@@ -1041,13 +1041,15 @@ static bool drm_edid_is_zero(const u8 *in_edid, int length)
* @raw_edid: pointer to raw EDID block
* @block: type of block to validate (0 for base, extension otherwise)
* @print_bad_edid: if true, dump bad EDID blocks to the console
+ * @edid_corrupt: if true, the header or checksum is invalid
*
* Validate a base or extension EDID block and optionally dump bad blocks to
* the console.
*
* Return: True if the block is valid, false otherwise.
*/
-bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid)
+bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid,
+ bool *edid_corrupt)
{
u8 csum;
struct edid *edid = (struct edid *)raw_edid;
@@ -1060,11 +1062,23 @@ bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid)
if (block == 0) {
int score = drm_edid_header_is_valid(raw_edid);
- if (score == 8) ;
- else if (score >= edid_fixup) {
+ if (score == 8) {
+ if (edid_corrupt)
+ *edid_corrupt = 0;
+ } else if (score >= edid_fixup) {
+ /* Displayport Link CTS Core 1.2 rev1.1 test 4.2.2.6
+ * The corrupt flag needs to be set here otherwise, the
+ * fix-up code here will correct the problem, the
+ * checksum is correct and the test fails
+ */
+ if (edid_corrupt)
+ *edid_corrupt = 1;
DRM_DEBUG("Fixing EDID header, your hardware may be failing\n");
memcpy(raw_edid, edid_header, sizeof(edid_header));
} else {
+ if (edid_corrupt) {
+ *edid_corrupt = 1;
+ }
goto bad;
}
}
@@ -1129,7 +1143,7 @@ bool drm_edid_is_valid(struct edid *edid)
return false;
for (i = 0; i <= edid->extensions; i++)
- if (!drm_edid_block_valid(raw + i * EDID_LENGTH, i, true))
+ if (!drm_edid_block_valid(raw + i * EDID_LENGTH, i, true, NULL))
return false;
return true;
@@ -1232,7 +1246,8 @@ struct edid *drm_do_get_edid(struct drm_connector *connector,
for (i = 0; i < 4; i++) {
if (get_edid_block(data, block, 0, EDID_LENGTH))
goto out;
- if (drm_edid_block_valid(block, 0, print_bad_edid))
+ if (drm_edid_block_valid(block, 0, print_bad_edid,
+ &connector->edid_corrupt))
break;
if (i == 0 && drm_edid_is_zero(block, EDID_LENGTH)) {
connector->null_edid_counter++;
@@ -1257,7 +1272,10 @@ struct edid *drm_do_get_edid(struct drm_connector *connector,
block + (valid_extensions + 1) * EDID_LENGTH,
j, EDID_LENGTH))
goto out;
- if (drm_edid_block_valid(block + (valid_extensions + 1) * EDID_LENGTH, j, print_bad_edid)) {
+ if (drm_edid_block_valid(block + (valid_extensions + 1)
+ * EDID_LENGTH, j,
+ print_bad_edid,
+ NULL)) {
valid_extensions++;
break;
}
@@ -216,7 +216,8 @@ static void *edid_load(struct drm_connector *connector, const char *name,
goto out;
}
- if (!drm_edid_block_valid(edid, 0, print_bad_edid)) {
+ if (!drm_edid_block_valid(edid, 0, print_bad_edid,
+ &connector->edid_corrupt)) {
connector->bad_edid_counter++;
DRM_ERROR("Base block of EDID firmware \"%s\" is invalid ",
name);
@@ -229,7 +230,9 @@ static void *edid_load(struct drm_connector *connector, const char *name,
if (i != valid_extensions + 1)
memcpy(edid + (valid_extensions + 1) * EDID_LENGTH,
edid + i * EDID_LENGTH, EDID_LENGTH);
- if (drm_edid_block_valid(edid + i * EDID_LENGTH, i, print_bad_edid))
+ if (drm_edid_block_valid(edid + i * EDID_LENGTH, i,
+ print_bad_edid,
+ NULL))
valid_extensions++;
}
@@ -4139,7 +4139,7 @@ intel_dp_check_link_status(struct intel_dp *intel_dp, bool long_hpd)
*/
if (long_hpd) {
edid_read = drm_get_edid(connector, adapter);
- if (!edid_read) {
+ if (!edid_read || connector->edid_corrupt == 1) {
DRM_DEBUG_DRIVER("Invalid EDID detected\n");
} else {
kfree(edid_read);
@@ -719,6 +719,11 @@ struct drm_connector {
int null_edid_counter; /* needed to workaround some HW bugs where we get all 0s */
unsigned bad_edid_counter;
+ /* Flag for raw EDID header corruption - used in Displayport
+ * compliance testing - * Displayport Link CTS Core 1.2 rev1.1 4.2.2.6
+ */
+ bool edid_corrupt;
+
struct dentry *debugfs_entry;
struct drm_connector_state *state;
@@ -1443,7 +1448,8 @@ extern void drm_set_preferred_mode(struct drm_connector *connector,
int hpref, int vpref);
extern int drm_edid_header_is_valid(const u8 *raw_edid);
-extern bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid);
+extern bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid,
+ bool *edid_corrupt);
extern bool drm_edid_is_valid(struct edid *edid);
extern struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev,
Displayport compliance test 4.2.2.6 requires that a source device be capable of detecting a corrupt EDID. The test specification states that the sink device sets up the EDID with an invalid checksum. To do this, the sink sets up an invalid EDID header, expecting the source device to generate the checksum and compare it to the value stored in the last byte of the block data. Unfortunately, the DRM EDID reading and parsing functions are actually too good in this case; the header is fixed before the checksum is computed and thus the test never sees the invalid checksum. This results in a failure to pass the compliance test. To correct this issue, when the EDID code detects that the header is invalid, a flag is set to indicate that the EDID is corrupted. In this case, it sets edid_corrupt flag and continues with its fix-up code. In the case of a more seriously damaged header (fixup score less than the threshold) the code does not generate the checksum but does set the edid_corrupt flag. V2: - Removed the static bool global - Added a bool to the drm_connector struct to reaplce the static one for holding the status of raw edid header corruption detection - Modified the function signature of the is_valid function to take an additional parameter to store the corruption detected value - Fixed the other callers of the above is_valid function V3: - Updated the commit message to be more clear about what and why this patch does what it does. - Added comment in code to clarify the operations there - Removed compliance variable and check_link_status update; those have been moved to a later patch - Removed variable assignment from the bottom of the test handler V4: - Removed i915 tag from subject line as the patch is not i915-specific V5: - Moved code causing a compilation error to this patch where the variable is actually declared - Maintained blank lines / spacing so as to not contaminate the patch V6: - Removed extra debug messages - Added documentation to for the added parameter on drm_edid_block_valid - Fixed more whitespace issues in check_link_status - Added a clear of the header_corrupt flag to the end of the test handler in intel_dp.c - Changed the usage of the new function prototype in several places to use NULL where it is not needed by compliance testing V7: - Updated to account for long_pulse flag propagation V8: - Removed clearing of header_corrupt flag from the test handler in intel_dp.c - Added clearing of header_corrupt flag in the drm_edid_block_valid function V9: - Renamed header_corrupt flag to edid_corrupt to more accurately reflect its value and purpose - Updated commit message Signed-off-by: Todd Previte <tprevite@gmail.com> Cc: dri-devel@lists.freedesktop.org --- drivers/gpu/drm/drm_edid.c | 30 ++++++++++++++++++++++++------ drivers/gpu/drm/drm_edid_load.c | 7 +++++-- drivers/gpu/drm/i915/intel_dp.c | 2 +- include/drm/drm_crtc.h | 8 +++++++- 4 files changed, 37 insertions(+), 10 deletions(-)