new file mode 100644
@@ -0,0 +1,102 @@
+/*
+ * Copyright © 2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+#ifndef _I915_GUC_REG_H_
+#define _I915_GUC_REG_H_
+
+/* Definitions of GuC H/W registers, bits, etc */
+
+#define GUC_STATUS 0xc000
+#define GS_BOOTROM_SHIFT 1
+#define GS_BOOTROM_MASK (0x7F << GS_BOOTROM_SHIFT)
+#define GS_BOOTROM_RSA_FAILED (0x50 << GS_BOOTROM_SHIFT)
+#define GS_UKERNEL_SHIFT 8
+#define GS_UKERNEL_MASK (0xFF << GS_UKERNEL_SHIFT)
+#define GS_UKERNEL_LAPIC_DONE (0x30 << GS_UKERNEL_SHIFT)
+#define GS_UKERNEL_DPC_ERROR (0x60 << GS_UKERNEL_SHIFT)
+#define GS_UKERNEL_READY (0xF0 << GS_UKERNEL_SHIFT)
+#define GS_MIA_SHIFT 16
+#define GS_MIA_MASK (0x07 << GS_MIA_SHIFT)
+
+#define GUC_WOPCM_SIZE 0xc050
+#define GUC_WOPCM_SIZE_VALUE (0x80 << 12) /* 512KB */
+#define GUC_WOPCM_OFFSET 0x80000 /* 512KB */
+
+#define SOFT_SCRATCH(n) (0xc180 + ((n) * 4))
+
+#define UOS_RSA_SCRATCH_0 0xc200
+#define DMA_ADDR_0_LOW 0xc300
+#define DMA_ADDR_0_HIGH 0xc304
+#define DMA_ADDR_1_LOW 0xc308
+#define DMA_ADDR_1_HIGH 0xc30c
+#define DMA_ADDRESS_SPACE_WOPCM (7 << 16)
+#define DMA_ADDRESS_SPACE_GTT (8 << 16)
+#define DMA_COPY_SIZE 0xc310
+#define DMA_CTRL 0xc314
+#define UOS_MOVE (1<<4)
+#define START_DMA (1<<0)
+#define DMA_GUC_WOPCM_OFFSET 0xc340
+
+#define GEN8_GT_PM_CONFIG 0x138140
+#define GEN9_GT_PM_CONFIG 0x13816c
+#define GEN8_GT_DOORBELL_ENABLE (1<<0)
+
+#define GEN8_GTCR 0x4274
+#define GEN8_GTCR_INVALIDATE (1<<0)
+
+#define GUC_ARAT_C6DIS 0xA178
+
+#define GUC_SHIM_CONTROL 0xc064
+#define GUC_DISABLE_SRAM_INIT_TO_ZEROES (1<<0)
+#define GUC_ENABLE_READ_CACHE_LOGIC (1<<1)
+#define GUC_ENABLE_MIA_CACHING (1<<2)
+#define GUC_GEN10_MSGCH_ENABLE (1<<4)
+#define GUC_ENABLE_READ_CACHE_FOR_SRAM_DATA (1<<9)
+#define GUC_ENABLE_READ_CACHE_FOR_WOPCM_DATA (1<<10)
+#define GUC_ENABLE_MIA_CLOCK_GATING (1<<15)
+#define GUC_GEN10_SHIM_WC_ENABLE (1<<21)
+
+#define GUC_SHIM_CONTROL_VALUE (GUC_DISABLE_SRAM_INIT_TO_ZEROES | \
+ GUC_ENABLE_READ_CACHE_LOGIC | \
+ GUC_ENABLE_MIA_CACHING | \
+ GUC_ENABLE_READ_CACHE_FOR_SRAM_DATA | \
+ GUC_ENABLE_READ_CACHE_FOR_WOPCM_DATA)
+
+#define HOST2GUC_INTERRUPT 0xc4c8
+#define HOST2GUC_TRIGGER (1<<0)
+
+#define DRBMISC1 0x1984
+#define DOORBELL_ENABLE (1<<0)
+
+#define GEN8_DRBREGL(x) (0x1000 + (x) * 8)
+#define GEN8_DRB_VALID (1<<0)
+#define GEN8_DRBREGU(x) (GEN8_DRBREGL(x) + 4)
+
+#define DE_GUCRMR 0x44054
+
+#define GUC_BCS_RCS_IER 0xC550
+#define GUC_VCS2_VCS1_IER 0xC554
+#define GUC_WD_VECS_IER 0xC558
+#define GUC_PM_P24C_IER 0xC55C
+
+#endif
new file mode 100644
@@ -0,0 +1,236 @@
+/*
+ * Copyright © 2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+#ifndef _INTEL_GUC_FWIF_H
+#define _INTEL_GUC_FWIF_H
+
+#define GFXCORE_FAMILY_GEN8 11
+#define GFXCORE_FAMILY_GEN9 12
+#define GFXCORE_FAMILY_FORCE_ULONG 0x7fffffff
+
+#define GUC_CTX_PRIORITY_CRITICAL 0
+#define GUC_CTX_PRIORITY_HIGH 1
+#define GUC_CTX_PRIORITY_NORMAL 2
+#define GUC_CTX_PRIORITY_LOW 3
+
+#define GUC_MAX_GPU_CONTEXTS 1024
+#define GUC_INVALID_CTX_ID (GUC_MAX_GPU_CONTEXTS + 1)
+
+/* Work queue item header definitions */
+#define WQ_STATUS_ACTIVE 1
+#define WQ_STATUS_SUSPENDED 2
+#define WQ_STATUS_CMD_ERROR 3
+#define WQ_STATUS_ENGINE_ID_NOT_USED 4
+#define WQ_STATUS_SUSPENDED_FROM_RESET 5
+#define WQ_TYPE_SHIFT 0
+#define WQ_TYPE_BATCH_BUF (0x1 << WQ_TYPE_SHIFT)
+#define WQ_TYPE_PSEUDO (0x2 << WQ_TYPE_SHIFT)
+#define WQ_TYPE_INORDER (0x3 << WQ_TYPE_SHIFT)
+#define WQ_TARGET_SHIFT 10
+#define WQ_LEN_SHIFT 16
+#define WQ_NO_WCFLUSH_WAIT (1 << 27)
+#define WQ_PRESENT_WORKLOAD (1 << 28)
+#define WQ_WORKLOAD_SHIFT 29
+#define WQ_WORKLOAD_GENERAL (0 << WQ_WORKLOAD_SHIFT)
+#define WQ_WORKLOAD_GPGPU (1 << WQ_WORKLOAD_SHIFT)
+#define WQ_WORKLOAD_TOUCH (2 << WQ_WORKLOAD_SHIFT)
+
+#define WQ_RING_TAIL_SHIFT 20
+#define WQ_RING_TAIL_MASK (0x7FF << WQ_RING_TAIL_SHIFT)
+
+#define GUC_DOORBELL_ENABLED 1
+#define GUC_DOORBELL_DISABLED 0
+
+#define GUC_CTX_DESC_ATTR_ACTIVE (1 << 0)
+#define GUC_CTX_DESC_ATTR_PENDING_DB (1 << 1)
+#define GUC_CTX_DESC_ATTR_KERNEL (1 << 2)
+#define GUC_CTX_DESC_ATTR_PREEMPT (1 << 3)
+#define GUC_CTX_DESC_ATTR_RESET (1 << 4)
+#define GUC_CTX_DESC_ATTR_WQLOCKED (1 << 5)
+#define GUC_CTX_DESC_ATTR_PCH (1 << 6)
+
+/* The guc control data is 10 DWORDs */
+#define GUC_CTL_CTXINFO 0
+#define GUC_CTL_CTXNUM_IN16_SHIFT 0
+#define GUC_CTL_BASE_ADDR_SHIFT 12
+#define GUC_CTL_ARAT_HIGH 1
+#define GUC_CTL_ARAT_LOW 2
+#define GUC_CTL_DEVICE_INFO 3
+#define GUC_CTL_GTTYPE_SHIFT 0
+#define GUC_CTL_COREFAMILY_SHIFT 7
+#define GUC_CTL_LOG_PARAMS 4
+#define GUC_LOG_VALID (1 << 0)
+#define GUC_LOG_NOTIFY_ON_HALF_FULL (1 << 1)
+#define GUC_LOG_ALLOC_IN_MEGABYTE (1 << 3)
+#define GUC_LOG_CRASH_PAGES 1
+#define GUC_LOG_CRASH_SHIFT 4
+#define GUC_LOG_DPC_PAGES 3
+#define GUC_LOG_DPC_SHIFT 6
+#define GUC_LOG_ISR_PAGES 3
+#define GUC_LOG_ISR_SHIFT 9
+#define GUC_LOG_BUF_ADDR_SHIFT 12
+#define GUC_CTL_PAGE_FAULT_CONTROL 5
+#define GUC_CTL_WA 6
+#define GUC_CTL_WA_UK_BY_DRIVER (1 << 3)
+#define GUC_CTL_FEATURE 7
+#define GUC_CTL_VCS2_ENABLED (1 << 0)
+#define GUC_CTL_KERNEL_SUBMISSIONS (1 << 1)
+#define GUC_CTL_FEATURE2 (1 << 2)
+#define GUC_CTL_POWER_GATING (1 << 3)
+#define GUC_CTL_DISABLE_SCHEDULER (1 << 4)
+#define GUC_CTL_PREEMPTION_LOG (1 << 5)
+#define GUC_CTL_ENABLE_SLPC (1 << 7)
+#define GUC_CTL_DEBUG 8
+#define GUC_LOG_VERBOSITY_SHIFT 0
+#define GUC_LOG_VERBOSITY_LOW (0 << GUC_LOG_VERBOSITY_SHIFT)
+#define GUC_LOG_VERBOSITY_MED (1 << GUC_LOG_VERBOSITY_SHIFT)
+#define GUC_LOG_VERBOSITY_HIGH (2 << GUC_LOG_VERBOSITY_SHIFT)
+#define GUC_LOG_VERBOSITY_ULTRA (3 << GUC_LOG_VERBOSITY_SHIFT)
+/* Verbosity range-check limits, without the shift */
+#define GUC_LOG_VERBOSITY_MIN 0
+#define GUC_LOG_VERBOSITY_MAX 3
+
+#define GUC_CTL_MAX_DWORDS (GUC_CTL_DEBUG + 1)
+
+struct guc_doorbell_info {
+ u32 db_status;
+ u32 cookie;
+ u32 reserved[14];
+} __packed;
+
+union guc_doorbell_qw {
+ struct {
+ u32 db_status;
+ u32 cookie;
+ };
+ u64 value_qw;
+} __packed;
+
+#define GUC_MAX_DOORBELLS 256
+#define GUC_INVALID_DOORBELL_ID (GUC_MAX_DOORBELLS)
+
+#define GUC_DB_SIZE (PAGE_SIZE)
+#define GUC_WQ_SIZE (PAGE_SIZE * 2)
+
+/* Work item for submitting workloads into work queue of GuC. */
+struct guc_wq_item {
+ u32 header;
+ u32 context_desc;
+ u32 ring_tail;
+ u32 fence_id;
+} __packed;
+
+struct guc_process_desc {
+ u32 context_id;
+ u64 db_base_addr;
+ u32 head;
+ u32 tail;
+ u32 error_offset;
+ u64 wq_base_addr;
+ u32 wq_size_bytes;
+ u32 wq_status;
+ u32 engine_presence;
+ u32 priority;
+ u32 reserved[30];
+} __packed;
+
+/* engine id and context id is packed into guc_execlist_context.context_id*/
+#define GUC_ELC_CTXID_OFFSET 0
+#define GUC_ELC_ENGINE_OFFSET 29
+
+/* The execlist context including software and HW information */
+struct guc_execlist_context {
+ u32 context_desc;
+ u32 context_id;
+ u32 ring_status;
+ u32 ring_lcra;
+ u32 ring_begin;
+ u32 ring_end;
+ u32 ring_next_free_location;
+ u32 ring_current_tail_pointer_value;
+ u8 engine_state_submit_value;
+ u8 engine_state_wait_value;
+ u16 pagefault_count;
+ u16 engine_submit_queue_count;
+} __packed;
+
+/*Context descriptor for communicating between uKernel and Driver*/
+struct guc_context_desc {
+ u32 sched_common_area;
+ u32 context_id;
+ u32 pas_id;
+ u8 engines_used;
+ u64 db_trigger_cpu;
+ u32 db_trigger_uk;
+ u64 db_trigger_phy;
+ u16 db_id;
+
+ struct guc_execlist_context lrc[I915_NUM_RINGS];
+
+ u8 attribute;
+
+ u32 priority;
+
+ u32 wq_sampled_tail_offset;
+ u32 wq_total_submit_enqueues;
+
+ u32 process_desc;
+ u32 wq_addr;
+ u32 wq_size;
+
+ u32 engine_presence;
+
+ u32 reserved0[1];
+ u64 reserved1[1];
+
+ u64 desc_private;
+} __packed;
+
+/* This Action will be programmed in C180 - SOFT_SCRATCH_O_REG */
+enum host2guc_action {
+ HOST2GUC_ACTION_DEFAULT = 0x0,
+ HOST2GUC_ACTION_SAMPLE_FORCEWAKE = 0x6,
+ HOST2GUC_ACTION_ALLOCATE_DOORBELL = 0x10,
+ HOST2GUC_ACTION_DEALLOCATE_DOORBELL = 0x20,
+ HOST2GUC_ACTION_SLPC_REQUEST = 0x3003,
+ HOST2GUC_ACTION_LIMIT
+};
+
+/*
+ * The GuC sends its response to a command by overwriting the
+ * command in SS0. The response is distinguishable from a command
+ * by the fact that all the MASK bits are set. The remaining bits
+ * give more detail.
+ */
+#define GUC2HOST_RESPONSE_MASK ((u32)0xF0000000)
+#define GUC2HOST_IS_RESPONSE(x) ((u32)(x) >= GUC2HOST_RESPONSE_MASK)
+#define GUC2HOST_STATUS(x) (GUC2HOST_RESPONSE_MASK | (x))
+
+/* GUC will return status back to SOFT_SCRATCH_O_REG */
+enum guc2host_status {
+ GUC2HOST_STATUS_SUCCESS = GUC2HOST_STATUS(0x0),
+ GUC2HOST_STATUS_ALLOCATE_DOORBELL_FAIL = GUC2HOST_STATUS(0x10),
+ GUC2HOST_STATUS_DEALLOCATE_DOORBELL_FAIL = GUC2HOST_STATUS(0x20),
+ GUC2HOST_STATUS_GENERIC_FAIL = GUC2HOST_STATUS(0x0000F000)
+};
+
+#endif
intel_guc_fwif.h contains the subset of the GuC interface that we will need for submission of commands through the GuC. These MUST be kept in sync with the definitions used by the GuC firmware, and updates to this file will (or should) be autogenerated from the source files used to build the firmware. Editing this file is therefore not recommended. i915_guc_reg.h contains definitions of GuC-related hardware: registers, bitmasks, etc. These should match the BSpec. v2: Files renamed & resliced per review comments by Chris Wilson Issue: VIZ-4884 Signed-off-by: Alex Dai <yu.dai@intel.com> Signed-off-by: Dave Gordon <david.s.gordon@intel.com> --- drivers/gpu/drm/i915/i915_guc_reg.h | 102 ++++++++++++++ drivers/gpu/drm/i915/intel_guc_fwif.h | 236 +++++++++++++++++++++++++++++++++ 2 files changed, 338 insertions(+) create mode 100644 drivers/gpu/drm/i915/i915_guc_reg.h create mode 100644 drivers/gpu/drm/i915/intel_guc_fwif.h