@@ -57,6 +57,7 @@ i915-y += i915_cmd_parser.o \
# general-purpose microcontroller (GuC) support
i915-y += intel_uc.o \
intel_guc_loader.o \
+ intel_huc_loader.o \
i915_guc_submission.o
# autogenerated null render state
@@ -599,6 +599,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
if (ret)
goto cleanup_irq;
+ intel_huc_init(dev_priv);
intel_guc_init(dev_priv);
ret = i915_gem_init(dev_priv);
@@ -627,6 +628,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
i915_gem_fini(dev_priv);
cleanup_irq:
intel_guc_fini(dev_priv);
+ intel_huc_fini(dev_priv);
drm_irq_uninstall(dev);
intel_teardown_gmbus(dev_priv);
cleanup_csr:
@@ -1314,6 +1316,7 @@ void i915_driver_unload(struct drm_device *dev)
drain_workqueue(dev_priv->wq);
intel_guc_fini(dev_priv);
+ intel_huc_fini(dev_priv);
i915_gem_fini(dev_priv);
intel_fbc_cleanup_cfb(dev_priv);
@@ -2073,6 +2073,7 @@ struct drm_i915_private {
struct intel_gvt *gvt;
+ struct intel_huc huc;
struct intel_guc guc;
struct intel_csr csr;
@@ -2847,6 +2848,7 @@ intel_info(const struct drm_i915_private *dev_priv)
#define HAS_GUC(dev_priv) ((dev_priv)->info.has_guc)
#define HAS_GUC_UCODE(dev_priv) (HAS_GUC(dev_priv))
#define HAS_GUC_SCHED(dev_priv) (HAS_GUC(dev_priv))
+#define HAS_HUC_UCODE(dev_priv) (HAS_GUC(dev_priv))
#define HAS_RESOURCE_STREAMER(dev_priv) ((dev_priv)->info.has_resource_streamer)
@@ -61,12 +61,18 @@
#define DMA_ADDRESS_SPACE_GTT (8 << 16)
#define DMA_COPY_SIZE _MMIO(0xc310)
#define DMA_CTRL _MMIO(0xc314)
+#define HUC_UKERNEL (1<<9)
#define UOS_MOVE (1<<4)
#define START_DMA (1<<0)
#define DMA_GUC_WOPCM_OFFSET _MMIO(0xc340)
+#define HUC_LOADING_AGENT_VCR (0<<1)
+#define HUC_LOADING_AGENT_GUC (1<<1)
#define GUC_WOPCM_OFFSET_VALUE 0x80000 /* 512KB */
#define GUC_MAX_IDLE_COUNT _MMIO(0xC3E4)
+#define HUC_STATUS2 _MMIO(0xD3B0)
+#define HUC_FW_VERIFIED (1<<7)
+
/* Defines WOPCM space available to GuC firmware */
#define GUC_WOPCM_SIZE _MMIO(0xc050)
/* GuC addresses below GUC_WOPCM_TOP don't map through the GTT */
@@ -334,7 +334,7 @@ static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,
return ret;
}
-static u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
+u32 intel_guc_wopcm_size(struct drm_i915_private *dev_priv)
{
u32 wopcm_size = GUC_WOPCM_TOP;
@@ -372,7 +372,7 @@ static int guc_ucode_xfer(struct drm_i915_private *dev_priv)
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
/* init WOPCM */
- I915_WRITE(GUC_WOPCM_SIZE, guc_wopcm_size(dev_priv));
+ I915_WRITE(GUC_WOPCM_SIZE, intel_guc_wopcm_size(dev_priv));
I915_WRITE(DMA_GUC_WOPCM_OFFSET, GUC_WOPCM_OFFSET_VALUE);
/* Enable MIA caching. GuC clock gating is disabled. */
@@ -511,6 +511,7 @@ int intel_guc_setup(struct drm_i915_private *dev_priv)
if (err)
goto fail;
+ intel_huc_load(dev_priv);
err = guc_ucode_xfer(dev_priv);
if (!err)
break;
@@ -658,7 +659,7 @@ void intel_uc_fw_fetch(struct drm_i915_private *dev_priv,
size = uc_fw->header_size + uc_fw->ucode_size;
/* Top 32k of WOPCM is reserved (8K stack + 24k RC6 context). */
- if (size > guc_wopcm_size(dev_priv)) {
+ if (size > intel_guc_wopcm_size(dev_priv)) {
DRM_ERROR("Firmware is too large to fit in WOPCM\n");
goto fail;
}
new file mode 100644
@@ -0,0 +1,264 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+#include <linux/firmware.h>
+#include "i915_drv.h"
+#include "intel_uc.h"
+
+/**
+ * DOC: HuC Firmware
+ *
+ * Motivation:
+ * GEN9 introduces a new dedicated firmware for usage in media HEVC (High
+ * Efficiency Video Coding) operations. Userspace can use the firmware
+ * capabilities by adding HuC specific commands to batch buffers.
+ *
+ * Implementation:
+ * The same firmware loader is used as the GuC. However, the actual
+ * loading to HW is deferred until GEM initialization is done.
+ *
+ * Note that HuC firmware loading must be done before GuC loading.
+ */
+
+#define SKL_HUC_FW_MAJOR 01
+#define SKL_HUC_FW_MINOR 07
+#define SKL_BLD_NUM 1398
+
+#define HUC_FW_PATH(platform, major, minor, bld_num) \
+ "i915/" __stringify(platform) "_huc_ver" __stringify(major) "_" \
+ __stringify(minor) "_" __stringify(bld_num) ".bin"
+
+#define I915_SKL_HUC_UCODE HUC_FW_PATH(skl, SKL_HUC_FW_MAJOR, \
+ SKL_HUC_FW_MINOR, SKL_BLD_NUM)
+MODULE_FIRMWARE(I915_SKL_HUC_UCODE);
+
+/**
+ * huc_ucode_xfer() - DMA's the firmware
+ * @dev_priv: the drm_i915_private device
+ *
+ * Transfer the firmware image to RAM for execution by the microcontroller.
+ *
+ * Return: 0 on success, non-zero on failure
+ */
+static int huc_ucode_xfer(struct drm_i915_private *dev_priv)
+{
+ struct intel_uc_fw *huc_fw = &dev_priv->huc.fw;
+ struct i915_vma *vma;
+ unsigned long offset = 0;
+ u32 size;
+ int ret;
+
+ ret = i915_gem_object_set_to_gtt_domain(huc_fw->obj, false);
+ if (ret) {
+ DRM_DEBUG_DRIVER("set-domain failed %d\n", ret);
+ return ret;
+ }
+
+ vma = i915_gem_object_ggtt_pin(huc_fw->obj, NULL, 0, 0, 0);
+ if (IS_ERR(vma)) {
+ DRM_DEBUG_DRIVER("pin failed %d\n", (int)PTR_ERR(vma));
+ return PTR_ERR(vma);
+ }
+
+ /* Invalidate GuC TLB to let GuC take the latest updates to GTT. */
+ I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE);
+
+ intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
+
+ /* init WOPCM */
+ I915_WRITE(GUC_WOPCM_SIZE, intel_guc_wopcm_size(dev_priv));
+ I915_WRITE(DMA_GUC_WOPCM_OFFSET, GUC_WOPCM_OFFSET_VALUE |
+ HUC_LOADING_AGENT_GUC);
+
+ /* Set the source address for the uCode */
+ offset = i915_ggtt_offset(vma) + huc_fw->header_offset;
+ I915_WRITE(DMA_ADDR_0_LOW, lower_32_bits(offset));
+ I915_WRITE(DMA_ADDR_0_HIGH, upper_32_bits(offset) & 0xFFFF);
+
+ /* Hardware doesn't look at destination address for HuC. Set it to 0,
+ * but still program the correct address space.
+ */
+ I915_WRITE(DMA_ADDR_1_LOW, 0);
+ I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
+
+ size = huc_fw->header_size + huc_fw->ucode_size;
+ I915_WRITE(DMA_COPY_SIZE, size);
+
+ /* Start the DMA */
+ I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(HUC_UKERNEL | START_DMA));
+
+ /* Wait for DMA to finish */
+ ret = wait_for((I915_READ(DMA_CTRL) & START_DMA) == 0, 100);
+
+ DRM_DEBUG_DRIVER("HuC DMA transfer wait over with ret %d\n", ret);
+
+ /* Disable the bits once DMA is over */
+ I915_WRITE(DMA_CTRL, _MASKED_BIT_DISABLE(HUC_UKERNEL));
+
+ intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
+
+ /*
+ * We keep the object pages for reuse during resume. But we can unpin it
+ * now that DMA has completed, so it doesn't continue to take up space.
+ */
+ i915_vma_unpin(vma);
+
+ return ret;
+}
+
+/**
+ * intel_huc_init() - initiate HuC firmware loading request
+ * @dev_priv: the drm_i915_private device
+ *
+ * Called early during driver load, but after GEM is initialised. The loading
+ * will continue only when driver explicitly specify firmware name and version.
+ * All other cases are considered as INTEL_UC_FIRMWARE_NONE either because HW
+ * is not capable or driver yet support it. And there will be no error message
+ * for INTEL_UC_FIRMWARE_NONE cases.
+ *
+ * The DMA-copying to HW is done later when intel_huc_load() is called.
+ */
+void intel_huc_init(struct drm_i915_private *dev_priv)
+{
+ struct intel_huc *huc = &dev_priv->huc;
+ struct intel_uc_fw *huc_fw = &huc->fw;
+ const char *fw_path = NULL;
+
+ huc_fw->path = NULL;
+ huc_fw->fetch_status = INTEL_UC_FIRMWARE_NONE;
+ huc_fw->load_status = INTEL_UC_FIRMWARE_NONE;
+ huc_fw->fw = INTEL_UC_FW_TYPE_HUC;
+
+ if (!HAS_HUC_UCODE(dev_priv))
+ return;
+
+ if (IS_SKYLAKE(dev_priv)) {
+ fw_path = I915_SKL_HUC_UCODE;
+ huc_fw->major_ver_wanted = SKL_HUC_FW_MAJOR;
+ huc_fw->minor_ver_wanted = SKL_HUC_FW_MINOR;
+ }
+
+ huc_fw->path = fw_path;
+ huc_fw->fetch_status = INTEL_UC_FIRMWARE_PENDING;
+
+ DRM_DEBUG_DRIVER("HuC firmware pending, path %s\n", fw_path);
+
+ WARN(huc_fw->path == NULL, "HuC present but no fw path\n");
+
+ intel_uc_fw_fetch(dev_priv, huc_fw);
+}
+
+/**
+ * intel_huc_load() - load HuC uCode to device
+ * @dev_priv: the drm_i915_private device
+ *
+ * Called from guc_setup() during driver loading and also after a GPU reset.
+ * Be note that HuC loading must be done before GuC loading.
+ *
+ * The firmware image should have already been fetched into memory by the
+ * earlier call to intel_huc_init(), so here we need only check that
+ * is succeeded, and then transfer the image to the h/w.
+ *
+ * Return: non-zero code on error
+ */
+int intel_huc_load(struct drm_i915_private *dev_priv)
+{
+ struct intel_uc_fw *huc_fw = &dev_priv->huc.fw;
+ int err;
+
+ if (huc_fw->fetch_status == INTEL_UC_FIRMWARE_NONE)
+ return 0;
+
+ DRM_DEBUG_DRIVER("%s fw status: fetch %s, load %s\n",
+ huc_fw->path,
+ intel_uc_fw_status_repr(huc_fw->fetch_status),
+ intel_uc_fw_status_repr(huc_fw->load_status));
+
+ if (huc_fw->fetch_status == INTEL_UC_FIRMWARE_SUCCESS &&
+ huc_fw->load_status == INTEL_UC_FIRMWARE_FAIL)
+ return -ENOEXEC;
+
+ huc_fw->load_status = INTEL_UC_FIRMWARE_PENDING;
+
+ switch (huc_fw->fetch_status) {
+ case INTEL_UC_FIRMWARE_FAIL:
+ /* something went wrong :( */
+ err = -EIO;
+ goto fail;
+
+ case INTEL_UC_FIRMWARE_NONE:
+ case INTEL_UC_FIRMWARE_PENDING:
+ default:
+ /* "can't happen" */
+ WARN_ONCE(1, "HuC fw %s invalid fetch_status %s [%d]\n",
+ huc_fw->path,
+ intel_uc_fw_status_repr(huc_fw->fetch_status),
+ huc_fw->fetch_status);
+ err = -ENXIO;
+ goto fail;
+
+ case INTEL_UC_FIRMWARE_SUCCESS:
+ break;
+ }
+
+ err = huc_ucode_xfer(dev_priv);
+ if (err)
+ goto fail;
+
+ huc_fw->load_status = INTEL_UC_FIRMWARE_SUCCESS;
+
+ DRM_DEBUG_DRIVER("%s fw status: fetch %s, load %s\n",
+ huc_fw->path,
+ intel_uc_fw_status_repr(huc_fw->fetch_status),
+ intel_uc_fw_status_repr(huc_fw->load_status));
+
+ return 0;
+
+fail:
+ if (huc_fw->load_status == INTEL_UC_FIRMWARE_PENDING)
+ huc_fw->load_status = INTEL_UC_FIRMWARE_FAIL;
+
+ DRM_ERROR("Failed to complete HuC uCode load with ret %d\n", err);
+
+ return err;
+}
+
+/**
+ * intel_huc_fini() - clean up resources allocated for HuC
+ * @dev_priv: the drm_i915_private device
+ *
+ * Cleans up by releasing the huc firmware GEM obj.
+ */
+void intel_huc_fini(struct drm_i915_private *dev_priv)
+{
+ struct intel_uc_fw *huc_fw = &dev_priv->huc.fw;
+
+ mutex_lock(&dev_priv->drm.struct_mutex);
+ if (huc_fw->obj)
+ i915_gem_object_put(huc_fw->obj);
+ huc_fw->obj = NULL;
+ mutex_unlock(&dev_priv->drm.struct_mutex);
+
+ huc_fw->fetch_status = INTEL_UC_FIRMWARE_NONE;
+}
+
@@ -176,6 +176,13 @@ struct intel_guc {
struct mutex send_mutex;
};
+struct intel_huc {
+ /* Generic uC firmware management */
+ struct intel_uc_fw fw;
+
+ /* HuC-specific additions */
+};
+
/* intel_uc.c */
void intel_uc_init_early(struct drm_i915_private *dev_priv);
int intel_guc_send(struct intel_guc *guc, const u32 *action, u32 len);
@@ -191,6 +198,8 @@ extern void intel_guc_fini(struct drm_i915_private *dev_priv);
extern const char *intel_uc_fw_status_repr(enum intel_uc_fw_status status);
extern int intel_guc_suspend(struct drm_i915_private *dev_priv);
extern int intel_guc_resume(struct drm_i915_private *dev_priv);
+void intel_uc_fw_fetch(struct drm_i915_private *dev_priv,
+ struct intel_uc_fw *uc_fw);
u32 intel_guc_wopcm_size(struct drm_i915_private *dev_priv);
/* i915_guc_submission.c */
@@ -214,4 +223,9 @@ static inline u32 guc_ggtt_offset(struct i915_vma *vma)
return offset;
}
+/* intel_huc_loader.c */
+void intel_huc_init(struct drm_i915_private *dev_priv);
+void intel_huc_fini(struct drm_i915_private *dev_priv);
+int intel_huc_load(struct drm_i915_private *dev_priv);
+
#endif
The HuC loading process is similar to GuC. The intel_uc_fw_fetch() is used for both cases. HuC loading needs to be before GuC loading. The WOPCM setting must be done early before loading any of them. v2: rebased on-top of drm-intel-nightly. removed if(HAS_GUC()) before the guc call. (D.Gordon) update huc_version number of format. v3: rebased to drm-intel-nightly, changed the file name format to match the one in the huc package. Changed dev->dev_private to to_i915() v4: moved function back to where it was. change wait_for_atomic to wait_for. v5: rebased + comment changes. v7: rebased. v8: rebased. v9: rebased. Changed the year in the copyright message to reflect the right year.Correct the comments,remove the unwanted WARN message, replace drm_gem_object_unreference() with i915_gem_object_put().Make the prototypes in intel_huc.h non-extern. v10: rebased. Update the file construction done by HuC. It is similar to GuC.Adopted the approach used in- https://patchwork.freedesktop.org/patch/104355/ <Tvrtko Ursulin> v11: Fix warnings remove old declaration v12: Change dev to dev_priv in macro definition. Corrected comments. v13: rebased. v14: rebased on top of drm-tip v15: rebased. Updated functions intel_huc_load(),intel_huc_init() and intel_uc_fw_fetch() to accept dev_priv instead of dev. Moved contents of intel_huc.h to intel_uc.h v16: change SKL_FW_ to SKL_HUC_FW_. Add intel_ prefix to guc_wopcm_size(). Remove unwanted checks in intel_uc.h. Rename huc_fw in struct intel_huc to simply fw to avoid redundency. v17: rebased. v18: rebased. Correct comments. v19: rebased. Correct comments. Make intel_huc_fini() accept dev_priv instead of dev like intel_huc_init() and intel_huc_load().Move definition to i915_guc_reg.h from intel_uc.h. Clean DMA_CTRL bits after HuC DMA transfer in huc_ucode_xfer() instead of guc_ucode_xfer(). Add suitable WARNs to give extra info. Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Tested-by: Xiang Haihao <haihao.xiang@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Alex Dai <yu.dai@intel.com> Signed-off-by: Peter Antoine <peter.antoine@intel.com> --- drivers/gpu/drm/i915/Makefile | 1 + drivers/gpu/drm/i915/i915_drv.c | 3 + drivers/gpu/drm/i915/i915_drv.h | 2 + drivers/gpu/drm/i915/i915_guc_reg.h | 6 + drivers/gpu/drm/i915/intel_guc_loader.c | 7 +- drivers/gpu/drm/i915/intel_huc_loader.c | 264 ++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_uc.h | 14 ++ 7 files changed, 294 insertions(+), 3 deletions(-) create mode 100644 drivers/gpu/drm/i915/intel_huc_loader.c