[19/21,v2] drm/i915: Enable skylake panel fitting using skylake shared scalers

Commit Message

Chandra Konduru March 21, 2015, 12:04 a.m. UTC

Modify skylake panel fitting implementation to use shared scalers.

v2:
-added log message in pfit enable/disable (me)
-read crtc scaler state from hw state (Daniel)
-replaced both skylake_pfit_enable and disable with skylake_pfit_update (me)
-added scaler id check to intel_pipe_config_compare (Daniel)

Signed-off-by: Chandra Konduru <[e-mail]>
---
 drivers/gpu/drm/i915/intel_display.c |   81 ++++++++++++++++++++++------------
 1 file changed, 54 insertions(+), 27 deletions(-)

Patch

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c393480..16dcd31 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4189,16 +4189,39 @@  static void cpt_verify_modeset(struct drm_device *dev, int pipe)
 	}
 }
 
-static void skylake_pfit_enable(struct intel_crtc *crtc)
+static void skylake_pfit_update(struct intel_crtc *crtc, int enable)
 {
 	struct drm_device *dev = crtc->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	int pipe = crtc->pipe;
+	struct intel_crtc_scaler_state *scaler_state =
+		&crtc->config->scaler_state;
+
+	DRM_DEBUG_KMS("for crtc_state = %p\n", crtc->config);
+
+	/* To update pfit, first update scaler state */
+	skl_update_scaler_users(crtc, crtc->config, NULL, NULL, !enable);
+	intel_atomic_setup_scalers(crtc->base.dev, crtc, crtc->config);
+	skl_detach_scaler(&crtc->base, NULL);
+	if (!enable)
+		return;
 
 	if (crtc->config->pch_pfit.enabled) {
-		I915_WRITE(PS_CTL(pipe), PS_ENABLE);
-		I915_WRITE(PS_WIN_POS(pipe), crtc->config->pch_pfit.pos);
-		I915_WRITE(PS_WIN_SZ(pipe), crtc->config->pch_pfit.size);
+		int id;
+
+		if (WARN_ON(crtc->config->scaler_state.scaler_id < 0)) {
+			DRM_ERROR("Requesting pfit without getting a scaler first\n");
+			return;
+		}
+
+		id = scaler_state->scaler_id;
+		I915_WRITE(SKL_PS_CTRL(pipe, id), PS_SCALER_EN |
+			scaler_state->scalers[id].mode |
+			scaler_state->scalers[id].filter);
+		I915_WRITE(SKL_PS_WIN_POS(pipe, id), crtc->config->pch_pfit.pos);
+		I915_WRITE(SKL_PS_WIN_SZ(pipe, id), crtc->config->pch_pfit.size);
+
+		DRM_DEBUG_KMS("for crtc_state = %p scaler_id = %d\n", crtc->config, id);
 	}
 }
 
@@ -4628,7 +4651,7 @@  static void haswell_crtc_enable(struct drm_crtc *crtc)
 	intel_ddi_enable_pipe_clock(intel_crtc);
 
 	if (IS_SKYLAKE(dev))
-		skylake_pfit_enable(intel_crtc);
+		skylake_pfit_update(intel_crtc, 1);
 	else
 		ironlake_pfit_enable(intel_crtc);
 
@@ -4664,21 +4687,6 @@  static void haswell_crtc_enable(struct drm_crtc *crtc)
 	intel_crtc_enable_planes(crtc);
 }
 
-static void skylake_pfit_disable(struct intel_crtc *crtc)
-{
-	struct drm_device *dev = crtc->base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	int pipe = crtc->pipe;
-
-	/* To avoid upsetting the power well on haswell only disable the pfit if
-	 * it's in use. The hw state code will make sure we get this right. */
-	if (crtc->config->pch_pfit.enabled) {
-		I915_WRITE(PS_CTL(pipe), 0);
-		I915_WRITE(PS_WIN_POS(pipe), 0);
-		I915_WRITE(PS_WIN_SZ(pipe), 0);
-	}
-}
-
 static void ironlake_pfit_disable(struct intel_crtc *crtc)
 {
 	struct drm_device *dev = crtc->base.dev;
@@ -4791,7 +4799,7 @@  static void haswell_crtc_disable(struct drm_crtc *crtc)
 	intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder);
 
 	if (IS_SKYLAKE(dev))
-		skylake_pfit_disable(intel_crtc);
+		skylake_pfit_update(intel_crtc, 0);
 	else
 		ironlake_pfit_disable(intel_crtc);
 
@@ -7955,14 +7963,28 @@  static void skylake_get_pfit_config(struct intel_crtc *crtc,
 {
 	struct drm_device *dev = crtc->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	uint32_t tmp;
+	struct intel_crtc_scaler_state *scaler_state = &pipe_config->scaler_state;
+	uint32_t ps_ctrl = 0;
+	int id = -1;
+	int i;
 
-	tmp = I915_READ(PS_CTL(crtc->pipe));
+	/* find scaler attached to this pipe */
+	for (i = 0; i < scaler_state->num_scalers; i++) {
+		ps_ctrl = I915_READ(SKL_PS_CTRL(crtc->pipe, i));
+		if (ps_ctrl & PS_SCALER_EN && !(ps_ctrl & PS_PLANE_SEL_MASK)) {
+			id = i;
+			pipe_config->pch_pfit.enabled = true;
+			pipe_config->pch_pfit.pos = I915_READ(SKL_PS_WIN_POS(crtc->pipe, i));
+			pipe_config->pch_pfit.size = I915_READ(SKL_PS_WIN_SZ(crtc->pipe, i));
+			break;
+		}
+	}
 
-	if (tmp & PS_ENABLE) {
-		pipe_config->pch_pfit.enabled = true;
-		pipe_config->pch_pfit.pos = I915_READ(PS_WIN_POS(crtc->pipe));
-		pipe_config->pch_pfit.size = I915_READ(PS_WIN_SZ(crtc->pipe));
+	scaler_state->scaler_id = id;
+	if (id >= 0) {
+		scaler_state->scaler_users |= (1 << SKL_CRTC_INDEX);
+	} else {
+		scaler_state->scaler_users &= ~(1 << SKL_CRTC_INDEX);
 	}
 }
 
@@ -8607,6 +8629,9 @@  static bool haswell_get_pipe_config(struct intel_crtc *crtc,
 			skylake_get_pfit_config(crtc, pipe_config);
 		else
 			ironlake_get_pfit_config(crtc, pipe_config);
+	} else {
+		pipe_config->scaler_state.scaler_id = -1;
+		pipe_config->scaler_state.scaler_users &= ~(1 << SKL_CRTC_INDEX);
 	}
 
 	if (IS_HASWELL(dev))
@@ -11112,6 +11137,8 @@  intel_pipe_config_compare(struct drm_device *dev,
 		PIPE_CONF_CHECK_I(pch_pfit.size);
 	}
 
+	PIPE_CONF_CHECK_I(scaler_state.scaler_id);
+
 	/* BDW+ don't expose a synchronous way to read the state */
 	if (IS_HASWELL(dev))
 		PIPE_CONF_CHECK_I(ips_enabled);