diff mbox

[12/12] drm/i915: BDW clock change support

Message ID 1429170058-15158-13-git-send-email-mika.kahola@intel.com (mailing list archive)
State New, archived
Headers show

Commit Message

Mika Kahola April 16, 2015, 7:40 a.m. UTC
From: Ville Syrjälä <ville.syrjala@linux.intel.com>

Add support for changing cdclk frequency during runtime on BDW. The
procedure is quite a bit different on BDW from the one on HSW, so
add a separate function for it.

Also with IPS enabled the actual pixel rate mustn't exceed 95% of cdclk,
so take that into account when computing the max pixel rate.

v2: Grab rps.hw_lock around sandybridge_pcode_write()
v3: Rebase due to power well vs. .global_resources() reordering

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

v4: Rebased to the latest

Signed-off-by: Mika Kahola <mika.kahola@intel.com>

Author:    Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h      |   1 +
 drivers/gpu/drm/i915/intel_display.c | 138 ++++++++++++++++++++++++++++++-----
 2 files changed, 122 insertions(+), 17 deletions(-)

Comments

Shuang He April 16, 2015, 11:33 p.m. UTC | #1
Tested-By: Intel Graphics QA PRTS (Patch Regression Test System Contact: shuang.he@intel.com)
Task id: 6211
-------------------------------------Summary-------------------------------------
Platform          Delta          drm-intel-nightly          Series Applied
PNV                                  276/276              276/276
ILK                                  302/302              302/302
SNB                                  318/318              318/318
IVB                                  341/341              341/341
BYT                                  287/287              287/287
HSW                                  395/395              395/395
BDW                                  318/318              318/318
-------------------------------------Detailed-------------------------------------
Platform  Test                                drm-intel-nightly          Series Applied
Note: You need to pay more attention to line start with '*'
diff mbox

Patch

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 74ff995..782d471 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6411,6 +6411,7 @@  enum skl_disp_power_wells {
 #define   GEN6_ENCODE_RC6_VID(mv)		(((mv) - 245) / 5)
 #define   GEN6_DECODE_RC6_VID(vids)		(((vids) * 5) + 245)
 #define   HSW_PCODE_DE_WRITE_FREQ_REQ		0x17
+#define   BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ	0x18
 #define   DISPLAY_IPS_CONTROL			0x19
 #define	  HSW_PCODE_DYNAMIC_DUTY_CYCLE_CONTROL	0x1A
 #define GEN6_PCODE_DATA				0x138128
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 35489cd..09f3518 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5214,7 +5214,22 @@  static void intel_update_max_cdclk(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	if (IS_HASWELL(dev)) {
+	if (IS_BROADWELL(dev))  {
+		/*
+		 * FIXME with extra cooling we can allow
+		 * 540 MHz for ULX and 675 Mhz for ULT.
+		 * How can we know if extra cooling is
+		 * available? PCI ID, VTB, something else?
+		 */
+		if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
+			dev_priv->max_cdclk_freq = 450000;
+		else if (IS_BDW_ULX(dev))
+			dev_priv->max_cdclk_freq = 450000;
+		else if (IS_BDW_ULT(dev))
+			dev_priv->max_cdclk_freq = 540000;
+		else
+			dev_priv->max_cdclk_freq = 675000;
+	} else if (IS_HASWELL(dev)) {
 		if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
 			dev_priv->max_cdclk_freq = 450000;
 		else if (IS_HSW_ULX(dev))
@@ -6092,13 +6107,11 @@  static bool pipe_config_supports_ips(struct drm_i915_private *dev_priv,
 		return true;
 
 	/*
-	 * FIXME if we compare against max we should then
-	 * increase the cdclk frequency when the current
-	 * value is too low. The other option is to compare
-	 * against the cdclk frequency we're going have post
-	 * modeset (ie. one we computed using other constraints).
-	 * Need to measure whether using a lower cdclk w/o IPS
-	 * is better or worse than a higher cdclk w/ IPS.
+	 * We compare against max which means we must take
+	 * the increased cdclk requirement into account when
+	 * calculating the new cdclk.
+	 *
+	 * Should measure whether using a lower cdclk w/o IPS
 	 */
 	return ilk_pipe_pixel_rate(pipe_config) <=
 		dev_priv->max_cdclk_freq * 95 / 100;
@@ -9082,9 +9095,18 @@  static int ilk_max_pixel_rate(struct drm_i915_private *dev_priv)
 	int max_pixel_rate = 0;
 
 	for_each_intel_crtc(dev, crtc) {
-		if (crtc->new_enabled)
-			max_pixel_rate = max((int)max_pixel_rate,
-					     (int)ilk_pipe_pixel_rate(crtc->config));
+		int pixel_rate;
+
+		if (!crtc->new_enabled)
+			continue;
+
+		pixel_rate = ilk_pipe_pixel_rate(crtc->config);
+
+		/* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
+		if (IS_BROADWELL(dev) && crtc->config->ips_enabled)
+			pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95);
+
+		max_pixel_rate = max(max_pixel_rate, pixel_rate);
 	}
 
 	return max_pixel_rate;
@@ -9099,7 +9121,9 @@  static int haswell_calc_cdclk(struct drm_i915_private *dev_priv,
 	 * FIXME should also account for plane ratio
 	 * once 64bpp pixel formats are supported.
 	 */
-	if (max_pixel_rate > 450000)
+	if (max_pixel_rate > 540000)
+		cdclk = 675000;
+	else if (max_pixel_rate > 450000)
 		cdclk = 540000;
 	else if (max_pixel_rate > 337500 || !IS_HSW_ULX(dev_priv))
 		cdclk = 450000;
@@ -9164,6 +9188,83 @@  static void haswell_set_cdclk(struct drm_device *dev, int cdclk)
 	     cdclk, dev_priv->cdclk_freq);
 }
 
+static void broadwell_set_cdclk(struct drm_device *dev, int cdclk)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t val, data;
+	int ret;
+
+	if (WARN((I915_READ(LCPLL_CTL) &
+		  (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
+		   LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
+		   LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
+		   LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
+		 "trying to change cdclk frequency with cdclk not enabled\n"))
+		return;
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+	ret = sandybridge_pcode_write(dev_priv,
+				      BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
+	mutex_unlock(&dev_priv->rps.hw_lock);
+	if (ret) {
+		DRM_ERROR("failed to inform pcode about cdclk change\n");
+		return;
+	}
+
+	val = I915_READ(LCPLL_CTL);
+	val |= LCPLL_CD_SOURCE_FCLK;
+	I915_WRITE(LCPLL_CTL, val);
+
+	if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
+			       LCPLL_CD_SOURCE_FCLK_DONE, 1))
+		DRM_ERROR("Switching to FCLK failed\n");
+
+	val = I915_READ(LCPLL_CTL);
+	val &= ~LCPLL_CLK_FREQ_MASK;
+
+	switch (cdclk) {
+	case 450000:
+		val |= LCPLL_CLK_FREQ_450;
+		data = 0;
+		break;
+	case 540000:
+		val |= LCPLL_CLK_FREQ_54O_BDW;
+		data = 1;
+		break;
+	case 337500:
+		val |= LCPLL_CLK_FREQ_337_5_BDW;
+		data = 2;
+		break;
+	case 675000:
+		val |= LCPLL_CLK_FREQ_675_BDW;
+		data = 3;
+		break;
+	default:
+		WARN(1, "invalid cdclk frequency\n");
+		return;
+	}
+
+	I915_WRITE(LCPLL_CTL, val);
+
+	val = I915_READ(LCPLL_CTL);
+	val &= ~LCPLL_CD_SOURCE_FCLK;
+	I915_WRITE(LCPLL_CTL, val);
+
+	if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
+				LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
+		DRM_ERROR("Switching back to LCPLL failed\n");
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+	sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, data);
+	mutex_unlock(&dev_priv->rps.hw_lock);
+
+	intel_update_cdclk(dev);
+
+	WARN(cdclk != dev_priv->cdclk_freq,
+	     "cdclk requested %d kHz but got %d kHz\n",
+	     cdclk, dev_priv->cdclk_freq);
+}
+
 static void haswell_modeset_global_pipes(struct drm_atomic_state *state,
 					 unsigned *prepare_pipes)
 {
@@ -9189,7 +9290,10 @@  static void haswell_modeset_global_resources(struct drm_atomic_state *state)
 	int req_cdclk = haswell_calc_cdclk(dev_priv, max_pixel_rate);
 
 	if (req_cdclk != dev_priv->cdclk_freq) {
-		haswell_set_cdclk(dev, req_cdclk);
+		if (IS_BROADWELL(dev))
+			broadwell_set_cdclk(dev, req_cdclk);
+		else
+			haswell_set_cdclk(dev, req_cdclk);
 	}
 }
 
@@ -12349,7 +12453,7 @@  static int __intel_set_mode(struct drm_crtc *crtc,
 	 * mode set on this crtc.  For other crtcs we need to use the
 	 * adjusted_mode bits in the crtc directly.
 	 */
-	if (IS_VALLEYVIEW(dev) || IS_HASWELL(dev)) {
+	if (IS_VALLEYVIEW(dev) || IS_HASWELL(dev) || IS_BROADWELL(dev)) {
 		if (IS_VALLEYVIEW(dev))
 			valleyview_modeset_global_pipes(state, &prepare_pipes);
 		else
@@ -14387,9 +14491,9 @@  static void intel_init_display(struct drm_device *dev)
 		dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
 	} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
 		dev_priv->display.fdi_link_train = hsw_fdi_link_train;
-		if (IS_HASWELL(dev))
-			dev_priv->display.modeset_global_resources =
-				haswell_modeset_global_resources;
+		dev_priv->display.modeset_global_resources =
+			haswell_modeset_global_resources;
+
 	} else if (IS_VALLEYVIEW(dev)) {
 		dev_priv->display.modeset_global_resources =
 			valleyview_modeset_global_resources;