@@ -1232,6 +1232,8 @@ struct i915_psr {
bool psr2_support;
bool aux_frame_sync;
bool link_standby;
+ bool y_cord_support;
+ bool colorimetry_support;
};
enum intel_pch {
@@ -3042,6 +3042,24 @@ static void chv_dp_post_pll_disable(struct intel_encoder *encoder,
DP_LINK_STATUS_SIZE) == DP_LINK_STATUS_SIZE;
}
+static bool intel_dp_get_y_cord_status(struct intel_dp *intel_dp)
+{
+ uint8_t psr_caps = 0;
+
+ drm_dp_dpcd_readb(&intel_dp->aux, DP_PSR_CAPS, &psr_caps);
+ return psr_caps & DP_PSR2_SU_Y_COORDINATE_REQUIRED;
+}
+
+static bool intel_dp_get_colorimetry_status(struct intel_dp *intel_dp)
+{
+ uint8_t dprx = 0;
+
+ drm_dp_dpcd_readb(&intel_dp->aux,
+ DP_DPRX_FEATURE_ENUMERATION_LIST,
+ &dprx);
+ return dprx & DP_VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED;
+}
+
/* These are source-specific values. */
uint8_t
intel_dp_voltage_max(struct intel_dp *intel_dp)
@@ -3620,6 +3638,14 @@ void intel_dp_set_idle_link_train(struct intel_dp *intel_dp)
dev_priv->psr.psr2_support = dev_priv->psr.aux_frame_sync;
DRM_DEBUG_KMS("PSR2 %s on sink",
dev_priv->psr.psr2_support ? "supported" : "not supported");
+
+ if (dev_priv->psr.psr2_support) {
+ dev_priv->psr.y_cord_support =
+ intel_dp_get_y_cord_status(intel_dp);
+ dev_priv->psr.colorimetry_support =
+ intel_dp_get_colorimetry_status(intel_dp);
+ }
+
}
/* Read the eDP Display control capabilities registers */
@@ -122,13 +122,26 @@ static void vlv_psr_setup_vsc(struct intel_dp *intel_dp)
static void skl_psr_setup_su_vsc(struct intel_dp *intel_dp)
{
struct edp_vsc_psr psr_vsc;
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
/* Prepare VSC Header for SU as per EDP 1.4 spec, Table 6.11 */
memset(&psr_vsc, 0, sizeof(psr_vsc));
psr_vsc.sdp_header.HB0 = 0;
psr_vsc.sdp_header.HB1 = 0x7;
- psr_vsc.sdp_header.HB2 = 0x3;
- psr_vsc.sdp_header.HB3 = 0xb;
+ if (dev_priv->psr.colorimetry_support &&
+ dev_priv->psr.y_cord_support) {
+ psr_vsc.sdp_header.HB2 = 0x5;
+ psr_vsc.sdp_header.HB3 = 0x13;
+ } else if (dev_priv->psr.y_cord_support) {
+ psr_vsc.sdp_header.HB2 = 0x4;
+ psr_vsc.sdp_header.HB3 = 0xe;
+ } else {
+ psr_vsc.sdp_header.HB2 = 0x3;
+ psr_vsc.sdp_header.HB3 = 0xc;
+ }
+
intel_psr_write_vsc(intel_dp, &psr_vsc);
}
Function hsw_psr_setup handles vsc header setup for psr1 and skl_psr_setup_vsc handles vsc header setup for psr2. Setup VSC header in function skl_psr_setup_vsc for psr2 support, as per edp 1.4 spec, table 6-11:VSC SDP HEADER Extension for psr2 operation. v2: (Jani) - Initialize variables to 0 - intel_dp_get_y_cord_status and intel_dp_get_y_cord_status made static - Correct indentation for continuation lines - Change DP_PSR_Y_COORDINATE to DP_PSR2_SU_Y_COORDINATE_REQUIRED - Change DPRX_FEATURE_ENUMERATION_LIST to DP_DPRX_* - Change VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED to DP_VSC_* Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com> --- drivers/gpu/drm/i915/i915_drv.h | 2 ++ drivers/gpu/drm/i915/intel_dp.c | 26 ++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_psr.c | 17 +++++++++++++++-- 3 files changed, 43 insertions(+), 2 deletions(-)