[20/21,v2] drm/i915: Enable skylake primary plane scaling using shared scalers

Commit Message

Chandra Konduru March 21, 2015, 12:04 a.m. UTC

This patch enables skylake primary plane display scaling using shared
scalers atomic desgin.

v2:
-use single copy of scaler limits (Matt)

Signed-off-by: Chandra Konduru <[e-mail]>
---
 drivers/gpu/drm/i915/intel_display.c |   77 +++++++++++++++++++++++++++++++---
 1 file changed, 71 insertions(+), 6 deletions(-)

Patch

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 16dcd31..965859f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2885,6 +2885,16 @@  static void skylake_update_primary_plane(struct drm_crtc *crtc,
 	struct drm_i915_gem_object *obj;
 	int pipe = intel_crtc->pipe;
 	u32 plane_ctl, stride_div;
+	struct intel_crtc_state *crtc_state = intel_crtc->config;
+	struct intel_plane_state *plane_state;
+	int src_x = 0, src_y = 0, src_w = 0, src_h = 0;
+	int dst_x = 0, dst_y = 0, dst_w = 0, dst_h = 0;
+	int scaler_id = -1;
+
+	plane_state = crtc->primary ?
+		to_intel_plane_state(crtc->primary->state) : NULL;
+
+	skl_detach_scaler(crtc, crtc->primary);
 
 	if (!intel_crtc->primary_enabled) {
 		I915_WRITE(PLANE_CTL(pipe, 0), 0);
@@ -2952,13 +2962,42 @@  static void skylake_update_primary_plane(struct drm_crtc *crtc,
 	stride_div = intel_fb_stride_alignment(dev, fb->modifier[0],
 					       fb->pixel_format);
 
+	if (plane_state) {
+		scaler_id = plane_state->scaler_id;
+		src_x = plane_state->src.x1 >> 16;
+		src_y = plane_state->src.y1 >> 16;
+		src_w = drm_rect_width(&plane_state->src) >> 16;
+		src_h = drm_rect_height(&plane_state->src) >> 16;
+		dst_x = plane_state->dst.x1;
+		dst_y = plane_state->dst.y1;
+		dst_w = drm_rect_width(&plane_state->dst);
+		dst_h = drm_rect_height(&plane_state->dst);
+	}
+
 	I915_WRITE(PLANE_CTL(pipe, 0), plane_ctl);
 
-	I915_WRITE(PLANE_POS(pipe, 0), 0);
+	if (src_w && src_h && dst_w && dst_h && scaler_id >= 0) {
+		uint32_t ps_ctrl = 0;
+
+		WARN_ON(x != src_x || y != src_y);
+		ps_ctrl = PS_SCALER_EN | PS_PLANE_SEL(0) |
+			crtc_state->scaler_state.scalers[scaler_id].mode |
+			crtc_state->scaler_state.scalers[scaler_id].filter;
+		I915_WRITE(SKL_PS_CTRL(pipe, scaler_id), ps_ctrl);
+		I915_WRITE(SKL_PS_PWR_GATE(pipe, scaler_id), 0);
+		I915_WRITE(SKL_PS_WIN_POS(pipe, scaler_id), (dst_x << 16) | dst_y);
+		I915_WRITE(SKL_PS_WIN_SZ(pipe, scaler_id), (dst_w << 16) | dst_h);
+
+		I915_WRITE(PLANE_POS(pipe, 0), 0);
+		I915_WRITE(PLANE_SIZE(pipe, 0), ((src_h - 1) << 16) | (src_w - 1));
+	} else {
+		I915_WRITE(PLANE_POS(pipe, 0), 0);
+		I915_WRITE(PLANE_SIZE(pipe, 0),
+			(intel_crtc->config->pipe_src_h - 1) << 16 |
+			(intel_crtc->config->pipe_src_w - 1));
+	}
+
 	I915_WRITE(PLANE_OFFSET(pipe, 0), (y << 16) | x);
-	I915_WRITE(PLANE_SIZE(pipe, 0),
-		   (intel_crtc->config->pipe_src_h - 1) << 16 |
-		   (intel_crtc->config->pipe_src_w - 1));
 	I915_WRITE(PLANE_STRIDE(pipe, 0), fb->pitches[0] / stride_div);
 	I915_WRITE(PLANE_SURF(pipe, 0), i915_gem_obj_ggtt_offset(obj));
 
@@ -12623,19 +12662,33 @@  intel_check_primary_plane(struct drm_plane *plane,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_crtc *crtc = state->base.crtc;
 	struct intel_crtc *intel_crtc;
+	struct intel_crtc_state *crtc_state;
 	struct drm_framebuffer *fb = state->base.fb;
 	struct drm_rect *dest = &state->dst;
 	struct drm_rect *src = &state->src;
 	const struct drm_rect *clip = &state->clip;
+	struct intel_crtc_scaler_state *scaler_state;
+	int max_scale = DRM_PLANE_HELPER_NO_SCALING;
+	int min_scale = DRM_PLANE_HELPER_NO_SCALING;
 	int ret;
 
 	crtc = crtc ? crtc : plane->crtc;
 	intel_crtc = to_intel_crtc(crtc);
+	crtc_state = state->base.state ?
+		intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL;
+	scaler_state = crtc_state ? &crtc_state->scaler_state : NULL;
+
+	if (INTEL_INFO(dev)->gen >= 9) {
+		if (scaler_state && scaler_state->num_scalers) {
+			min_scale = 1;
+			max_scale = (100 << 16) / scaler_state->min_hsr;
+		}
+	}
 
 	ret = drm_plane_helper_check_update(plane, crtc, fb,
 					    src, dest, clip,
-					    DRM_PLANE_HELPER_NO_SCALING,
-					    DRM_PLANE_HELPER_NO_SCALING,
+					    min_scale,
+					    max_scale,
 					    false, true, &state->visible);
 	if (ret)
 		return ret;
@@ -12682,6 +12735,13 @@  intel_check_primary_plane(struct drm_plane *plane,
 			intel_crtc->atomic.update_wm = true;
 	}
 
+	if (INTEL_INFO(dev)->gen >= 9) {
+		ret = skl_update_scaler_users(intel_crtc, crtc_state,
+			to_intel_plane(plane), state, 0);
+		if (ret)
+			return ret;
+	}
+
 	return 0;
 }
 
@@ -12865,6 +12925,11 @@  static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
 
 	primary->can_scale = false;
 	primary->max_downscale = 1;
+	if (INTEL_INFO(dev)->gen >= 9) {
+		primary->can_scale = true;
+		primary->max_downscale = 2; /* updated later */
+		primary->get_colorkey = skl_get_colorkey;
+	}
 	state->scaler_id = -1;
 	primary->pipe = pipe;
 	primary->plane = pipe;