@@ -391,6 +391,49 @@ static const struct intel_device_info intel_broxton_info = {
IVB_CURSOR_OFFSETS,
};
+/* stepping info */
+struct stepping_info {
+ char stepping;
+ char substepping;
+};
+
+/* skl stepping info */
+static const struct stepping_info skl_stepping_info[] = {
+ {'A', '0'}, {'B', '0'}, {'C', '0'},
+ {'D', '0'}, {'E', '0'}, {'F', '0'},
+ {'G', '0'}, {'H', '0'}, {'I', '0'},
+};
+
+/**
+ * intel_get_stepping() - get stepping info
+ * @dev: drm device.
+ *
+ * Returns stepping id 'A', 'B', 'C', etc.
+ */
+char intel_get_stepping(struct drm_device *dev)
+{
+ if (IS_SKYLAKE(dev) && (dev->pdev->revision <
+ ARRAY_SIZE(skl_stepping_info)))
+ return skl_stepping_info[dev->pdev->revision].stepping;
+ else
+ return -ENODATA;
+}
+
+/**
+ * intel_get_substepping() - get substepping info
+ * @dev: drm device.
+ *
+ * Returns substepping id '0', '1', '2', etc.
+ */
+char intel_get_substepping(struct drm_device *dev)
+{
+ if (IS_SKYLAKE(dev) && (dev->pdev->revision <
+ ARRAY_SIZE(skl_stepping_info)))
+ return skl_stepping_info[dev->pdev->revision].substepping;
+ else
+ return -ENODATA;
+}
+
/*
* Make sure any device matches here are from most specific to most
* general. For example, since the Quanta match is based on the subsystem
@@ -5354,6 +5354,18 @@ enum skl_disp_power_wells {
#define PLANE_NV12_BUF_CFG(pipe, plane) \
_PLANE(plane, _PLANE_NV12_BUF_CFG_1(pipe), _PLANE_NV12_BUF_CFG_2(pipe))
+/*
+ * Skylake Chicken registers
+ */
+#define _CHICKEN_PIPESL_A 0x420B0
+#define _CHICKEN_PIPESL_B 0x420B4
+#define _CHICKEN_PIPESL_C 0x420B8
+#define DISABLE_STREAMER_FIX (1 << 22)
+#define CHICKEN_PIPESL(pipe) _PIPE(pipe, _CHICKEN_PIPESL_A, _CHICKEN_PIPESL_B)
+
+#define CHICKEN_DCPR_1 0x46430
+#define IDLE_WAKEMEM_MASK (1 << 13)
+
/* SKL new cursor registers */
#define _CUR_BUF_CFG_A 0x7017c
#define _CUR_BUF_CFG_B 0x7117c
@@ -170,35 +170,6 @@ struct intel_dmc_header {
uint32_t reserved1[2];
} __packed;
-struct stepping_info {
- char stepping;
- char substepping;
-};
-
-static const struct stepping_info skl_stepping_info[] = {
- {'A', '0'}, {'B', '0'}, {'C', '0'},
- {'D', '0'}, {'E', '0'}, {'F', '0'},
- {'G', '0'}, {'H', '0'}, {'I', '0'}
-};
-
-static char intel_get_stepping(struct drm_device *dev)
-{
- if (IS_SKYLAKE(dev) && (dev->pdev->revision <
- ARRAY_SIZE(skl_stepping_info)))
- return skl_stepping_info[dev->pdev->revision].stepping;
- else
- return -ENODATA;
-}
-
-static char intel_get_substepping(struct drm_device *dev)
-{
- if (IS_SKYLAKE(dev) && (dev->pdev->revision <
- ARRAY_SIZE(skl_stepping_info)))
- return skl_stepping_info[dev->pdev->revision].substepping;
- else
- return -ENODATA;
-}
-
/**
* intel_csr_load_status_get() - to get firmware loading status.
* @dev_priv: i915 device.
@@ -3196,6 +3196,17 @@ static void skylake_update_primary_plane(struct drm_crtc *crtc,
I915_WRITE(PLANE_AUX_DIST(pipe, 0), aux_dist | aux_stride);
I915_WRITE(PLANE_AUX_OFFSET(pipe, 0), aux_y_offset << 16 | aux_x_offset);
+ /*
+ * Per bspec, for SKL C and BXT A steppings, when the plane source pixel
+ * format is NV12, the CHICKEN_PIPESL register bit 22 must be set to 1
+ */
+ if (((IS_SKYLAKE(dev) && intel_get_stepping(dev) == 'C') ||
+ (IS_BROXTON(dev) && intel_get_stepping(dev) == 'A')) &&
+ fb->pixel_format == DRM_FORMAT_NV12) {
+ I915_WRITE(CHICKEN_PIPESL(pipe),
+ I915_READ(CHICKEN_PIPESL(pipe)) | DISABLE_STREAMER_FIX);
+ }
+
if (scaler_id >= 0) {
uint32_t ps_ctrl = 0;
@@ -992,6 +992,8 @@ void i915_audio_component_cleanup(struct drm_i915_private *dev_priv);
/* intel_display.c */
extern const struct drm_plane_funcs intel_plane_funcs;
bool intel_has_pending_fb_unpin(struct drm_device *dev);
+char intel_get_stepping(struct drm_device *dev);
+char intel_get_substepping(struct drm_device *dev);
int intel_pch_rawclk(struct drm_device *dev);
void intel_mark_busy(struct drm_device *dev);
void intel_mark_idle(struct drm_device *dev);
@@ -278,6 +278,17 @@ skl_update_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc,
I915_WRITE(PLANE_AUX_DIST(pipe, plane), aux_dist | aux_stride);
I915_WRITE(PLANE_AUX_OFFSET(pipe, plane), aux_y_offset<<16 | aux_x_offset);
+ /*
+ * Per bspec, for SKL C and BXT A steppings, when the plane source pixel
+ * format is NV12, the CHICKEN_PIPESL register bit 22 must be set to 1
+ */
+ if (((IS_SKYLAKE(dev) && intel_get_stepping(dev) == 'C') ||
+ (IS_BROXTON(dev) && intel_get_stepping(dev) == 'A')) &&
+ fb->pixel_format == DRM_FORMAT_NV12) {
+ I915_WRITE(CHICKEN_PIPESL(pipe),
+ I915_READ(CHICKEN_PIPESL(pipe)) | DISABLE_STREAMER_FIX);
+ }
+
/* program plane scaler */
if (scaler_id >= 0) {
uint32_t ps_ctrl = 0;
When the plane source pixel format is NV12, the CHICKEN_PIPESL register bit 22 must be set to 1 v2: -one wa per commit with comments, and function headers (Daniel) v3: -moved intel stepping helper functions to i915_drv.c (Daniel) Signed-off-by: Chandra Konduru <chandra.konduru@intel.com> --- drivers/gpu/drm/i915/i915_drv.c | 43 ++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/i915_reg.h | 12 ++++++++++ drivers/gpu/drm/i915/intel_csr.c | 29 ----------------------- drivers/gpu/drm/i915/intel_display.c | 11 +++++++++ drivers/gpu/drm/i915/intel_drv.h | 2 ++ drivers/gpu/drm/i915/intel_sprite.c | 11 +++++++++ 6 files changed, 79 insertions(+), 29 deletions(-)