[07/10] drm/i915/psr: set PSR_MASK bits for deep sleep

Commit Message

vathsala nagaraju Jan. 11, 2017, 3:24 p.m. UTC

Program EDP_PSR_DEBUG_CTL (PSR_MASK) to enable system
to go to deep sleep while in psr2.PSR2_STATUS bit 31:28
should report value 8 , if system enters deep sleep state.

Also, EDP_FRAMES_BEFORE_SU_ENTRY is set 1 , if not set,
flickering is observed on psr2 panel.

v2: (Ilia Mirkin)
- Remove duplicate bit definition 25:27

v3: rebase

v4: rebase

Cc: Rodrigo Vivi <[e-mail]>
Cc: Jim Bride <[e-mail]>
Signed-off-by: Vathsala Nagaraju <[e-mail]>
Signed-off-by: Patil Deepti <[e-mail]>
Reviewed-by: Jim Bride <[e-mail]>
---
 drivers/gpu/drm/i915/i915_reg.h  | 10 +++++++---
 drivers/gpu/drm/i915/intel_psr.c | 31 ++++++++++++++++++++-----------
 2 files changed, 27 insertions(+), 14 deletions(-)

Patch

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 7a325fb..6ad9f06 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3597,9 +3597,12 @@  enum {
 #define   EDP_PSR_PERF_CNT_MASK		0xffffff
 
 #define EDP_PSR_DEBUG_CTL		_MMIO(dev_priv->psr_mmio_base + 0x60)
-#define   EDP_PSR_DEBUG_MASK_LPSP	(1<<27)
-#define   EDP_PSR_DEBUG_MASK_MEMUP	(1<<26)
-#define   EDP_PSR_DEBUG_MASK_HPD	(1<<25)
+#define   EDP_PSR_DEBUG_MASK_MAX_SLEEP         (1<<28)
+#define   EDP_PSR_DEBUG_MASK_LPSP              (1<<27)
+#define   EDP_PSR_DEBUG_MASK_MEMUP             (1<<26)
+#define   EDP_PSR_DEBUG_MASK_HPD               (1<<25)
+#define   EDP_PSR_DEBUG_MASK_DISP_REG_WRITE    (1<<16)
+#define   EDP_PSR_DEBUG_EXIT_ON_PIXEL_UNDERRUN (1<<15)
 
 #define EDP_PSR2_CTL			_MMIO(0x6f900)
 #define   EDP_PSR2_ENABLE		(1<<31)
@@ -3614,6 +3617,7 @@  enum {
 #define   EDP_PSR2_FRAME_BEFORE_SU_SHIFT 4
 #define   EDP_PSR2_FRAME_BEFORE_SU_MASK	(0xf<<4)
 #define   EDP_PSR2_IDLE_MASK		0xf
+#define   EDP_FRAMES_BEFORE_SU_ENTRY   (1<<4)
 
 #define EDP_PSR2_STATUS_CTL            _MMIO(0x6f940)
 #define EDP_PSR2_STATUS_STATE_MASK     (0xf<<28)
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index b582220..f9d620b 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -338,7 +338,9 @@  static void intel_enable_source_psr2(struct intel_dp *intel_dp)
 	/* FIXME: selective update is probably totally broken because it doesn't
 	 * mesh at all with our frontbuffer tracking. And the hw alone isn't
 	 * good enough. */
-	val |= EDP_PSR2_ENABLE | EDP_SU_TRACK_ENABLE;
+	val |= EDP_PSR2_ENABLE |
+		EDP_SU_TRACK_ENABLE |
+		EDP_FRAMES_BEFORE_SU_ENTRY;
 
 	if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 5)
 		val |= EDP_PSR2_TP2_TIME_2500;
@@ -510,20 +512,27 @@  void intel_psr_enable(struct intel_dp *intel_dp)
 			if (dev_priv->psr.y_cord_support)
 				chicken |= PSR2_ADD_VERTICAL_LINE_COUNT;
 			I915_WRITE(CHICKEN_TRANS(TRANS_EDP), chicken);
+			I915_WRITE(EDP_PSR_DEBUG_CTL,
+				   EDP_PSR_DEBUG_MASK_MEMUP |
+				   EDP_PSR_DEBUG_MASK_HPD |
+				   EDP_PSR_DEBUG_MASK_LPSP |
+				   EDP_PSR_DEBUG_MASK_MAX_SLEEP |
+				   EDP_PSR_DEBUG_MASK_DISP_REG_WRITE);
 		} else {
 			/* set up vsc header for psr1 */
 			hsw_psr_setup_vsc(intel_dp);
+			/*
+			 * Per Spec: Avoid continuous PSR exit by masking MEMUP
+			 * and HPD. also mask LPSP to avoid dependency on other
+			 * drivers that might block runtime_pm besides
+			 * preventing  other hw tracking issues now we can rely
+			 * on frontbuffer tracking.
+			 */
+			I915_WRITE(EDP_PSR_DEBUG_CTL,
+				   EDP_PSR_DEBUG_MASK_MEMUP |
+				   EDP_PSR_DEBUG_MASK_HPD |
+				   EDP_PSR_DEBUG_MASK_LPSP);
 		}
-
-		/*
-		 * Per Spec: Avoid continuous PSR exit by masking MEMUP and HPD.
-		 * Also mask LPSP to avoid dependency on other drivers that
-		 * might block runtime_pm besides preventing other hw tracking
-		 * issues now we can rely on frontbuffer tracking.
-		 */
-		I915_WRITE(EDP_PSR_DEBUG_CTL, EDP_PSR_DEBUG_MASK_MEMUP |
-			   EDP_PSR_DEBUG_MASK_HPD | EDP_PSR_DEBUG_MASK_LPSP);
-
 		/* Enable PSR on the panel */
 		hsw_psr_enable_sink(intel_dp);