| Message ID | 1484806272-29641-1-git-send-email-vidya.srinivas@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, 2017-01-19 at 11:41 +0530, Vidya Srinivas wrote: > From: Uma Shankar <uma.shankar@intel.com> > > Enable MIPI IO WA for BXT DSI as per bspec and > program the DSI regulators. > > v2: Moved IO enable to pre-enable as per Mika's > review comments. Also reused the existing register > definition for BXT_P_CR_GT_DISP_PWRON. > > v3: Added Programming the DSI regulators as per disable/enable > sequences. > > Signed-off-by: Uma Shankar <uma.shankar@intel.com> > --- > drivers/gpu/drm/i915/i915_reg.h | 7 +++++++ > drivers/gpu/drm/i915/intel_dsi.c | 21 +++++++++++++++++++++ > 2 files changed, 28 insertions(+) > > diff --git a/drivers/gpu/drm/i915/i915_reg.h > b/drivers/gpu/drm/i915/i915_reg.h > index 00970aa..0a9ad44 100644 > --- a/drivers/gpu/drm/i915/i915_reg.h > +++ b/drivers/gpu/drm/i915/i915_reg.h > @@ -1553,6 +1553,7 @@ enum skl_disp_power_wells { > _MMIO(_BXT_PHY_CH(phy, ch, reg_ch0, reg_ch1)) > > #define BXT_P_CR_GT_DISP_PWRON _MMIO(0x138090) > +#define MIPIO_RST_CTRL (1 << 2) > > #define _BXT_PHY_CTL_DDI_A 0x64C00 > #define _BXT_PHY_CTL_DDI_B 0x64C10 > @@ -8301,6 +8302,12 @@ enum { > #define _BXT_MIPIC_PORT_CTRL 0x6B8C0 > #define BXT_MIPI_PORT_CTRL(tc) _MMIO_MIPI(tc, > _BXT_MIPIA_PORT_CTRL, _BXT_MIPIC_PORT_CTRL) > > +#define BXT_P_DSI_REGULATOR_CFG _MMIO(0x16002 > 0) > +#define STAP_SELECT (1 << 0) > + > +#define BXT_P_DSI_REGULATOR_TX_CTRL _MMIO(0x160054) > +#define HS_IO_CTRL_SELECT (1 << 0) > + > #define DPI_ENABLE (1 << 31) > /* A + C */ > #define MIPIA_MIPI4DPHY_DELAY_COUNT_SHIFT 27 > #define MIPIA_MIPI4DPHY_DELAY_COUNT_MASK (0xf << 27) > diff --git a/drivers/gpu/drm/i915/intel_dsi.c > b/drivers/gpu/drm/i915/intel_dsi.c > index 16732e7..043441e 100644 > --- a/drivers/gpu/drm/i915/intel_dsi.c > +++ b/drivers/gpu/drm/i915/intel_dsi.c > @@ -548,6 +548,7 @@ static void intel_dsi_pre_enable(struct > intel_encoder *encoder, > struct drm_i915_private *dev_priv = to_i915(encoder- > >base.dev); > struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder- > >base); > enum port port; > + u32 val; > > DRM_DEBUG_KMS("\n"); > > @@ -558,6 +559,11 @@ static void intel_dsi_pre_enable(struct > intel_encoder *encoder, > intel_disable_dsi_pll(encoder); > intel_enable_dsi_pll(encoder, pipe_config); > > + /* Add MIPI IO reset programming for modeset */ > + val = I915_READ(BXT_P_CR_GT_DISP_PWRON); > + I915_WRITE(BXT_P_CR_GT_DISP_PWRON, > + val | MIPIO_RST_CTRL); > + Looking good but overall we still need to address Jani's comment to limit these changes only to Broxton platform. > intel_dsi_prepare(encoder, pipe_config); > > /* Panel Enable over CRC PMIC */ > @@ -575,6 +581,12 @@ static void intel_dsi_pre_enable(struct > intel_encoder *encoder, > I915_WRITE(DSPCLK_GATE_D, val); > } > > + /* Power up DSI regulator */ > + I915_WRITE(BXT_P_DSI_REGULATOR_CFG, STAP_SELECT); > + val = I915_READ(BXT_P_DSI_REGULATOR_TX_CTRL); > + val &= ~HS_IO_CTRL_SELECT; > + I915_WRITE(BXT_P_DSI_REGULATOR_TX_CTRL, val); > + /* put device in ready state */ > intel_dsi_device_ready(encoder); > > @@ -707,6 +719,7 @@ static void intel_dsi_post_disable(struct > intel_encoder *encoder, > { > struct drm_i915_private *dev_priv = to_i915(encoder- > >base.dev); > struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder- > >base); > + u32 val; > > DRM_DEBUG_KMS("\n"); > > @@ -714,8 +727,16 @@ static void intel_dsi_post_disable(struct > intel_encoder *encoder, > > intel_dsi_clear_device_ready(encoder); > > + val = I915_READ(BXT_P_CR_GT_DISP_PWRON); > + I915_WRITE(BXT_P_CR_GT_DISP_PWRON, > + val & ~MIPIO_RST_CTRL); > + > intel_disable_dsi_pll(encoder); > > + /* Power down DSI regulator to save power */ > + I915_WRITE(BXT_P_DSI_REGULATOR_CFG, STAP_SELECT); > + I915_WRITE(BXT_P_DSI_REGULATOR_TX_CTRL, HS_IO_CTRL_SELECT); > + > if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { > u32 val; >
On Thu, 19 Jan 2017, Mika Kahola <mika.kahola@intel.com> wrote: > On Thu, 2017-01-19 at 11:41 +0530, Vidya Srinivas wrote: >> From: Uma Shankar <uma.shankar@intel.com> >> >> Enable MIPI IO WA for BXT DSI as per bspec and >> program the DSI regulators. >> >> v2: Moved IO enable to pre-enable as per Mika's >> review comments. Also reused the existing register >> definition for BXT_P_CR_GT_DISP_PWRON. >> >> v3: Added Programming the DSI regulators as per disable/enable >> sequences. >> >> Signed-off-by: Uma Shankar <uma.shankar@intel.com> >> --- >> drivers/gpu/drm/i915/i915_reg.h | 7 +++++++ >> drivers/gpu/drm/i915/intel_dsi.c | 21 +++++++++++++++++++++ >> 2 files changed, 28 insertions(+) >> >> diff --git a/drivers/gpu/drm/i915/i915_reg.h >> b/drivers/gpu/drm/i915/i915_reg.h >> index 00970aa..0a9ad44 100644 >> --- a/drivers/gpu/drm/i915/i915_reg.h >> +++ b/drivers/gpu/drm/i915/i915_reg.h >> @@ -1553,6 +1553,7 @@ enum skl_disp_power_wells { >> _MMIO(_BXT_PHY_CH(phy, ch, reg_ch0, reg_ch1)) >> >> #define BXT_P_CR_GT_DISP_PWRON _MMIO(0x138090) >> +#define MIPIO_RST_CTRL (1 << 2) >> >> #define _BXT_PHY_CTL_DDI_A 0x64C00 >> #define _BXT_PHY_CTL_DDI_B 0x64C10 >> @@ -8301,6 +8302,12 @@ enum { >> #define _BXT_MIPIC_PORT_CTRL 0x6B8C0 >> #define BXT_MIPI_PORT_CTRL(tc) _MMIO_MIPI(tc, >> _BXT_MIPIA_PORT_CTRL, _BXT_MIPIC_PORT_CTRL) >> >> +#define BXT_P_DSI_REGULATOR_CFG _MMIO(0x16002 >> 0) >> +#define STAP_SELECT (1 << 0) >> + >> +#define BXT_P_DSI_REGULATOR_TX_CTRL _MMIO(0x160054) >> +#define HS_IO_CTRL_SELECT (1 << 0) >> + >> #define DPI_ENABLE (1 << 31) >> /* A + C */ >> #define MIPIA_MIPI4DPHY_DELAY_COUNT_SHIFT 27 >> #define MIPIA_MIPI4DPHY_DELAY_COUNT_MASK (0xf << 27) >> diff --git a/drivers/gpu/drm/i915/intel_dsi.c >> b/drivers/gpu/drm/i915/intel_dsi.c >> index 16732e7..043441e 100644 >> --- a/drivers/gpu/drm/i915/intel_dsi.c >> +++ b/drivers/gpu/drm/i915/intel_dsi.c >> @@ -548,6 +548,7 @@ static void intel_dsi_pre_enable(struct >> intel_encoder *encoder, >> struct drm_i915_private *dev_priv = to_i915(encoder- >> >base.dev); >> struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder- >> >base); >> enum port port; >> + u32 val; >> >> DRM_DEBUG_KMS("\n"); >> >> @@ -558,6 +559,11 @@ static void intel_dsi_pre_enable(struct >> intel_encoder *encoder, >> intel_disable_dsi_pll(encoder); >> intel_enable_dsi_pll(encoder, pipe_config); >> >> + /* Add MIPI IO reset programming for modeset */ >> + val = I915_READ(BXT_P_CR_GT_DISP_PWRON); >> + I915_WRITE(BXT_P_CR_GT_DISP_PWRON, >> + val | MIPIO_RST_CTRL); >> + > Looking good but overall we still need to address Jani's comment to > limit these changes only to Broxton platform. Please don't send this in reply to the current thread... BR, Jani. > >> intel_dsi_prepare(encoder, pipe_config); >> >> /* Panel Enable over CRC PMIC */ >> @@ -575,6 +581,12 @@ static void intel_dsi_pre_enable(struct >> intel_encoder *encoder, >> I915_WRITE(DSPCLK_GATE_D, val); >> } >> >> + /* Power up DSI regulator */ >> + I915_WRITE(BXT_P_DSI_REGULATOR_CFG, STAP_SELECT); >> + val = I915_READ(BXT_P_DSI_REGULATOR_TX_CTRL); >> + val &= ~HS_IO_CTRL_SELECT; >> + I915_WRITE(BXT_P_DSI_REGULATOR_TX_CTRL, val); >> + /* put device in ready state */ >> intel_dsi_device_ready(encoder); >> >> @@ -707,6 +719,7 @@ static void intel_dsi_post_disable(struct >> intel_encoder *encoder, >> { >> struct drm_i915_private *dev_priv = to_i915(encoder- >> >base.dev); >> struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder- >> >base); >> + u32 val; >> >> DRM_DEBUG_KMS("\n"); >> >> @@ -714,8 +727,16 @@ static void intel_dsi_post_disable(struct >> intel_encoder *encoder, >> >> intel_dsi_clear_device_ready(encoder); >> >> + val = I915_READ(BXT_P_CR_GT_DISP_PWRON); >> + I915_WRITE(BXT_P_CR_GT_DISP_PWRON, >> + val & ~MIPIO_RST_CTRL); >> + >> intel_disable_dsi_pll(encoder); >> >> + /* Power down DSI regulator to save power */ >> + I915_WRITE(BXT_P_DSI_REGULATOR_CFG, STAP_SELECT); >> + I915_WRITE(BXT_P_DSI_REGULATOR_TX_CTRL, HS_IO_CTRL_SELECT); >> + >> if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { >> u32 val; >>
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 00970aa..0a9ad44 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1553,6 +1553,7 @@ enum skl_disp_power_wells { _MMIO(_BXT_PHY_CH(phy, ch, reg_ch0, reg_ch1)) #define BXT_P_CR_GT_DISP_PWRON _MMIO(0x138090) +#define MIPIO_RST_CTRL (1 << 2) #define _BXT_PHY_CTL_DDI_A 0x64C00 #define _BXT_PHY_CTL_DDI_B 0x64C10 @@ -8301,6 +8302,12 @@ enum { #define _BXT_MIPIC_PORT_CTRL 0x6B8C0 #define BXT_MIPI_PORT_CTRL(tc) _MMIO_MIPI(tc, _BXT_MIPIA_PORT_CTRL, _BXT_MIPIC_PORT_CTRL) +#define BXT_P_DSI_REGULATOR_CFG _MMIO(0x160020) +#define STAP_SELECT (1 << 0) + +#define BXT_P_DSI_REGULATOR_TX_CTRL _MMIO(0x160054) +#define HS_IO_CTRL_SELECT (1 << 0) + #define DPI_ENABLE (1 << 31) /* A + C */ #define MIPIA_MIPI4DPHY_DELAY_COUNT_SHIFT 27 #define MIPIA_MIPI4DPHY_DELAY_COUNT_MASK (0xf << 27) diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index 16732e7..043441e 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -548,6 +548,7 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder, struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); enum port port; + u32 val; DRM_DEBUG_KMS("\n"); @@ -558,6 +559,11 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder, intel_disable_dsi_pll(encoder); intel_enable_dsi_pll(encoder, pipe_config); + /* Add MIPI IO reset programming for modeset */ + val = I915_READ(BXT_P_CR_GT_DISP_PWRON); + I915_WRITE(BXT_P_CR_GT_DISP_PWRON, + val | MIPIO_RST_CTRL); + intel_dsi_prepare(encoder, pipe_config); /* Panel Enable over CRC PMIC */ @@ -575,6 +581,12 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder, I915_WRITE(DSPCLK_GATE_D, val); } + /* Power up DSI regulator */ + I915_WRITE(BXT_P_DSI_REGULATOR_CFG, STAP_SELECT); + val = I915_READ(BXT_P_DSI_REGULATOR_TX_CTRL); + val &= ~HS_IO_CTRL_SELECT; + I915_WRITE(BXT_P_DSI_REGULATOR_TX_CTRL, val); + /* put device in ready state */ intel_dsi_device_ready(encoder); @@ -707,6 +719,7 @@ static void intel_dsi_post_disable(struct intel_encoder *encoder, { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + u32 val; DRM_DEBUG_KMS("\n"); @@ -714,8 +727,16 @@ static void intel_dsi_post_disable(struct intel_encoder *encoder, intel_dsi_clear_device_ready(encoder); + val = I915_READ(BXT_P_CR_GT_DISP_PWRON); + I915_WRITE(BXT_P_CR_GT_DISP_PWRON, + val & ~MIPIO_RST_CTRL); + intel_disable_dsi_pll(encoder); + /* Power down DSI regulator to save power */ + I915_WRITE(BXT_P_DSI_REGULATOR_CFG, STAP_SELECT); + I915_WRITE(BXT_P_DSI_REGULATOR_TX_CTRL, HS_IO_CTRL_SELECT); + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { u32 val;