);
+		}
+		if (retry < 5)
+			break;
+	}
+	if (i == 4)
+		DRM_ERROR("FDI train 2 fail!\n");
+
+	DRM_DEBUG_KMS("FDI train done.\n");
+}
+
+/* Manual link training for Ivy Bridge A0 parts */
+static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	u32 reg, temp, i, j;
+
+	/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
+	   for train result */
+	reg = FDI_RX_IMR(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_RX_SYMBOL_LOCK;
+	temp &= ~FDI_RX_BIT_LOCK;
+	I915_WRITE(reg, temp);
+
+	POSTING_READ(reg);
+	udelay(150);
+
+	DRM_DEBUG_KMS("FDI_RX_IIR before link train 0x%x\n",
+		      I915_READ(FDI_RX_IIR(pipe)));
+
+	/* Try each vswing and preemphasis setting twice before moving on */
+	for (j = 0; j < ARRAY_SIZE(snb_b_fdi_train_param) * 2; j++) {
+		/* disable first in case we need to retry */
+		reg = FDI_TX_CTL(pipe);
+		temp = I915_READ(reg);
+		temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
+		temp &= ~FDI_TX_ENABLE;
+		I915_WRITE(reg, temp);
+
+		reg = FDI_RX_CTL(pipe);
+		temp = I915_READ(reg);
+		temp &= ~FDI_LINK_TRAIN_AUTO;
+		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+		temp &= ~FDI_RX_ENABLE;
+		I915_WRITE(reg, temp);
+
+		/* enable CPU FDI TX and PCH FDI RX */
+		reg = FDI_TX_CTL(pipe);
+		temp = I915_READ(reg);
+		temp &= ~FDI_DP_PORT_WIDTH_MASK;
+		temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
+		temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
+		temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+		temp |= snb_b_fdi_train_param[j/2];
+		temp |= FDI_COMPOSITE_SYNC;
+		I915_WRITE(reg, temp | FDI_TX_ENABLE);
+
+		I915_WRITE(FDI_RX_MISC(pipe),
+			   FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
+
+		reg = FDI_RX_CTL(pipe);
+		temp = I915_READ(reg);
+		temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+		temp |= FDI_COMPOSITE_SYNC;
+		I915_WRITE(reg, temp | FDI_RX_ENABLE);
+
+		POSTING_READ(reg);
+		udelay(1); /* should be 0.5us */
+
+		for (i = 0; i < 4; i++) {
+			reg = FDI_RX_IIR(pipe);
+			temp = I915_READ(reg);
+			DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+
+			if (temp & FDI_RX_BIT_LOCK ||
+			    (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
+				I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
+				DRM_DEBUG_KMS("FDI train 1 done, level %i.\n",
+					      i);
+				break;
+			}
+			udelay(1); /* should be 0.5us */
+		}
+		if (i == 4) {
+			DRM_DEBUG_KMS("FDI train 1 fail on vswing %d\n", j / 2);
+			continue;
+		}
+
+		/* Train 2 */
+		reg = FDI_TX_CTL(pipe);
+		temp = I915_READ(reg);
+		temp &= ~FDI_LINK_TRAIN_NONE_IVB;
+		temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
+		I915_WRITE(reg, temp);
+
+		reg = FDI_RX_CTL(pipe);
+		temp = I915_READ(reg);
+		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+		temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
+		I915_WRITE(reg, temp);
+
+		POSTING_READ(reg);
+		udelay(2); /* should be 1.5us */
+
+		for (i = 0; i < 4; i++) {
+			reg = FDI_RX_IIR(pipe);
+			temp = I915_READ(reg);
+			DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+
+			if (temp & FDI_RX_SYMBOL_LOCK ||
+			    (I915_READ(reg) & FDI_RX_SYMBOL_LOCK)) {
+				I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
+				DRM_DEBUG_KMS("FDI train 2 done, level %i.\n",
+					      i);
+				goto train_done;
+			}
+			udelay(2); /* should be 1.5us */
+		}
+		if (i == 4)
+			DRM_DEBUG_KMS("FDI train 2 fail on vswing %d\n", j / 2);
+	}
+
+train_done:
+	DRM_DEBUG_KMS("FDI train done.\n");
+}
+
+void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc)
+{
+	struct drm_device *dev = intel_crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int pipe = intel_crtc->pipe;
+	u32 reg, temp;
+
+
+	/* enable PCH FDI RX PLL, wait warmup plus DMI latency */
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~(FDI_DP_PORT_WIDTH_MASK | (0x7 << 16));
+	temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
+	temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
+	I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
+
+	POSTING_READ(reg);
+	udelay(200);
+
+	/* Switch from Rawclk to PCDclk */
+	temp = I915_READ(reg);
+	I915_WRITE(reg, temp | FDI_PCDCLK);
+
+	POSTING_READ(reg);
+	udelay(200);
+
+	/* Enable CPU FDI TX PLL, always on for Ironlake */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	if ((temp & FDI_TX_PLL_ENABLE) == 0) {
+		I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
+
+		POSTING_READ(reg);
+		udelay(100);
+	}
+}
+
+void ironlake_fdi_pll_disable(struct intel_crtc *intel_crtc)
+{
+	struct drm_device *dev = intel_crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int pipe = intel_crtc->pipe;
+	u32 reg, temp;
+
+	/* Switch from PCDclk to Rawclk */
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	I915_WRITE(reg, temp & ~FDI_PCDCLK);
+
+	/* Disable CPU FDI TX PLL */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);
+
+	POSTING_READ(reg);
+	udelay(100);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);
+
+	/* Wait for the clocks to turn off. */
+	POSTING_READ(reg);
+	udelay(100);
+}
+
+void ironlake_fdi_disable(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	u32 reg, temp;
+
+	/* disable CPU FDI tx and PCH FDI rx */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
+	POSTING_READ(reg);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~(0x7 << 16);
+	temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
+	I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
+
+	POSTING_READ(reg);
+	udelay(100);
+
+	/* Ironlake workaround, disable clock pointer after downing FDI */
+	if (HAS_PCH_IBX(dev)) {
+		I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
+	}
+
+	/* still set train pattern 1 */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_LINK_TRAIN_NONE;
+	temp |= FDI_LINK_TRAIN_PATTERN_1;
+	I915_WRITE(reg, temp);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	if (HAS_PCH_CPT(dev)) {
+		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+		temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+	} else {
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_PATTERN_1;
+	}
+	/* BPC in FDI rx is consistent with that in PIPECONF */
+	temp &= ~(0x07 << 16);
+	temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
+	I915_WRITE(reg, temp);
+
+	POSTING_READ(reg);
+	udelay(100);
+}
+
+static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t temp;
+
+	temp = I915_READ(SOUTH_CHICKEN1);
+	if (temp & FDI_BC_BIFURCATION_SELECT)
+		return;
+
+	WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
+	WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
+
+	temp |= FDI_BC_BIFURCATION_SELECT;
+	DRM_DEBUG_KMS("enabling fdi C rx\n");
+	I915_WRITE(SOUTH_CHICKEN1, temp);
+	POSTING_READ(SOUTH_CHICKEN1);
+}
+
+void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
+{
+	struct drm_device *dev = intel_crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	switch (intel_crtc->pipe) {
+	case PIPE_A:
+		break;
+	case PIPE_B:
+		if (intel_crtc->config.fdi_lanes > 2)
+			WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT);
+		else
+			cpt_enable_fdi_bc_bifurcation(dev);
+
+		break;
+	case PIPE_C:
+		cpt_enable_fdi_bc_bifurcation(dev);
+
+		break;
+	default:
+		BUG();
+	}
+}
+
+static bool pipe_has_enabled_pch(struct intel_crtc *crtc)
+{
+	return crtc->base.enabled && crtc->active &&
+		crtc->config.has_pch_encoder;
+}
+
+void ivb_update_fdi_bc_resources(struct drm_i915_private *dev_priv)
+{
+	struct intel_crtc *pipe_B_crtc =
+		to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
+	struct intel_crtc *pipe_C_crtc =
+		to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_C]);
+	uint32_t temp;
+
+	/*
+	 * When everything is off disable fdi C so that we could enable fdi B
+	 * with all lanes. Note that we don't care about enabled pipes without
+	 * an enabled pch encoder.
+	 */
+	if (!pipe_has_enabled_pch(pipe_B_crtc) &&
+	    !pipe_has_enabled_pch(pipe_C_crtc)) {
+		WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
+		WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
+
+		temp = I915_READ(SOUTH_CHICKEN1);
+		temp &= ~FDI_BC_BIFURCATION_SELECT;
+		DRM_DEBUG_KMS("disabling fdi C rx\n");
+		I915_WRITE(SOUTH_CHICKEN1, temp);
+	}
+
+}
+
+void intel_fdi_normal_train(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	u32 reg, temp;
+
+	/* enable normal train */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	if (IS_IVYBRIDGE(dev)) {
+		temp &= ~FDI_LINK_TRAIN_NONE_IVB;
+		temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
+	} else {
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
+	}
+	I915_WRITE(reg, temp);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	if (HAS_PCH_CPT(dev)) {
+		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+		temp |= FDI_LINK_TRAIN_NORMAL_CPT;
+	} else {
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_NONE;
+	}
+	I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
+
+	/* wait one idle pattern time */
+	POSTING_READ(reg);
+	udelay(1000);
+
+	/* IVB wants error correction enabled */
+	if (IS_IVYBRIDGE(dev))
+		I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
+			   FDI_FE_ERRC_ENABLE);
+}
+
+static bool ironlake_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
+				     struct intel_crtc_config *pipe_config)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *pipe_B_crtc =
+		to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
+
+	DRM_DEBUG_KMS("checking fdi config on pipe %c, lanes %i\n",
+		      pipe_name(pipe), pipe_config->fdi_lanes);
+	if (pipe_config->fdi_lanes > 4) {
+		DRM_DEBUG_KMS("invalid fdi lane config on pipe %c: %i lanes\n",
+			      pipe_name(pipe), pipe_config->fdi_lanes);
+		return false;
+	}
+
+	if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
+		if (pipe_config->fdi_lanes > 2) {
+			DRM_DEBUG_KMS("only 2 lanes on haswell, required: %i lanes\n",
+				      pipe_config->fdi_lanes);
+			return false;
+		} else {
+			return true;
+		}
+	}
+
+	if (INTEL_INFO(dev)->num_pipes == 2)
+		return true;
+
+	/* Ivybridge 3 pipe is really complicated */
+	switch (pipe) {
+	case PIPE_A:
+		return true;
+	case PIPE_B:
+		if (dev_priv->pipe_to_crtc_mapping[PIPE_C]->enabled &&
+		    pipe_config->fdi_lanes > 2) {
+			DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
+				      pipe_name(pipe), pipe_config->fdi_lanes);
+			return false;
+		}
+		return true;
+	case PIPE_C:
+		if (!pipe_has_enabled_pch(pipe_B_crtc) ||
+		    pipe_B_crtc->config.fdi_lanes <= 2) {
+			if (pipe_config->fdi_lanes > 2) {
+				DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
+					      pipe_name(pipe), pipe_config->fdi_lanes);
+				return false;
+			}
+		} else {
+			DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n");
+			return false;
+		}
+		return true;
+	default:
+		BUG();
+	}
+}
+
+int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc,
+				struct intel_crtc_config *pipe_config)
+{
+	struct drm_device *dev = intel_crtc->base.dev;
+	struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
+	int lane, link_bw, fdi_dotclock;
+	bool setup_ok, needs_recompute = false;
+
+retry:
+	/* FDI is a binary signal running at ~2.7GHz, encoding
+	 * each output octet as 10 bits. The actual frequency
+	 * is stored as a divider into a 100MHz clock, and the
+	 * mode pixel clock is stored in units of 1KHz.
+	 * Hence the bw of each lane in terms of the mode signal
+	 * is:
+	 */
+	link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
+
+	fdi_dotclock = adjusted_mode->crtc_clock;
+
+	lane = ironlake_get_lanes_required(fdi_dotclock, link_bw,
+					   pipe_config->pipe_bpp);
+
+	pipe_config->fdi_lanes = lane;
+
+	intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock,
+			       link_bw, &pipe_config->fdi_m_n);
+
+	setup_ok = ironlake_check_fdi_lanes(intel_crtc->base.dev,
+					    intel_crtc->pipe, pipe_config);
+	if (!setup_ok && pipe_config->pipe_bpp > 6*3) {
+		pipe_config->pipe_bpp -= 2*3;
+		DRM_DEBUG_KMS("fdi link bw constraint, reducing pipe bpp to %i\n",
+			      pipe_config->pipe_bpp);
+		needs_recompute = true;
+		pipe_config->bw_constrained = true;
+
+		goto retry;
+	}
+
+	if (needs_recompute)
+		return FDI_COMPUTE_CONFIG_RETRY;
+
+	return setup_ok ? 0 : -EINVAL;
+}
+
+static const long hsw_ddi_buf_ctl_values[] = {
+	DDI_BUF_EMP_400MV_0DB_HSW,
+	DDI_BUF_EMP_400MV_3_5DB_HSW,
+	DDI_BUF_EMP_400MV_6DB_HSW,
+	DDI_BUF_EMP_400MV_9_5DB_HSW,
+	DDI_BUF_EMP_600MV_0DB_HSW,
+	DDI_BUF_EMP_600MV_3_5DB_HSW,
+	DDI_BUF_EMP_600MV_6DB_HSW,
+	DDI_BUF_EMP_800MV_0DB_HSW,
+	DDI_BUF_EMP_800MV_3_5DB_HSW
+};
+
+/*
+ * Starting with Haswell, different DDI ports can work in FDI mode for
+ * connection to the PCH-located connectors. For this, it is necessary to train
+ * both the DDI port and PCH receiver for the desired DDI buffer settings.
+ *
+ * The recommended port to work in FDI mode is DDI E, which we use here. Also,
+ * please note that when FDI mode is active on DDI E, it shares 2 lines with
+ * DDI A (which is used for eDP)
+ */
+static void hsw_fdi_link_train(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	u32 temp, i, rx_ctl_val;
+
+	/* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the
+	 * mode set "sequence for CRT port" document:
+	 * - TP1 to TP2 time with the default value
+	 * - FDI delay to 90h
+	 *
+	 * WaFDIAutoLinkSetTimingOverrride:hsw
+	 */
+	I915_WRITE(_FDI_RXA_MISC, FDI_RX_PWRDN_LANE1_VAL(2) |
+				  FDI_RX_PWRDN_LANE0_VAL(2) |
+				  FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
+
+	/* Enable the PCH Receiver FDI PLL */
+	rx_ctl_val = dev_priv->fdi_rx_config | FDI_RX_ENHANCE_FRAME_ENABLE |
+		     FDI_RX_PLL_ENABLE |
+		     FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
+	I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
+	POSTING_READ(_FDI_RXA_CTL);
+	udelay(220);
+
+	/* Switch from Rawclk to PCDclk */
+	rx_ctl_val |= FDI_PCDCLK;
+	I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
+
+	/* Configure Port Clock Select */
+	I915_WRITE(PORT_CLK_SEL(PORT_E), intel_crtc->ddi_pll_sel);
+
+	/* Start the training iterating through available voltages and emphasis,
+	 * testing each value twice. */
+	for (i = 0; i < ARRAY_SIZE(hsw_ddi_buf_ctl_values) * 2; i++) {
+		/* Configure DP_TP_CTL with auto-training */
+		I915_WRITE(DP_TP_CTL(PORT_E),
+					DP_TP_CTL_FDI_AUTOTRAIN |
+					DP_TP_CTL_ENHANCED_FRAME_ENABLE |
+					DP_TP_CTL_LINK_TRAIN_PAT1 |
+					DP_TP_CTL_ENABLE);
+
+		/* Configure and enable DDI_BUF_CTL for DDI E with next voltage.
+		 * DDI E does not support port reversal, the functionality is
+		 * achieved on the PCH side in FDI_RX_CTL, so no need to set the
+		 * port reversal bit */
+		I915_WRITE(DDI_BUF_CTL(PORT_E),
+			   DDI_BUF_CTL_ENABLE |
+			   ((intel_crtc->config.fdi_lanes - 1) << 1) |
+			   hsw_ddi_buf_ctl_values[i / 2]);
+		POSTING_READ(DDI_BUF_CTL(PORT_E));
+
+		udelay(600);
+
+		/* Program PCH FDI Receiver TU */
+		I915_WRITE(_FDI_RXA_TUSIZE1, TU_SIZE(64));
+
+		/* Enable PCH FDI Receiver with auto-training */
+		rx_ctl_val |= FDI_RX_ENABLE | FDI_LINK_TRAIN_AUTO;
+		I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
+		POSTING_READ(_FDI_RXA_CTL);
+
+		/* Wait for FDI receiver lane calibration */
+		udelay(30);
+
+		/* Unset FDI_RX_MISC pwrdn lanes */
+		temp = I915_READ(_FDI_RXA_MISC);
+		temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
+		I915_WRITE(_FDI_RXA_MISC, temp);
+		POSTING_READ(_FDI_RXA_MISC);
+
+		/* Wait for FDI auto training time */
+		udelay(5);
+
+		temp = I915_READ(DP_TP_STATUS(PORT_E));
+		if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) {
+			DRM_DEBUG_KMS("FDI link training done on step %d\n", i);
+
+			/* Enable normal pixel sending for FDI */
+			I915_WRITE(DP_TP_CTL(PORT_E),
+				   DP_TP_CTL_FDI_AUTOTRAIN |
+				   DP_TP_CTL_LINK_TRAIN_NORMAL |
+				   DP_TP_CTL_ENHANCED_FRAME_ENABLE |
+				   DP_TP_CTL_ENABLE);
+
+			return;
+		}
+
+		temp = I915_READ(DDI_BUF_CTL(PORT_E));
+		temp &= ~DDI_BUF_CTL_ENABLE;
+		I915_WRITE(DDI_BUF_CTL(PORT_E), temp);
+		POSTING_READ(DDI_BUF_CTL(PORT_E));
+
+		/* Disable DP_TP_CTL and FDI_RX_CTL and retry */
+		temp = I915_READ(DP_TP_CTL(PORT_E));
+		temp &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
+		temp |= DP_TP_CTL_LINK_TRAIN_PAT1;
+		I915_WRITE(DP_TP_CTL(PORT_E), temp);
+		POSTING_READ(DP_TP_CTL(PORT_E));
+
+		intel_wait_ddi_buf_idle(dev_priv, PORT_E);
+
+		rx_ctl_val &= ~FDI_RX_ENABLE;
+		I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
+		POSTING_READ(_FDI_RXA_CTL);
+
+		/* Reset FDI_RX_MISC pwrdn lanes */
+		temp = I915_READ(_FDI_RXA_MISC);
+		temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
+		temp |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2);
+		I915_WRITE(_FDI_RXA_MISC, temp);
+		POSTING_READ(_FDI_RXA_MISC);
+	}
+
+	DRM_ERROR("FDI link training failed!\n");
+}
+
+void intel_fdi_init(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+
+	if (!HAS_PCH_SPLIT(dev))
+		return;
+
+	if (IS_GEN5(dev))
+		dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
+	else if (IS_GEN6(dev))
+		dev_priv->display.fdi_link_train = gen6_fdi_link_train;
+	else if (IS_IVYBRIDGE(dev))
+		/* FIXME: detect B0+ stepping and use auto training */
+		dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
+	else if (IS_HASWELL(dev) || IS_GEN8(dev))
+		dev_priv->display.fdi_link_train = hsw_fdi_link_train;
+}
