@@ -2056,7 +2056,8 @@ struct drm_i915_private {
/* perform PHY state sanity checks? */
bool chv_phy_assert[2];
- struct intel_encoder *dig_port_map[I915_MAX_PORTS];
+ /* Used to save the pipe-to-encoder mapping for audio */
+ struct intel_encoder *av_enc_map[I915_MAX_PIPES];
/*
* NOTE: This is the dri1/ums dungeon, don't add stuff here. Your patch
@@ -491,6 +491,7 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder)
struct drm_i915_private *dev_priv = to_i915(encoder->dev);
struct i915_audio_component *acomp = dev_priv->audio_component;
enum port port = intel_encoder->port;
+ enum pipe pipe = crtc->pipe;
connector = drm_select_eld(encoder);
if (!connector)
@@ -515,12 +516,18 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder)
mutex_lock(&dev_priv->av_mutex);
intel_encoder->audio_connector = connector;
+
/* referred in audio callbacks */
- dev_priv->dig_port_map[port] = intel_encoder;
+ dev_priv->av_enc_map[pipe] = intel_encoder;
mutex_unlock(&dev_priv->av_mutex);
+ /* audio drivers expect pipe = -1 to indicate Non-MST cases */
+ if (intel_encoder->type != INTEL_OUTPUT_DP_MST)
+ pipe = -1;
+
if (acomp && acomp->audio_ops && acomp->audio_ops->pin_eld_notify)
- acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr, (int) port);
+ acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr,
+ (int) port, (int) pipe);
}
/**
@@ -536,17 +543,24 @@ void intel_audio_codec_disable(struct intel_encoder *intel_encoder)
struct drm_i915_private *dev_priv = to_i915(encoder->dev);
struct i915_audio_component *acomp = dev_priv->audio_component;
enum port port = intel_encoder->port;
+ struct intel_crtc *crtc = to_intel_crtc(encoder->crtc);
+ enum pipe pipe = crtc->pipe;
if (dev_priv->display.audio_codec_disable)
dev_priv->display.audio_codec_disable(intel_encoder);
mutex_lock(&dev_priv->av_mutex);
intel_encoder->audio_connector = NULL;
- dev_priv->dig_port_map[port] = NULL;
+ dev_priv->av_enc_map[pipe] = NULL;
mutex_unlock(&dev_priv->av_mutex);
+ /* audio drivers expect pipe = -1 to indicate Non-MST cases */
+ if (intel_encoder->type != INTEL_OUTPUT_DP_MST)
+ pipe = -1;
+
if (acomp && acomp->audio_ops && acomp->audio_ops->pin_eld_notify)
- acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr, (int) port);
+ acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr,
+ (int) port, (int) pipe);
}
/**
@@ -621,15 +635,40 @@ static int i915_audio_component_get_cdclk_freq(struct device *kdev)
return dev_priv->cdclk_freq;
}
-static int i915_audio_component_sync_audio_rate(struct device *kdev,
- int port, int rate)
+static struct intel_encoder *get_saved_enc(struct drm_i915_private *dev_priv,
+ int port, int pipe)
+{
+
+ if (WARN_ON(pipe >= I915_MAX_PIPES))
+ return NULL;
+
+ /* MST */
+ if (pipe >= 0)
+ return dev_priv->av_enc_map[pipe];
+
+ /* Non-MST */
+ for_each_pipe(dev_priv, pipe) {
+ struct intel_encoder *encoder;
+
+ encoder = dev_priv->av_enc_map[pipe];
+ if (encoder == NULL)
+ continue;
+
+ if (port == encoder->port)
+ return encoder;
+ }
+
+ return NULL;
+}
+
+static int i915_audio_component_sync_audio_rate(struct device *kdev, int port,
+ int pipe, int rate)
{
struct drm_i915_private *dev_priv = kdev_to_i915(kdev);
struct intel_encoder *intel_encoder;
struct intel_crtc *crtc;
struct drm_display_mode *mode;
struct i915_audio_component *acomp = dev_priv->audio_component;
- enum pipe pipe = INVALID_PIPE;
u32 tmp;
int n;
int err = 0;
@@ -643,25 +682,20 @@ static int i915_audio_component_sync_audio_rate(struct device *kdev,
i915_audio_component_get_power(kdev);
mutex_lock(&dev_priv->av_mutex);
+
/* 1. get the pipe */
- intel_encoder = dev_priv->dig_port_map[port];
- /* intel_encoder might be NULL for DP MST */
+ intel_encoder = get_saved_enc(dev_priv, port, pipe);
if (!intel_encoder || !intel_encoder->base.crtc ||
intel_encoder->type != INTEL_OUTPUT_HDMI) {
- DRM_DEBUG_KMS("no valid port %c\n", port_name(port));
+ DRM_DEBUG_KMS("Not valid for port %c\n", port_name(port));
err = -ENODEV;
goto unlock;
}
+
+ /* pipe passed from the audio driver will be -1 for Non-MST case */
crtc = to_intel_crtc(intel_encoder->base.crtc);
pipe = crtc->pipe;
- if (pipe == INVALID_PIPE) {
- DRM_DEBUG_KMS("no pipe for the port %c\n", port_name(port));
- err = -ENODEV;
- goto unlock;
- }
- DRM_DEBUG_KMS("pipe %c connects port %c\n",
- pipe_name(pipe), port_name(port));
mode = &crtc->config->base.adjusted_mode;
/* port must be valid now, otherwise the pipe will be invalid */
@@ -697,7 +731,7 @@ static int i915_audio_component_sync_audio_rate(struct device *kdev,
}
static int i915_audio_component_get_eld(struct device *kdev, int port,
- bool *enabled,
+ int pipe, bool *enabled,
unsigned char *buf, int max_bytes)
{
struct drm_i915_private *dev_priv = kdev_to_i915(kdev);
@@ -706,16 +740,20 @@ static int i915_audio_component_get_eld(struct device *kdev, int port,
int ret = -EINVAL;
mutex_lock(&dev_priv->av_mutex);
- intel_encoder = dev_priv->dig_port_map[port];
- /* intel_encoder might be NULL for DP MST */
- if (intel_encoder) {
- ret = 0;
- *enabled = intel_encoder->audio_connector != NULL;
- if (*enabled) {
- eld = intel_encoder->audio_connector->eld;
- ret = drm_eld_size(eld);
- memcpy(buf, eld, min(max_bytes, ret));
- }
+
+ intel_encoder = get_saved_enc(dev_priv, port, pipe);
+ if (!intel_encoder) {
+ DRM_DEBUG_KMS("Not valid for port %c\n", port_name(port));
+ mutex_unlock(&dev_priv->av_mutex);
+ return ret;
+ }
+
+ ret = 0;
+ *enabled = intel_encoder->audio_connector != NULL;
+ if (*enabled) {
+ eld = intel_encoder->audio_connector->eld;
+ ret = drm_eld_size(eld);
+ memcpy(buf, eld, min(max_bytes, ret));
}
mutex_unlock(&dev_priv->av_mutex);
@@ -64,7 +64,7 @@ struct i915_audio_component_ops {
* Called from audio driver. After audio driver sets the
* sample rate, it will call this function to set n/cts
*/
- int (*sync_audio_rate)(struct device *, int port, int rate);
+ int (*sync_audio_rate)(struct device *, int port, int pipe, int rate);
/**
* @get_eld: fill the audio state and ELD bytes for the given port
*
@@ -77,7 +77,7 @@ struct i915_audio_component_ops {
* Note that the returned size may be over @max_bytes. Then it
* implies that only a part of ELD has been copied to the buffer.
*/
- int (*get_eld)(struct device *, int port, bool *enabled,
+ int (*get_eld)(struct device *, int port, int pipe, bool *enabled,
unsigned char *buf, int max_bytes);
};
@@ -97,7 +97,7 @@ struct i915_audio_component_audio_ops {
* status accordingly (even when the HDA controller is in power save
* mode).
*/
- void (*pin_eld_notify)(void *audio_ptr, int port);
+ void (*pin_eld_notify)(void *audio_ptr, int port, int pipe);
};
/**
@@ -10,8 +10,9 @@
int snd_hdac_set_codec_wakeup(struct hdac_bus *bus, bool enable);
int snd_hdac_display_power(struct hdac_bus *bus, bool enable);
void snd_hdac_i915_set_bclk(struct hdac_bus *bus);
-int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid, int rate);
-int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid,
+int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid,
+ int dev_id, int rate);
+int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid, int dev_id,
bool *audio_enabled, char *buffer, int max_bytes);
int snd_hdac_i915_init(struct hdac_bus *bus);
int snd_hdac_i915_exit(struct hdac_bus *bus);
@@ -29,13 +30,13 @@ static inline void snd_hdac_i915_set_bclk(struct hdac_bus *bus)
{
}
static inline int snd_hdac_sync_audio_rate(struct hdac_device *codec,
- hda_nid_t nid, int rate)
+ hda_nid_t nid, int dev_id, int rate)
{
return 0;
}
static inline int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid,
- bool *audio_enabled, char *buffer,
- int max_bytes)
+ int dev_id, bool *audio_enabled,
+ char *buffer, int max_bytes)
{
return -ENODEV;
}
@@ -201,18 +201,20 @@ static int pin2port(struct hdac_device *codec, hda_nid_t pin_nid)
* This function sets N/CTS value based on the given sample rate.
* Returns zero for success, or a negative error code.
*/
-int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid, int rate)
+int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid,
+ int dev_id, int rate)
{
struct hdac_bus *bus = codec->bus;
struct i915_audio_component *acomp = bus->audio_component;
- int port;
+ int port, pipe;
if (!acomp || !acomp->ops || !acomp->ops->sync_audio_rate)
return -ENODEV;
port = pin2port(codec, nid);
if (port < 0)
return -EINVAL;
- return acomp->ops->sync_audio_rate(acomp->dev, port, rate);
+ pipe = dev_id;
+ return acomp->ops->sync_audio_rate(acomp->dev, port, pipe, rate);
}
EXPORT_SYMBOL_GPL(snd_hdac_sync_audio_rate);
@@ -236,12 +238,12 @@ EXPORT_SYMBOL_GPL(snd_hdac_sync_audio_rate);
* thus it may be over @max_bytes. If it's over @max_bytes, it implies
* that only a part of ELD bytes have been fetched.
*/
-int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid,
+int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid, int dev_id,
bool *audio_enabled, char *buffer, int max_bytes)
{
struct hdac_bus *bus = codec->bus;
struct i915_audio_component *acomp = bus->audio_component;
- int port;
+ int port, pipe;
if (!acomp || !acomp->ops || !acomp->ops->get_eld)
return -ENODEV;
@@ -249,7 +251,9 @@ int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid,
port = pin2port(codec, nid);
if (port < 0)
return -EINVAL;
- return acomp->ops->get_eld(acomp->dev, port, audio_enabled,
+
+ pipe = dev_id;
+ return acomp->ops->get_eld(acomp->dev, port, pipe, audio_enabled,
buffer, max_bytes);
}
EXPORT_SYMBOL_GPL(snd_hdac_acomp_get_eld);
@@ -1485,7 +1485,7 @@ static void sync_eld_via_acomp(struct hda_codec *codec,
mutex_lock(&per_pin->lock);
eld->monitor_present = false;
- size = snd_hdac_acomp_get_eld(&codec->core, per_pin->pin_nid,
+ size = snd_hdac_acomp_get_eld(&codec->core, per_pin->pin_nid, -1,
&eld->monitor_present, eld->eld_buffer,
ELD_MAX_SIZE);
if (size > 0) {
@@ -1744,7 +1744,8 @@ static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
/* Call sync_audio_rate to set the N/CTS/M manually if necessary */
/* Todo: add DP1.2 MST audio support later */
if (codec_has_acomp(codec))
- snd_hdac_sync_audio_rate(&codec->core, pin_nid, runtime->rate);
+ snd_hdac_sync_audio_rate(&codec->core, pin_nid, -1,
+ runtime->rate);
non_pcm = check_non_pcm_per_cvt(codec, cvt_nid);
mutex_lock(&per_pin->lock);
@@ -2290,7 +2291,7 @@ static void haswell_set_power_state(struct hda_codec *codec, hda_nid_t fg,
snd_hda_codec_set_power_to_all(codec, fg, power_state);
}
-static void intel_pin_eld_notify(void *audio_ptr, int port)
+static void intel_pin_eld_notify(void *audio_ptr, int port, int pipe)
{
struct hda_codec *codec = audio_ptr;
int pin_nid;
@@ -1368,7 +1368,7 @@ static int hdac_hdmi_parse_and_map_nid(struct hdac_ext_device *edev,
return hdac_hdmi_init_dai_map(edev);
}
-static void hdac_hdmi_eld_notify_cb(void *aptr, int port)
+static void hdac_hdmi_eld_notify_cb(void *aptr, int port, int pipe)
{
struct hdac_ext_device *edev = aptr;
struct hdac_hdmi_priv *hdmi = edev->private_data;