@@ -17,6 +17,8 @@ DOCBOOKS := z8530book.xml device-drivers.xml \
tracepoint.xml drm.xml media_api.xml w1.xml \
writing_musb_glue_layer.xml crypto-API.xml
+MARKDOWNREADY :=
+
include Documentation/DocBook/media/Makefile
###
@@ -79,18 +81,23 @@ XMLTOFLAGS += --skip-validation
# The following rules are used to generate the .xml documentation
# required to generate the final targets. (ps, pdf, html).
quiet_cmd_docproc = DOCPROC $@
- cmd_docproc = SRCTREE=$(srctree)/ $(DOCPROC) doc $< >$@
+ cmd_docproc = SRCTREE=$(srctree)/ $(DOCPROC) doc $<
define rule_docproc
- set -e; \
- $(if $($(quiet)cmd_$(1)),echo ' $($(quiet)cmd_$(1))';) \
- $(cmd_$(1)); \
- ( \
- echo 'cmd_$@ := $(cmd_$(1))'; \
- echo $@: `SRCTREE=$(srctree) $(DOCPROC) depend $<`; \
+ set -e; \
+ USEMARKDOWN=""; \
+ FILE=`basename $@`; \
+ [[ "$(MARKDOWNREADY)" =~ "$${FILE}" ]] && USEMARKDOWN="-use-markdown"; \
+ $(if $($(quiet)cmd_$(1)),echo ' $($(quiet)cmd_$(1))';) \
+ $(cmd_$(1)) $$USEMARKDOWN >$@; \
+ ( \
+ echo 'cmd_$@ := $(cmd_$(1))'; \
+ echo $@: `SRCTREE=$(srctree) $(DOCPROC) depend $<`; \
) > $(dir $@).$(notdir $@).cmd
endef
%.xml: %.tmpl $(KERNELDOC) $(DOCPROC) $(KERNELDOCXMLREF) FORCE
+ @(which pandoc > /dev/null 2>&1) || \
+ (echo "*** To get propper documentation you need to install pandoc ***";)
$(call if_changed_rule,docproc)
# Tell kbuild to always build the programs
@@ -101,6 +108,10 @@ notfoundtemplate = echo "*** You have to install docbook-utils or xmlto ***"; \
db2xtemplate = db2TYPE -o $(dir $@) $<
xmltotemplate = xmlto TYPE $(XMLTOFLAGS) -o $(dir $@) $<
+ifneq ($(shell which pandoc >/dev/null 2>&1 && echo found),found)
+ MARKDOWNREADY := "";
+endif
+
# determine which methods are available
ifeq ($(shell which db2ps >/dev/null 2>&1 && echo found),found)
use-db2x = db2x
@@ -73,12 +73,15 @@ FILELINE * docsection;
#define NOFUNCTION "-nofunction"
#define NODOCSECTIONS "-no-doc-sections"
#define SHOWNOTFOUND "-show-not-found"
+#define USEMARKDOWN "-use-markdown"
static char *srctree, *kernsrctree;
static char **all_list = NULL;
static int all_list_len = 0;
+static int use_markdown = 0;
+
static void consume_symbol(const char *sym)
{
int i;
@@ -95,10 +98,11 @@ static void consume_symbol(const char *sym)
static void usage (void)
{
- fprintf(stderr, "Usage: docproc {doc|depend} file\n");
+ fprintf(stderr, "Usage: docproc {doc|depend} [-use-markdown] file\n");
fprintf(stderr, "Input is read from file.tmpl. Output is sent to stdout\n");
fprintf(stderr, "doc: frontend when generating kernel documentation\n");
fprintf(stderr, "depend: generate list of files referenced within file\n");
+ fprintf(stderr, "-use-markdown: pass -use-markdown to kernel-doc\n");
fprintf(stderr, "Environment variable SRCTREE: absolute path to sources.\n");
fprintf(stderr, " KBUILD_SRC: absolute path to kernel source tree.\n");
}
@@ -257,12 +261,15 @@ static void docfunctions(char * filename, char * type)
for (i=0; i <= symfilecnt; i++)
symcnt += symfilelist[i].symbolcnt;
- vec = malloc((2 + 2 * symcnt + 3) * sizeof(char *));
+ vec = malloc((2 + 2 * symcnt + 4) * sizeof(char *));
if (vec == NULL) {
perror("docproc: ");
exit(1);
}
vec[idx++] = KERNELDOC;
+ if (use_markdown)
+ vec[idx++] = USEMARKDOWN;
+
vec[idx++] = DOCBOOK;
vec[idx++] = NODOCSECTIONS;
for (i=0; i < symfilecnt; i++) {
@@ -294,6 +301,9 @@ static void singfunc(char * filename, char * line)
int i, idx = 0;
int startofsym = 1;
vec[idx++] = KERNELDOC;
+ if (use_markdown)
+ vec[idx++] = USEMARKDOWN;
+
vec[idx++] = DOCBOOK;
vec[idx++] = SHOWNOTFOUND;
@@ -328,8 +338,9 @@ static void singfunc(char * filename, char * line)
static void docsect(char *filename, char *line)
{
/* kerneldoc -docbook -show-not-found -function "section" file NULL */
- char *vec[7];
+ char *vec[8];
char *s;
+ int idx = 0;
for (s = line; *s; s++)
if (*s == '\n')
@@ -342,30 +353,37 @@ static void docsect(char *filename, char *line)
consume_symbol(s);
free(s);
- vec[0] = KERNELDOC;
- vec[1] = DOCBOOK;
- vec[2] = SHOWNOTFOUND;
- vec[3] = FUNCTION;
- vec[4] = line;
- vec[5] = filename;
- vec[6] = NULL;
+ vec[idx++] = KERNELDOC;
+ if (use_markdown)
+ vec[idx++] = USEMARKDOWN;
+
+ vec[idx++] = DOCBOOK;
+ vec[idx++] = SHOWNOTFOUND;
+ vec[idx++] = FUNCTION;
+ vec[idx++] = line;
+ vec[idx++] = filename;
+ vec[idx] = NULL;
exec_kernel_doc(vec);
}
static void find_all_symbols(char *filename)
{
- char *vec[4]; /* kerneldoc -list file NULL */
+ char *vec[5]; /* kerneldoc -list file NULL */
pid_t pid;
int ret, i, count, start;
char real_filename[PATH_MAX + 1];
int pipefd[2];
char *data, *str;
size_t data_len = 0;
+ int idx = 0;
+
+ vec[idx++] = KERNELDOC;
+ if (use_markdown)
+ vec[idx++] = USEMARKDOWN;
- vec[0] = KERNELDOC;
- vec[1] = LIST;
- vec[2] = filename;
- vec[3] = NULL;
+ vec[idx++] = LIST;
+ vec[idx++] = filename;
+ vec[idx] = NULL;
if (pipe(pipefd)) {
perror("pipe");
@@ -509,7 +527,7 @@ int main(int argc, char *argv[])
kernsrctree = getenv("KBUILD_SRC");
if (!kernsrctree || !*kernsrctree)
kernsrctree = srctree;
- if (argc != 3) {
+ if (argc < 3 || argc > 4) {
usage();
exit(1);
}
@@ -521,6 +539,10 @@ int main(int argc, char *argv[])
exit(2);
}
+ if (argc == 4 && strcmp("-use-markdown", argv[3]) == 0) {
+ use_markdown = 1;
+ }
+
if (strcmp("doc", argv[1]) == 0) {
/* Need to do this in two passes.
* First pass is used to collect all symbols exported
@@ -1,6 +1,7 @@
#!/usr/bin/perl -w
use strict;
+use IPC::Open3;
## Copyright (c) 1998 Michael Zucchi, All Rights Reserved ##
## Copyright (C) 2000, 1 Tim Waugh <twaugh@redhat.com> ##
@@ -258,6 +259,7 @@ if ($#ARGV == -1) {
my $kernelversion;
my $dohighlight = "";
+my $use_markdown = 0;
my $verbose = 0;
my $output_mode = "man";
@@ -378,6 +380,8 @@ while ($ARGV[0] =~ m/^-(.*)/) {
$function_only = 2;
$function = shift @ARGV;
$function_table{$function} = 1;
+ } elsif ($cmd eq "-use-markdown") {
+ $use_markdown = 1;
} elsif ($cmd eq "-v") {
$verbose = 1;
} elsif (($cmd eq "-h") || ($cmd eq "--help")) {
@@ -396,6 +400,7 @@ sub usage {
print " [ -no-doc-sections ]\n";
print " [ -function funcname [ -function funcname ...] ]\n";
print " [ -nofunction funcname [ -nofunction funcname ...] ]\n";
+ print " [ -use-markdown ]\n";
print " [ -v ]\n";
print " c source file(s) > outputfile\n";
print " -v : verbose output, more warnings & other info listed\n";
@@ -469,6 +474,49 @@ sub dump_doc_section {
}
}
+sub markdown_to_docbook {
+ my $orig_content = $_[0];
+
+ my $pid = open3( \*CHLD_IN, \*CHLD_OUT, \*CHLD_ERR, "pandoc --columns=80 -f markdown -t docbook" );
+
+ print CHLD_IN "$orig_content";
+ close(CHLD_IN);
+
+ waitpid($pid, 0);
+
+ my $content = "";
+ chomp(my @lines = <CHLD_OUT>);
+ foreach my $line (@lines) {
+ $content .= $line . "\n";
+ }
+ close(CHLD_OUT);
+ close(CHLD_ERR);
+
+ # pandoc insists in adding Main <para></para>, we should remove them.
+ $content =~ s:\A\s*<para>\s*\n(.*)\n</para>\Z$:$1:egsm;
+
+ return $content;
+}
+
+# Markdown->Docbook conversion by pandoc requires unescaped text
+# Kernel-doc converts every & to "&", we need to convert it back.
+sub markdown_unescape
+{
+ my $text = shift;
+ my @lines = split /\n/, $text;
+
+ my @result;
+ foreach my $line (@lines) {
+ if ( $line =~ m /^ /s ) {
+ $line =~ s:\&:\&:gs
+ }
+ push @result, $line;
+ }
+
+ return join "\n",@result;
+
+}
+
##
# output function
#
@@ -495,11 +543,19 @@ sub output_highlight {
$contents = local_unescape($contents);
# convert data read & converted thru xml_escape() into &xyz; format:
$contents =~ s/\\\\\\/\&/g;
+
+ if ($use_markdown) {
+ $contents = markdown_unescape($contents);
+ }
}
+
# print STDERR "contents b4:$contents\n";
eval $dohighlight;
die $@ if $@;
# print STDERR "contents af:$contents\n";
+ if ($use_markdown) {
+ $contents = markdown_to_docbook($contents);
+ }
# strip whitespaces when generating html5
if ($output_mode eq "html5") {
@@ -507,7 +563,8 @@ sub output_highlight {
$contents =~ s/\s+$//;
}
foreach $line (split "\n", $contents) {
- if (! $output_preformatted) {
+ if (! $output_preformatted &&
+ !($use_markdown && $line =~ m /^ /s)) {
$line =~ s/^\s*//;
}
if ($line eq ""){
@@ -928,7 +985,9 @@ sub output_section_xml(%) {
print "<refsect1>\n";
print "<title>$section</title>\n";
if ($section =~ m/EXAMPLE/i) {
- print "<informalexample><programlisting>\n";
+ print "<informalexample>\n";
+ # programlisting is already included by pandoc
+ print "<programlisting>\n" unless $use_markdown;
$output_preformatted = 1;
} else {
print "<para>\n";
@@ -936,7 +995,8 @@ sub output_section_xml(%) {
output_highlight($args{'sections'}{$section});
$output_preformatted = 0;
if ($section =~ m/EXAMPLE/i) {
- print "</programlisting></informalexample>\n";
+ print "</programlisting>\n" unless $use_markdown;
+ print "</informalexample>\n";
} else {
print "</para>\n";
}
Markdown support is given by calling an external tool, pandoc, for all highlighted text on kernel-doc. Pandoc converts Markdown text to proper Docbook tags, which will be later translated to pdf, html or other targets. This adds the capability of adding human-readle text highlight (bold, underline, etc), bullet and numbered lists, simple tables, fixed-width text (including asciiart), requiring minimal changes to current documentation. So, text using *must* will be rendered as <emphasis>must</empasis> inside DocBook and then <strong>must</strong> for HTML. Bullet lists eg: * Element 1 * Element 2 will also be converted to proper docbook/html lists. Although it has the support for a good part of the markup language, pandoc has some limitations and won't render tables with spanning cells or headings. The use of those features are not recommended. At this moment, pandoc is totally optional. Docbooks ready for markdown should be added to the MARKDOWNREADY variable inside the Makefile. In case the developer doesn't have pandoc installed, Make will throw a warning and the documentation build will continue, generating simple Documentation without the features brought by pandoc. Signed-off-by: Danilo Cesar Lemes de Paula <danilo.cesar@collabora.co.uk> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Stephan Mueller <smueller@chronox.de> Cc: Michal Marek <mmarek@suse.cz> Cc: linux-kernel@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: intel-gfx <intel-gfx@lists.freedesktop.org> Cc: dri-devel <dri-devel@lists.freedesktop.org> --- Changelog: v2: * Fix checkpatch issues. * Improved commit message. * Fixed dependency issue causing "make htmldocs" recalculate without any code change. Documentation/DocBook/Makefile | 25 +++++++++++----- scripts/docproc.c | 54 ++++++++++++++++++++++++---------- scripts/kernel-doc | 66 ++++++++++++++++++++++++++++++++++++++++-- 3 files changed, 119 insertions(+), 26 deletions(-)