@@ -2119,8 +2119,8 @@ i915_gem_init_seqno(struct drm_device *dev, u32 seqno)
for_each_ring(ring, dev_priv, i) {
intel_ring_init_seqno(ring, seqno);
- for (j = 0; j < ARRAY_SIZE(ring->sync_seqno); j++)
- ring->sync_seqno[j] = 0;
+ for (j = 0; j < ARRAY_SIZE(ring->semaphore.sync_seqno); j++)
+ ring->semaphore.sync_seqno[j] = 0;
}
return 0;
@@ -2692,7 +2692,7 @@ i915_gem_object_sync(struct drm_i915_gem_object *obj,
idx = intel_ring_sync_index(from, to);
seqno = obj->last_read_seqno;
- if (seqno <= from->sync_seqno[idx])
+ if (seqno <= from->semaphore.sync_seqno[idx])
return 0;
ret = i915_gem_check_olr(obj->ring, seqno);
@@ -2700,13 +2700,13 @@ i915_gem_object_sync(struct drm_i915_gem_object *obj,
return ret;
trace_i915_gem_ring_sync_to(from, to, seqno);
- ret = to->sync_to(to, from, seqno);
+ ret = to->semaphore.sync_to(to, from, seqno);
if (!ret)
/* We use last_read_seqno because sync_to()
* might have just caused seqno wrap under
* the radar.
*/
- from->sync_seqno[idx] = obj->last_read_seqno;
+ from->semaphore.sync_seqno[idx] = obj->last_read_seqno;
return ret;
}
@@ -757,14 +757,14 @@ static void i915_record_ring_state(struct drm_device *dev,
= I915_READ(RING_SYNC_0(ring->mmio_base));
ering->semaphore_mboxes[1]
= I915_READ(RING_SYNC_1(ring->mmio_base));
- ering->semaphore_seqno[0] = ring->sync_seqno[0];
- ering->semaphore_seqno[1] = ring->sync_seqno[1];
+ ering->semaphore_seqno[0] = ring->semaphore.sync_seqno[0];
+ ering->semaphore_seqno[1] = ring->semaphore.sync_seqno[1];
}
if (HAS_VEBOX(dev)) {
ering->semaphore_mboxes[2] =
I915_READ(RING_SYNC_2(ring->mmio_base));
- ering->semaphore_seqno[2] = ring->sync_seqno[2];
+ ering->semaphore_seqno[2] = ring->semaphore.sync_seqno[2];
}
if (INTEL_INFO(dev)->gen >= 4) {
@@ -2595,8 +2595,7 @@ semaphore_wait_to_signaller_ring(struct intel_ring_buffer *ring, u32 ipehr)
if(ring == signaller)
continue;
- if (sync_bits ==
- signaller->semaphore_register[ring->id])
+ if (sync_bits == signaller->semaphore.mbox.wait[ring->id])
return signaller;
}
}
@@ -706,7 +706,7 @@ gen6_add_request(struct intel_ring_buffer *ring)
if (i915_semaphore_is_enabled(dev)) {
for_each_ring(useless, dev_priv, i) {
- u32 mbox_reg = ring->signal_mbox[i];
+ u32 mbox_reg = ring->semaphore.mbox.signal[i];
if (mbox_reg != GEN6_NOSYNC)
update_mboxes(ring, mbox_reg);
}
@@ -740,10 +740,11 @@ gen6_ring_sync(struct intel_ring_buffer *waiter,
struct intel_ring_buffer *signaller,
u32 seqno)
{
- int ret;
u32 dw1 = MI_SEMAPHORE_MBOX |
MI_SEMAPHORE_COMPARE |
MI_SEMAPHORE_REGISTER;
+ u32 wait_mbox = signaller->semaphore.mbox.wait[waiter->id];
+ int ret;
/* Throughout all of the GEM code, seqno passed implies our current
* seqno is >= the last seqno executed. However for hardware the
@@ -751,8 +752,7 @@ gen6_ring_sync(struct intel_ring_buffer *waiter,
*/
seqno -= 1;
- WARN_ON(signaller->semaphore_register[waiter->id] ==
- MI_SEMAPHORE_SYNC_INVALID);
+ WARN_ON(wait_mbox == MI_SEMAPHORE_SYNC_INVALID);
ret = intel_ring_begin(waiter, 4);
if (ret)
@@ -760,9 +760,7 @@ gen6_ring_sync(struct intel_ring_buffer *waiter,
/* If seqno wrap happened, omit the wait with no-ops */
if (likely(!i915_gem_has_seqno_wrapped(waiter->dev, seqno))) {
- intel_ring_emit(waiter,
- dw1 |
- signaller->semaphore_register[waiter->id]);
+ intel_ring_emit(waiter, dw1 | wait_mbox);
intel_ring_emit(waiter, seqno);
intel_ring_emit(waiter, 0);
intel_ring_emit(waiter, MI_NOOP);
@@ -1414,7 +1412,7 @@ static int intel_init_ring_buffer(struct drm_device *dev,
INIT_LIST_HEAD(&ring->active_list);
INIT_LIST_HEAD(&ring->request_list);
ring->size = 32 * PAGE_SIZE;
- memset(ring->sync_seqno, 0, sizeof(ring->sync_seqno));
+ memset(ring->semaphore.sync_seqno, 0, sizeof(ring->semaphore.sync_seqno));
init_waitqueue_head(&ring->irq_queue);
@@ -1921,23 +1919,23 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
ring->irq_enable_mask = GT_RENDER_USER_INTERRUPT;
ring->get_seqno = gen6_ring_get_seqno;
ring->set_seqno = ring_set_seqno;
- ring->sync_to = gen6_ring_sync;
+ ring->semaphore.sync_to = gen6_ring_sync;
/*
* The current semaphore is only applied on pre-gen8 platform.
* And there is no VCS2 ring on the pre-gen8 platform. So the
* semaphore between RCS and VCS2 is initialized as INVALID.
* Gen8 will initialize the sema between VCS2 and RCS later.
*/
- ring->semaphore_register[RCS] = MI_SEMAPHORE_SYNC_INVALID;
- ring->semaphore_register[VCS] = MI_SEMAPHORE_SYNC_RV;
- ring->semaphore_register[BCS] = MI_SEMAPHORE_SYNC_RB;
- ring->semaphore_register[VECS] = MI_SEMAPHORE_SYNC_RVE;
- ring->semaphore_register[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
- ring->signal_mbox[RCS] = GEN6_NOSYNC;
- ring->signal_mbox[VCS] = GEN6_VRSYNC;
- ring->signal_mbox[BCS] = GEN6_BRSYNC;
- ring->signal_mbox[VECS] = GEN6_VERSYNC;
- ring->signal_mbox[VCS2] = GEN6_NOSYNC;
+ ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_INVALID;
+ ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_RV;
+ ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_RB;
+ ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_RVE;
+ ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
+ ring->semaphore.mbox.signal[RCS] = GEN6_NOSYNC;
+ ring->semaphore.mbox.signal[VCS] = GEN6_VRSYNC;
+ ring->semaphore.mbox.signal[BCS] = GEN6_BRSYNC;
+ ring->semaphore.mbox.signal[VECS] = GEN6_VERSYNC;
+ ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
} else if (IS_GEN5(dev)) {
ring->add_request = pc_render_add_request;
ring->flush = gen4_render_ring_flush;
@@ -2105,23 +2103,23 @@ int intel_init_bsd_ring_buffer(struct drm_device *dev)
ring->dispatch_execbuffer =
gen6_ring_dispatch_execbuffer;
}
- ring->sync_to = gen6_ring_sync;
+ ring->semaphore.sync_to = gen6_ring_sync;
/*
* The current semaphore is only applied on pre-gen8 platform.
* And there is no VCS2 ring on the pre-gen8 platform. So the
* semaphore between VCS and VCS2 is initialized as INVALID.
* Gen8 will initialize the sema between VCS2 and VCS later.
*/
- ring->semaphore_register[RCS] = MI_SEMAPHORE_SYNC_VR;
- ring->semaphore_register[VCS] = MI_SEMAPHORE_SYNC_INVALID;
- ring->semaphore_register[BCS] = MI_SEMAPHORE_SYNC_VB;
- ring->semaphore_register[VECS] = MI_SEMAPHORE_SYNC_VVE;
- ring->semaphore_register[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
- ring->signal_mbox[RCS] = GEN6_RVSYNC;
- ring->signal_mbox[VCS] = GEN6_NOSYNC;
- ring->signal_mbox[BCS] = GEN6_BVSYNC;
- ring->signal_mbox[VECS] = GEN6_VEVSYNC;
- ring->signal_mbox[VCS2] = GEN6_NOSYNC;
+ ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_VR;
+ ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_INVALID;
+ ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_VB;
+ ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_VVE;
+ ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
+ ring->semaphore.mbox.signal[RCS] = GEN6_RVSYNC;
+ ring->semaphore.mbox.signal[VCS] = GEN6_NOSYNC;
+ ring->semaphore.mbox.signal[BCS] = GEN6_BVSYNC;
+ ring->semaphore.mbox.signal[VECS] = GEN6_VEVSYNC;
+ ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
} else {
ring->mmio_base = BSD_RING_BASE;
ring->flush = bsd_ring_flush;
@@ -2173,23 +2171,23 @@ int intel_init_bsd2_ring_buffer(struct drm_device *dev)
ring->irq_put = gen8_ring_put_irq;
ring->dispatch_execbuffer =
gen8_ring_dispatch_execbuffer;
- ring->sync_to = gen6_ring_sync;
+ ring->semaphore.sync_to = gen6_ring_sync;
/*
* The current semaphore is only applied on the pre-gen8. And there
* is no bsd2 ring on the pre-gen8. So now the semaphore_register
* between VCS2 and other ring is initialized as invalid.
* Gen8 will initialize the sema between VCS2 and other ring later.
*/
- ring->semaphore_register[RCS] = MI_SEMAPHORE_SYNC_INVALID;
- ring->semaphore_register[VCS] = MI_SEMAPHORE_SYNC_INVALID;
- ring->semaphore_register[BCS] = MI_SEMAPHORE_SYNC_INVALID;
- ring->semaphore_register[VECS] = MI_SEMAPHORE_SYNC_INVALID;
- ring->semaphore_register[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
- ring->signal_mbox[RCS] = GEN6_NOSYNC;
- ring->signal_mbox[VCS] = GEN6_NOSYNC;
- ring->signal_mbox[BCS] = GEN6_NOSYNC;
- ring->signal_mbox[VECS] = GEN6_NOSYNC;
- ring->signal_mbox[VCS2] = GEN6_NOSYNC;
+ ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_INVALID;
+ ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_INVALID;
+ ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_INVALID;
+ ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_INVALID;
+ ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
+ ring->semaphore.mbox.signal[RCS] = GEN6_NOSYNC;
+ ring->semaphore.mbox.signal[VCS] = GEN6_NOSYNC;
+ ring->semaphore.mbox.signal[BCS] = GEN6_NOSYNC;
+ ring->semaphore.mbox.signal[VECS] = GEN6_NOSYNC;
+ ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
ring->init = init_ring_common;
@@ -2222,23 +2220,23 @@ int intel_init_blt_ring_buffer(struct drm_device *dev)
ring->irq_put = gen6_ring_put_irq;
ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer;
}
- ring->sync_to = gen6_ring_sync;
+ ring->semaphore.sync_to = gen6_ring_sync;
/*
* The current semaphore is only applied on pre-gen8 platform. And
* there is no VCS2 ring on the pre-gen8 platform. So the semaphore
* between BCS and VCS2 is initialized as INVALID.
* Gen8 will initialize the sema between BCS and VCS2 later.
*/
- ring->semaphore_register[RCS] = MI_SEMAPHORE_SYNC_BR;
- ring->semaphore_register[VCS] = MI_SEMAPHORE_SYNC_BV;
- ring->semaphore_register[BCS] = MI_SEMAPHORE_SYNC_INVALID;
- ring->semaphore_register[VECS] = MI_SEMAPHORE_SYNC_BVE;
- ring->semaphore_register[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
- ring->signal_mbox[RCS] = GEN6_RBSYNC;
- ring->signal_mbox[VCS] = GEN6_VBSYNC;
- ring->signal_mbox[BCS] = GEN6_NOSYNC;
- ring->signal_mbox[VECS] = GEN6_VEBSYNC;
- ring->signal_mbox[VCS2] = GEN6_NOSYNC;
+ ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_BR;
+ ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_BV;
+ ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_INVALID;
+ ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_BVE;
+ ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
+ ring->semaphore.mbox.signal[RCS] = GEN6_RBSYNC;
+ ring->semaphore.mbox.signal[VCS] = GEN6_VBSYNC;
+ ring->semaphore.mbox.signal[BCS] = GEN6_NOSYNC;
+ ring->semaphore.mbox.signal[VECS] = GEN6_VEBSYNC;
+ ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
ring->init = init_ring_common;
return intel_init_ring_buffer(dev, ring);
@@ -2271,17 +2269,17 @@ int intel_init_vebox_ring_buffer(struct drm_device *dev)
ring->irq_put = hsw_vebox_put_irq;
ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer;
}
- ring->sync_to = gen6_ring_sync;
- ring->semaphore_register[RCS] = MI_SEMAPHORE_SYNC_VER;
- ring->semaphore_register[VCS] = MI_SEMAPHORE_SYNC_VEV;
- ring->semaphore_register[BCS] = MI_SEMAPHORE_SYNC_VEB;
- ring->semaphore_register[VECS] = MI_SEMAPHORE_SYNC_INVALID;
- ring->semaphore_register[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
- ring->signal_mbox[RCS] = GEN6_RVESYNC;
- ring->signal_mbox[VCS] = GEN6_VVESYNC;
- ring->signal_mbox[BCS] = GEN6_BVESYNC;
- ring->signal_mbox[VECS] = GEN6_NOSYNC;
- ring->signal_mbox[VCS2] = GEN6_NOSYNC;
+ ring->semaphore.sync_to = gen6_ring_sync;
+ ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_VER;
+ ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_VEV;
+ ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_VEB;
+ ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_INVALID;
+ ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
+ ring->semaphore.mbox.signal[RCS] = GEN6_RVESYNC;
+ ring->semaphore.mbox.signal[VCS] = GEN6_VVESYNC;
+ ring->semaphore.mbox.signal[BCS] = GEN6_BVESYNC;
+ ring->semaphore.mbox.signal[VECS] = GEN6_NOSYNC;
+ ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
ring->init = init_ring_common;
return intel_init_ring_buffer(dev, ring);
@@ -90,7 +90,6 @@ struct intel_ring_buffer {
unsigned irq_refcount; /* protected by dev_priv->irq_lock */
u32 irq_enable_mask; /* bitmask to enable ring interrupt */
u32 trace_irq_seqno;
- u32 sync_seqno[I915_NUM_RINGS-1];
bool __must_check (*irq_get)(struct intel_ring_buffer *ring);
void (*irq_put)(struct intel_ring_buffer *ring);
@@ -118,14 +117,20 @@ struct intel_ring_buffer {
#define I915_DISPATCH_SECURE 0x1
#define I915_DISPATCH_PINNED 0x2
void (*cleanup)(struct intel_ring_buffer *ring);
- int (*sync_to)(struct intel_ring_buffer *ring,
+
+ struct {
+ u32 sync_seqno[I915_NUM_RINGS-1];
+ /* AKA wait() */
+ int (*sync_to)(struct intel_ring_buffer *ring,
struct intel_ring_buffer *to,
u32 seqno);
-
- /* our mbox written by others */
- u32 semaphore_register[I915_NUM_RINGS];
- /* mboxes this ring signals to */
- u32 signal_mbox[I915_NUM_RINGS];
+ struct {
+ /* our mbox written by others */
+ u32 wait[I915_NUM_RINGS];
+ /* mboxes this ring signals to */
+ u32 signal[I915_NUM_RINGS];
+ } mbox;
+ } semaphore;
/**
* List of objects currently involved in rendering from the