| Message ID | 1426073581-30504-2-git-send-email-ander.conselvan.de.oliveira@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 11 March 2015 at 11:33, Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> wrote: > The tests exercise different combinations of enabling pipe B with modes > that require more than 2 lanes and then enabling pipe C. > > v2: Added a couple more tests for different pipe transitions. (Ander) > Use custom modes to make the test reliable. (Daniel) > --- > tests/Makefile.sources | 1 + > tests/kms_pipe_b_c_dpms.c | 286 ++++++++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 287 insertions(+) > create mode 100644 tests/kms_pipe_b_c_dpms.c Please add the test binary to .gitignore and add a short description of the test using the IGT_TEST_DESCRIPTION macro. > > diff --git a/tests/Makefile.sources b/tests/Makefile.sources > index 9ab0ff4..9e43a64 100644 > --- a/tests/Makefile.sources > +++ b/tests/Makefile.sources > @@ -73,6 +73,7 @@ TESTS_progs_M = \ > kms_nuclear \ > kms_pipe_crc_basic \ > kms_plane \ > + kms_pipe_b_c_dpms \ > kms_psr_sink_crc \ > kms_render \ > kms_rotation_crc \ > diff --git a/tests/kms_pipe_b_c_dpms.c b/tests/kms_pipe_b_c_dpms.c > new file mode 100644 > index 0000000..69394f4 > --- /dev/null > +++ b/tests/kms_pipe_b_c_dpms.c > @@ -0,0 +1,286 @@ > +/* > + * Copyright © 2015 Intel Corporation > + * > + * Permission is hereby granted, free of charge, to any person obtaining a > + * copy of this software and associated documentation files (the "Software"), > + * to deal in the Software without restriction, including without limitation > + * the rights to use, copy, modify, merge, publish, distribute, sublicense, > + * and/or sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following conditions: > + * > + * The above copyright notice and this permission notice (including the next > + * paragraph) shall be included in all copies or substantial portions of the > + * Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS > + * IN THE SOFTWARE. > + * > + * Authors: > + * Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> > + */ > + > +#include "drmtest.h" > +#include "igt_kms.h" > +#include "intel_chipset.h" > + > +typedef struct { > + int drm_fd; > + igt_display_t display; > +} data_t; > + > +drmModeModeInfo mode_3_lanes = { > + .clock = 173000, > + .hdisplay = 1920, > + .hsync_start = 2048, > + .hsync_end = 2248, > + .htotal = 2576, > + .vdisplay = 1080, > + .vsync_start = 1083, > + .vsync_end = 1088, > + .vtotal = 1120, > + .vrefresh = 60, > + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC, > + .name = "3_lanes", > +}; > + > +drmModeModeInfo mode_2_lanes = { > + .clock = 138500, > + .hdisplay = 1920, > + .hsync_start = 1968, > + .hsync_end = 2000, > + .htotal = 2080, > + .vdisplay = 1080, > + .vsync_start = 1083, > + .vsync_end = 1088, > + .vtotal = 1111, > + .vrefresh = 60, > + .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC, > + .name = "2_lanes", > +}; > + > +static int > +disable_pipe(data_t *data, enum pipe pipe, igt_output_t *output) > +{ > + igt_plane_t *primary; > + > + igt_output_set_pipe(output, pipe); > + primary = igt_output_get_plane(output, 0); > + igt_plane_set_fb(primary, NULL); > + return igt_display_commit(&data->display); > +} > + > +static int > +set_mode_on_pipe(data_t *data, enum pipe pipe, igt_output_t *output) > +{ > + igt_plane_t *primary; > + drmModeModeInfo *mode; > + struct igt_fb fb; > + int fb_id; > + > + igt_output_set_pipe(output, pipe); > + > + mode = igt_output_get_mode(output); > + > + primary = igt_output_get_plane(output, 0); > + > + fb_id = igt_create_color_fb(data->drm_fd, > + mode->hdisplay, mode->vdisplay, > + DRM_FORMAT_XRGB8888, I915_TILING_NONE, > + 1.0, 1.0, 1.0, &fb); > + igt_assert(fb_id >= 0); > + > + igt_plane_set_fb(primary, &fb); > + return igt_display_try_commit2(&data->display, COMMIT_LEGACY); > +} > + > +static int > +set_big_mode_on_pipe(data_t *data, enum pipe pipe, igt_output_t *output) > +{ > + igt_output_override_mode(output, &mode_3_lanes); > + return set_mode_on_pipe(data, pipe, output); > +} > + > +static int > +set_normal_mode_on_pipe(data_t *data, enum pipe pipe, igt_output_t *output) > +{ > + igt_output_override_mode(output, &mode_2_lanes); > + return set_mode_on_pipe(data, pipe, output); > +} > + > +static void > +find_outputs(data_t *data, igt_output_t **output1, igt_output_t **output2) > +{ > + int count = 0; > + igt_output_t *output; > + > + *output1 = NULL; > + *output2 = NULL; > + > + for_each_connected_output(&data->display, output) { > + if (!(*output1)) > + *output1 = output; > + else if (!(*output2)) > + *output2 = output; > + > + igt_output_set_pipe(output, PIPE_ANY); > + count++; > + } > + > + igt_skip_on_f(count < 2, "Not enough connected outputs\n"); > +} > + > +static void > +test_dpms(data_t *data) > +{ > + igt_output_t *output1, *output2; > + int ret; > + > + find_outputs(data, &output1, &output2); > + > + igt_info("Pipe %s will use connector %s\n", > + kmstest_pipe_name(PIPE_B), igt_output_name(output1)); > + igt_info("Pipe %s will use connector %s\n", > + kmstest_pipe_name(PIPE_C), igt_output_name(output2)); > + > + ret = set_big_mode_on_pipe(data, PIPE_B, output1); > + igt_assert(ret == 0); > + > + kmstest_set_connector_dpms(data->drm_fd, output1->config.connector, DRM_MODE_DPMS_OFF); > + > + ret = set_big_mode_on_pipe(data, PIPE_C, output2); > + igt_assert(ret != 0); > +} > + > +static void > +test_lane_reduction(data_t *data) > +{ > + igt_output_t *output1, *output2; > + int ret; > + > + find_outputs(data, &output1, &output2); > + > + igt_info("Pipe %s will use connector %s\n", > + kmstest_pipe_name(PIPE_B), igt_output_name(output1)); > + igt_info("Pipe %s will use connector %s\n", > + kmstest_pipe_name(PIPE_C), igt_output_name(output2)); > + > + ret = set_big_mode_on_pipe(data, PIPE_B, output1); > + igt_assert(ret == 0); > + > + ret = set_normal_mode_on_pipe(data, PIPE_B, output1); > + igt_assert(ret == 0); > + > + ret = set_normal_mode_on_pipe(data, PIPE_C, output2); > + igt_assert(ret == 0); > +} > + > +static void > +test_disable_pipe_B(data_t *data) > +{ > + igt_output_t *output1, *output2; > + int ret; > + > + find_outputs(data, &output1, &output2); > + > + igt_info("Pipe %s will use connector %s\n", > + kmstest_pipe_name(PIPE_B), igt_output_name(output1)); > + igt_info("Pipe %s will use connector %s\n", > + kmstest_pipe_name(PIPE_C), igt_output_name(output2)); > + > + ret = set_big_mode_on_pipe(data, PIPE_B, output1); > + igt_assert(ret == 0); > + > + ret = disable_pipe(data, PIPE_B, output1); > + igt_assert(ret == 0); > + > + ret = set_normal_mode_on_pipe(data, PIPE_C, output2); > + igt_assert(ret == 0); > + > + ret = set_normal_mode_on_pipe(data, PIPE_B, output1); > + igt_assert(ret == 0); > +} > + > +static void > +test_from_C_to_B_with_3_lanes(data_t *data) > +{ > + igt_output_t *output1, *output2; > + int ret; > + > + find_outputs(data, &output1, &output2); > + > + igt_info("Pipe %s will use connector %s\n", > + kmstest_pipe_name(PIPE_B), igt_output_name(output1)); > + igt_info("Pipe %s will use connector %s\n", > + kmstest_pipe_name(PIPE_C), igt_output_name(output2)); > + > + ret = set_normal_mode_on_pipe(data, PIPE_C, output2); > + igt_assert(ret == 0); > + > + ret = disable_pipe(data, PIPE_C, output2); > + igt_assert(ret == 0); > + > + ret = set_big_mode_on_pipe(data, PIPE_B, output1); > + igt_assert(ret == 0); > +} > + > +static void > +test_fail_enable_pipe_C_while_B_has_3_lanes(data_t *data) > +{ > + igt_output_t *output1, *output2; > + int ret; > + > + find_outputs(data, &output1, &output2); > + > + igt_info("Pipe %s will use connector %s\n", > + kmstest_pipe_name(PIPE_B), igt_output_name(output1)); > + igt_info("Pipe %s will use connector %s\n", > + kmstest_pipe_name(PIPE_C), igt_output_name(output2)); > + > + ret = set_big_mode_on_pipe(data, PIPE_B, output1); > + igt_assert(ret == 0); > + > + ret = set_normal_mode_on_pipe(data, PIPE_C, output2); > + igt_assert(ret != 0); > +} > + > +static data_t data; > +igt_main > +{ > + int devid; > + > + igt_skip_on_simulation(); > + > + igt_fixture { > + data.drm_fd = drm_open_any_master(); > + devid = intel_get_drm_devid(data.drm_fd); > + > + kmstest_set_vt_graphics_mode(); > + igt_display_init(&data.display, data.drm_fd); > + } > + > + igt_skip_on(!IS_IVYBRIDGE(devid)); > + > + igt_subtest("pipe-B-dpms-off-modeset-pipe-C") > + test_dpms(&data); > + > + igt_subtest("pipe-B-double-modeset-then-modeset-pipe-C") > + test_lane_reduction(&data); > + > + igt_subtest("disable-pipe-B-enable-pipe-C") > + test_disable_pipe_B(&data); > + > + igt_subtest("from-pipe-C-to-B-with-3-lanes") > + test_from_C_to_B_with_3_lanes(&data); > + > + igt_subtest("enable-pipe-C-while-B-has-3-lanes") > + test_fail_enable_pipe_C_while_B_has_3_lanes(&data); > + > + igt_fixture { > + igt_display_fini(&data.display); > + } > +} > -- > 2.1.0 > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
diff --git a/tests/Makefile.sources b/tests/Makefile.sources index 9ab0ff4..9e43a64 100644 --- a/tests/Makefile.sources +++ b/tests/Makefile.sources @@ -73,6 +73,7 @@ TESTS_progs_M = \ kms_nuclear \ kms_pipe_crc_basic \ kms_plane \ + kms_pipe_b_c_dpms \ kms_psr_sink_crc \ kms_render \ kms_rotation_crc \ diff --git a/tests/kms_pipe_b_c_dpms.c b/tests/kms_pipe_b_c_dpms.c new file mode 100644 index 0000000..69394f4 --- /dev/null +++ b/tests/kms_pipe_b_c_dpms.c @@ -0,0 +1,286 @@ +/* + * Copyright © 2015 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> + */ + +#include "drmtest.h" +#include "igt_kms.h" +#include "intel_chipset.h" + +typedef struct { + int drm_fd; + igt_display_t display; +} data_t; + +drmModeModeInfo mode_3_lanes = { + .clock = 173000, + .hdisplay = 1920, + .hsync_start = 2048, + .hsync_end = 2248, + .htotal = 2576, + .vdisplay = 1080, + .vsync_start = 1083, + .vsync_end = 1088, + .vtotal = 1120, + .vrefresh = 60, + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC, + .name = "3_lanes", +}; + +drmModeModeInfo mode_2_lanes = { + .clock = 138500, + .hdisplay = 1920, + .hsync_start = 1968, + .hsync_end = 2000, + .htotal = 2080, + .vdisplay = 1080, + .vsync_start = 1083, + .vsync_end = 1088, + .vtotal = 1111, + .vrefresh = 60, + .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC, + .name = "2_lanes", +}; + +static int +disable_pipe(data_t *data, enum pipe pipe, igt_output_t *output) +{ + igt_plane_t *primary; + + igt_output_set_pipe(output, pipe); + primary = igt_output_get_plane(output, 0); + igt_plane_set_fb(primary, NULL); + return igt_display_commit(&data->display); +} + +static int +set_mode_on_pipe(data_t *data, enum pipe pipe, igt_output_t *output) +{ + igt_plane_t *primary; + drmModeModeInfo *mode; + struct igt_fb fb; + int fb_id; + + igt_output_set_pipe(output, pipe); + + mode = igt_output_get_mode(output); + + primary = igt_output_get_plane(output, 0); + + fb_id = igt_create_color_fb(data->drm_fd, + mode->hdisplay, mode->vdisplay, + DRM_FORMAT_XRGB8888, I915_TILING_NONE, + 1.0, 1.0, 1.0, &fb); + igt_assert(fb_id >= 0); + + igt_plane_set_fb(primary, &fb); + return igt_display_try_commit2(&data->display, COMMIT_LEGACY); +} + +static int +set_big_mode_on_pipe(data_t *data, enum pipe pipe, igt_output_t *output) +{ + igt_output_override_mode(output, &mode_3_lanes); + return set_mode_on_pipe(data, pipe, output); +} + +static int +set_normal_mode_on_pipe(data_t *data, enum pipe pipe, igt_output_t *output) +{ + igt_output_override_mode(output, &mode_2_lanes); + return set_mode_on_pipe(data, pipe, output); +} + +static void +find_outputs(data_t *data, igt_output_t **output1, igt_output_t **output2) +{ + int count = 0; + igt_output_t *output; + + *output1 = NULL; + *output2 = NULL; + + for_each_connected_output(&data->display, output) { + if (!(*output1)) + *output1 = output; + else if (!(*output2)) + *output2 = output; + + igt_output_set_pipe(output, PIPE_ANY); + count++; + } + + igt_skip_on_f(count < 2, "Not enough connected outputs\n"); +} + +static void +test_dpms(data_t *data) +{ + igt_output_t *output1, *output2; + int ret; + + find_outputs(data, &output1, &output2); + + igt_info("Pipe %s will use connector %s\n", + kmstest_pipe_name(PIPE_B), igt_output_name(output1)); + igt_info("Pipe %s will use connector %s\n", + kmstest_pipe_name(PIPE_C), igt_output_name(output2)); + + ret = set_big_mode_on_pipe(data, PIPE_B, output1); + igt_assert(ret == 0); + + kmstest_set_connector_dpms(data->drm_fd, output1->config.connector, DRM_MODE_DPMS_OFF); + + ret = set_big_mode_on_pipe(data, PIPE_C, output2); + igt_assert(ret != 0); +} + +static void +test_lane_reduction(data_t *data) +{ + igt_output_t *output1, *output2; + int ret; + + find_outputs(data, &output1, &output2); + + igt_info("Pipe %s will use connector %s\n", + kmstest_pipe_name(PIPE_B), igt_output_name(output1)); + igt_info("Pipe %s will use connector %s\n", + kmstest_pipe_name(PIPE_C), igt_output_name(output2)); + + ret = set_big_mode_on_pipe(data, PIPE_B, output1); + igt_assert(ret == 0); + + ret = set_normal_mode_on_pipe(data, PIPE_B, output1); + igt_assert(ret == 0); + + ret = set_normal_mode_on_pipe(data, PIPE_C, output2); + igt_assert(ret == 0); +} + +static void +test_disable_pipe_B(data_t *data) +{ + igt_output_t *output1, *output2; + int ret; + + find_outputs(data, &output1, &output2); + + igt_info("Pipe %s will use connector %s\n", + kmstest_pipe_name(PIPE_B), igt_output_name(output1)); + igt_info("Pipe %s will use connector %s\n", + kmstest_pipe_name(PIPE_C), igt_output_name(output2)); + + ret = set_big_mode_on_pipe(data, PIPE_B, output1); + igt_assert(ret == 0); + + ret = disable_pipe(data, PIPE_B, output1); + igt_assert(ret == 0); + + ret = set_normal_mode_on_pipe(data, PIPE_C, output2); + igt_assert(ret == 0); + + ret = set_normal_mode_on_pipe(data, PIPE_B, output1); + igt_assert(ret == 0); +} + +static void +test_from_C_to_B_with_3_lanes(data_t *data) +{ + igt_output_t *output1, *output2; + int ret; + + find_outputs(data, &output1, &output2); + + igt_info("Pipe %s will use connector %s\n", + kmstest_pipe_name(PIPE_B), igt_output_name(output1)); + igt_info("Pipe %s will use connector %s\n", + kmstest_pipe_name(PIPE_C), igt_output_name(output2)); + + ret = set_normal_mode_on_pipe(data, PIPE_C, output2); + igt_assert(ret == 0); + + ret = disable_pipe(data, PIPE_C, output2); + igt_assert(ret == 0); + + ret = set_big_mode_on_pipe(data, PIPE_B, output1); + igt_assert(ret == 0); +} + +static void +test_fail_enable_pipe_C_while_B_has_3_lanes(data_t *data) +{ + igt_output_t *output1, *output2; + int ret; + + find_outputs(data, &output1, &output2); + + igt_info("Pipe %s will use connector %s\n", + kmstest_pipe_name(PIPE_B), igt_output_name(output1)); + igt_info("Pipe %s will use connector %s\n", + kmstest_pipe_name(PIPE_C), igt_output_name(output2)); + + ret = set_big_mode_on_pipe(data, PIPE_B, output1); + igt_assert(ret == 0); + + ret = set_normal_mode_on_pipe(data, PIPE_C, output2); + igt_assert(ret != 0); +} + +static data_t data; +igt_main +{ + int devid; + + igt_skip_on_simulation(); + + igt_fixture { + data.drm_fd = drm_open_any_master(); + devid = intel_get_drm_devid(data.drm_fd); + + kmstest_set_vt_graphics_mode(); + igt_display_init(&data.display, data.drm_fd); + } + + igt_skip_on(!IS_IVYBRIDGE(devid)); + + igt_subtest("pipe-B-dpms-off-modeset-pipe-C") + test_dpms(&data); + + igt_subtest("pipe-B-double-modeset-then-modeset-pipe-C") + test_lane_reduction(&data); + + igt_subtest("disable-pipe-B-enable-pipe-C") + test_disable_pipe_B(&data); + + igt_subtest("from-pipe-C-to-B-with-3-lanes") + test_from_C_to_B_with_3_lanes(&data); + + igt_subtest("enable-pipe-C-while-B-has-3-lanes") + test_fail_enable_pipe_C_while_B_has_3_lanes(&data); + + igt_fixture { + igt_display_fini(&data.display); + } +}
The tests exercise different combinations of enabling pipe B with modes that require more than 2 lanes and then enabling pipe C. v2: Added a couple more tests for different pipe transitions. (Ander) Use custom modes to make the test reliable. (Daniel) --- tests/Makefile.sources | 1 + tests/kms_pipe_b_c_dpms.c | 286 ++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 287 insertions(+) create mode 100644 tests/kms_pipe_b_c_dpms.c