| Message ID | 1487078180-15147-4-git-send-email-madhav.chauhan@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, 14 Feb 2017, Madhav Chauhan <madhav.chauhan@intel.com> wrote: > From: Deepak M <m.deepak@intel.com> > > v2: Addressed Jani's Review comments(renamed bit field macros) > v3: Jani's Review comment for aligning code to platforms and added > wrapper functions. > v4: Corrected enable/disable seuqence as per BSPEC > > Signed-off-by: Deepak M <m.deepak@intel.com> > Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> > --- > drivers/gpu/drm/i915/intel_dsi.c | 206 ++++++++++++++++++++++++++++++++++++--- > 1 file changed, 195 insertions(+), 11 deletions(-) > > diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c > index 03d0999..a72a10f 100644 > --- a/drivers/gpu/drm/i915/intel_dsi.c > +++ b/drivers/gpu/drm/i915/intel_dsi.c > @@ -357,6 +357,109 @@ static bool intel_dsi_compute_config(struct intel_encoder *encoder, > return true; > } > > +static void glk_dsi_device_ready(struct intel_encoder *encoder) > +{ > + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); > + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); > + enum port port; > + u32 tmp, val; > + > + /* Set the MIPI mode > + * If MIPI_Mode is off, then writing to LP_Wake bit is not reflecting. > + * Power ON MIPI IO first and then write into IO reset and LP wake bits > + */ > + for_each_dsi_port(port, intel_dsi->ports) { > + tmp = I915_READ(MIPI_CTRL(port)); > + I915_WRITE(MIPI_CTRL(port), tmp | GLK_MIPIIO_ENABLE); > + } > + > + /* Put the IO into reset */ > + tmp = I915_READ(MIPI_CTRL(PORT_A)); > + tmp &= ~GLK_MIPIIO_RESET_RELEASED; > + I915_WRITE(MIPI_CTRL(PORT_A), tmp); > + > + /* Program LP Wake */ > + for_each_dsi_port(port, intel_dsi->ports) { > + tmp = I915_READ(MIPI_CTRL(port)); > + tmp |= GLK_LP_WAKE; > + I915_WRITE(MIPI_CTRL(port), tmp); > + } > + > + /* Wait for Pwr ACK */ > + for_each_dsi_port(port, intel_dsi->ports) { > + if (intel_wait_for_register(dev_priv, > + MIPI_CTRL(port), GLK_MIPIIO_PORT_POWERED, > + GLK_MIPIIO_PORT_POWERED, 20)) > + DRM_ERROR("Power ACK not received\n"); > + } > + > + /* Wait for MIPI PHY status bit to set */ > + for_each_dsi_port(port, intel_dsi->ports) { > + if (intel_wait_for_register(dev_priv, > + MIPI_CTRL(port), GLK_MIPIIO_PORT_POWERED, > + GLK_MIPIIO_PORT_POWERED, 20)) > + DRM_ERROR("PHY is not ON\n"); > + } You have the same wait twice here, with different comments and error messages. > + > + /* Get IO out of reset */ > + tmp = I915_READ(MIPI_CTRL(PORT_A)); > + I915_WRITE(MIPI_CTRL(PORT_A), tmp | GLK_MIPIIO_RESET_RELEASED); > + > + /* Get IO out of Low power state*/ > + for_each_dsi_port(port, intel_dsi->ports) { > + if (!(I915_READ(MIPI_DEVICE_READY(port)) & DEVICE_READY)) { > + val = I915_READ(MIPI_DEVICE_READY(port)); > + val &= ~ULPS_STATE_MASK; > + val |= DEVICE_READY; > + I915_WRITE(MIPI_DEVICE_READY(port), val); > + usleep_range(10, 15); > + } > + > + /* Enter ULPS */ > + val = I915_READ(MIPI_DEVICE_READY(port)); > + val &= ~ULPS_STATE_MASK; > + val |= (ULPS_STATE_ENTER | DEVICE_READY); > + I915_WRITE(MIPI_DEVICE_READY(port), val); > + > + /* Wait for ULPS Not active */ > + if (intel_wait_for_register(dev_priv, > + MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE, > + GLK_ULPS_NOT_ACTIVE, 20)) > + > + /* Exit ULPS */ > + val = I915_READ(MIPI_DEVICE_READY(port)); > + val &= ~ULPS_STATE_MASK; > + val |= (ULPS_STATE_EXIT | DEVICE_READY); > + I915_WRITE(MIPI_DEVICE_READY(port), val); > + > + /* Enter Normal Mode */ > + val = I915_READ(MIPI_DEVICE_READY(port)); > + val &= ~ULPS_STATE_MASK; > + val |= (ULPS_STATE_NORMAL_OPERATION | DEVICE_READY); > + I915_WRITE(MIPI_DEVICE_READY(port), val); > + > + tmp = I915_READ(MIPI_CTRL(port)); > + tmp &= ~GLK_LP_WAKE; > + I915_WRITE(MIPI_CTRL(port), tmp); > + } > + > + /* Wait for Stop state */ > + for_each_dsi_port(port, intel_dsi->ports) { > + if (intel_wait_for_register(dev_priv, > + MIPI_CTRL(port), GLK_DATA_LANE_STOP_STATE, > + GLK_DATA_LANE_STOP_STATE, 20)) > + DRM_ERROR("Date lane not in STOP state\n"); > + } > + > + /* Wait for AFE LATCH */ > + for_each_dsi_port(port, intel_dsi->ports) { > + if (intel_wait_for_register(dev_priv, > + BXT_MIPI_PORT_CTRL(port), AFE_LATCHOUT, > + AFE_LATCHOUT, 20)) > + DRM_ERROR("D-PHY not entering LP-11 state\n"); > + } > +} > + > static void bxt_dsi_device_ready(struct intel_encoder *encoder) > { > struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); > @@ -442,8 +545,10 @@ static void intel_dsi_device_ready(struct intel_encoder *encoder) > > if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) > vlv_dsi_device_ready(encoder); > - else if (IS_GEN9_LP(dev_priv)) > + else if (IS_BROXTON(dev_priv)) > bxt_dsi_device_ready(encoder); > + else if (IS_GEMINILAKE(dev_priv)) > + glk_dsi_device_ready(encoder); > } > > static void intel_dsi_port_enable(struct intel_encoder *encoder) > @@ -649,18 +754,20 @@ static void intel_dsi_disable(struct intel_encoder *encoder) > msleep(2); > } > > - for_each_dsi_port(port, intel_dsi->ports) { > - /* Panel commands can be sent when clock is in LP11 */ > - I915_WRITE(MIPI_DEVICE_READY(port), 0x0); > + if (!IS_GEMINILAKE(dev_priv)) { > + for_each_dsi_port(port, intel_dsi->ports) { > + /* Panel commands can be sent when clock is in LP11 */ > + I915_WRITE(MIPI_DEVICE_READY(port), 0x0); > > - intel_dsi_reset_clocks(encoder, port); > - I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP); > + intel_dsi_reset_clocks(encoder, port); > + I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP); > > - temp = I915_READ(MIPI_DSI_FUNC_PRG(port)); > - temp &= ~VID_MODE_FORMAT_MASK; > - I915_WRITE(MIPI_DSI_FUNC_PRG(port), temp); > + temp = I915_READ(MIPI_DSI_FUNC_PRG(port)); > + temp &= ~VID_MODE_FORMAT_MASK; > + I915_WRITE(MIPI_DSI_FUNC_PRG(port), temp); > > - I915_WRITE(MIPI_DEVICE_READY(port), 0x1); > + I915_WRITE(MIPI_DEVICE_READY(port), 0x1); > + } > } > /* if disable packets are sent before sending shutdown packet then in > * some next enable sequence send turn on packet error is observed */ > @@ -670,7 +777,73 @@ static void intel_dsi_disable(struct intel_encoder *encoder) > wait_for_dsi_fifo_empty(intel_dsi, port); > } > > -static void intel_dsi_clear_device_ready(struct intel_encoder *encoder) > +static void glk_dsi_enter_low_power_mode(struct intel_encoder *encoder) > +{ > + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); > + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); > + enum port port; > + u32 val; > + > + /* Enter ULPS */ > + for_each_dsi_port(port, intel_dsi->ports) { > + val = I915_READ(MIPI_DEVICE_READY(port)); > + val &= ~ULPS_STATE_MASK; > + val |= (ULPS_STATE_ENTER | DEVICE_READY); > + I915_WRITE(MIPI_DEVICE_READY(port), val); > + } > + > + /* Wait for MIPI PHY status bit to unset */ > + for_each_dsi_port(port, intel_dsi->ports) { > + if (intel_wait_for_register(dev_priv, > + MIPI_CTRL(port), > + GLK_PHY_STATUS_PORT_READY, 0, 20)) > + DRM_ERROR("PHY is not turning OFF\n"); > + } > + > + /* Wait for Pwr ACK bit to unset */ > + for_each_dsi_port(port, intel_dsi->ports) { > + if (intel_wait_for_register(dev_priv, > + MIPI_CTRL(port), > + GLK_MIPIIO_PORT_POWERED, 0, 20)) > + DRM_ERROR("MIPI IO Port is not powergated\n"); > + } > +} > + > +static void glk_dsi_disable_mipi_io(struct intel_encoder *encoder) > +{ > + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); > + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); > + enum port port; > + u32 tmp; > + > + /* Put the IO into reset */ > + tmp = I915_READ(MIPI_CTRL(PORT_A)); > + tmp &= ~GLK_MIPIIO_RESET_RELEASED; > + I915_WRITE(MIPI_CTRL(PORT_A), tmp); > + > + /* Wait for MIPI PHY status bit to unset */ > + for_each_dsi_port(port, intel_dsi->ports) { > + if (intel_wait_for_register(dev_priv, > + MIPI_CTRL(port), > + GLK_PHY_STATUS_PORT_READY, 0, 20)) > + DRM_ERROR("PHY is not turning OFF\n"); > + } > + > + /* Clear MIPI mode */ > + for_each_dsi_port(port, intel_dsi->ports) { > + tmp = I915_READ(MIPI_CTRL(port)); > + tmp &= ~GLK_MIPIIO_ENABLE; > + I915_WRITE(MIPI_CTRL(port), tmp); > + } > +} > + > +static void glk_dsi_clear_device_ready(struct intel_encoder *encoder) > +{ > + glk_dsi_enter_low_power_mode(encoder); > + glk_dsi_disable_mipi_io(encoder); > +} > + > +static void vlv_dsi_clear_device_ready(struct intel_encoder *encoder) > { > struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); > struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); > @@ -713,6 +886,17 @@ static void intel_dsi_clear_device_ready(struct intel_encoder *encoder) > } > } > > +static void intel_dsi_clear_device_ready(struct intel_encoder *encoder) > +{ > + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); > + > + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv) || > + IS_BROXTON(dev_priv)) > + vlv_dsi_clear_device_ready(encoder); > + else if (IS_GEMINILAKE(dev_priv)) > + glk_dsi_clear_device_ready(encoder); > +} > + > static void intel_dsi_post_disable(struct intel_encoder *encoder, > struct intel_crtc_state *pipe_config, > struct drm_connector_state *conn_state)
> -----Original Message----- > From: Nikula, Jani > Sent: Thursday, February 16, 2017 8:38 PM > To: Chauhan, Madhav <madhav.chauhan@intel.com>; intel- > gfx@lists.freedesktop.org > Cc: Conselvan De Oliveira, Ander <ander.conselvan.de.oliveira@intel.com>; > Shankar, Uma <uma.shankar@intel.com>; Mukherjee, Indranil > <indranil.mukherjee@intel.com>; Saarinen, Jani <jani.saarinen@intel.com>; > Kamath, Sunil <sunil.kamath@intel.com>; Deepak M > <m.deepak@intel.com>; Chauhan, Madhav <madhav.chauhan@intel.com> > Subject: Re: [GLK MIPI DSI V5 3/8] drm/i915/glk: Add MIPIIO Enable/disable > sequence > > On Tue, 14 Feb 2017, Madhav Chauhan <madhav.chauhan@intel.com> > wrote: > > From: Deepak M <m.deepak@intel.com> > > > > v2: Addressed Jani's Review comments(renamed bit field macros) > > v3: Jani's Review comment for aligning code to platforms and added > > wrapper functions. > > v4: Corrected enable/disable seuqence as per BSPEC > > > > Signed-off-by: Deepak M <m.deepak@intel.com> > > Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> > > --- > > drivers/gpu/drm/i915/intel_dsi.c | 206 > > ++++++++++++++++++++++++++++++++++++--- > > 1 file changed, 195 insertions(+), 11 deletions(-) > > > > diff --git a/drivers/gpu/drm/i915/intel_dsi.c > > b/drivers/gpu/drm/i915/intel_dsi.c > > index 03d0999..a72a10f 100644 > > --- a/drivers/gpu/drm/i915/intel_dsi.c > > +++ b/drivers/gpu/drm/i915/intel_dsi.c > > @@ -357,6 +357,109 @@ static bool intel_dsi_compute_config(struct > intel_encoder *encoder, > > return true; > > } > > > > +static void glk_dsi_device_ready(struct intel_encoder *encoder) { > > + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); > > + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); > > + enum port port; > > + u32 tmp, val; > > + > > + /* Set the MIPI mode > > + * If MIPI_Mode is off, then writing to LP_Wake bit is not reflecting. > > + * Power ON MIPI IO first and then write into IO reset and LP wake > bits > > + */ > > + for_each_dsi_port(port, intel_dsi->ports) { > > + tmp = I915_READ(MIPI_CTRL(port)); > > + I915_WRITE(MIPI_CTRL(port), tmp | GLK_MIPIIO_ENABLE); > > + } > > + > > + /* Put the IO into reset */ > > + tmp = I915_READ(MIPI_CTRL(PORT_A)); > > + tmp &= ~GLK_MIPIIO_RESET_RELEASED; > > + I915_WRITE(MIPI_CTRL(PORT_A), tmp); > > + > > + /* Program LP Wake */ > > + for_each_dsi_port(port, intel_dsi->ports) { > > + tmp = I915_READ(MIPI_CTRL(port)); > > + tmp |= GLK_LP_WAKE; > > + I915_WRITE(MIPI_CTRL(port), tmp); > > + } > > + > > + /* Wait for Pwr ACK */ > > + for_each_dsi_port(port, intel_dsi->ports) { > > + if (intel_wait_for_register(dev_priv, > > + MIPI_CTRL(port), > GLK_MIPIIO_PORT_POWERED, > > + GLK_MIPIIO_PORT_POWERED, 20)) > > + DRM_ERROR("Power ACK not received\n"); > > + } > > + > > + /* Wait for MIPI PHY status bit to set */ > > + for_each_dsi_port(port, intel_dsi->ports) { > > + if (intel_wait_for_register(dev_priv, > > + MIPI_CTRL(port), > GLK_MIPIIO_PORT_POWERED, > > + GLK_MIPIIO_PORT_POWERED, 20)) > > + DRM_ERROR("PHY is not ON\n"); > > + } > > You have the same wait twice here, with different comments and error > messages. Right. Second wait has to be done for PHY STATUS bit. Looks like it got messed up when I renamed the bit definitions. Will correct it. Thanks for pointing out. > > > + > > + /* Get IO out of reset */ > > + tmp = I915_READ(MIPI_CTRL(PORT_A)); > > + I915_WRITE(MIPI_CTRL(PORT_A), tmp | > GLK_MIPIIO_RESET_RELEASED); > > + > > + /* Get IO out of Low power state*/ > > + for_each_dsi_port(port, intel_dsi->ports) { > > + if (!(I915_READ(MIPI_DEVICE_READY(port)) & > DEVICE_READY)) { > > + val = I915_READ(MIPI_DEVICE_READY(port)); > > + val &= ~ULPS_STATE_MASK; > > + val |= DEVICE_READY; > > + I915_WRITE(MIPI_DEVICE_READY(port), val); > > + usleep_range(10, 15); > > + } > > + > > + /* Enter ULPS */ > > + val = I915_READ(MIPI_DEVICE_READY(port)); > > + val &= ~ULPS_STATE_MASK; > > + val |= (ULPS_STATE_ENTER | DEVICE_READY); > > + I915_WRITE(MIPI_DEVICE_READY(port), val); > > + > > + /* Wait for ULPS Not active */ > > + if (intel_wait_for_register(dev_priv, > > + MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE, > > + GLK_ULPS_NOT_ACTIVE, 20)) > > + > > + /* Exit ULPS */ > > + val = I915_READ(MIPI_DEVICE_READY(port)); > > + val &= ~ULPS_STATE_MASK; > > + val |= (ULPS_STATE_EXIT | DEVICE_READY); > > + I915_WRITE(MIPI_DEVICE_READY(port), val); > > + > > + /* Enter Normal Mode */ > > + val = I915_READ(MIPI_DEVICE_READY(port)); > > + val &= ~ULPS_STATE_MASK; > > + val |= (ULPS_STATE_NORMAL_OPERATION | DEVICE_READY); > > + I915_WRITE(MIPI_DEVICE_READY(port), val); > > + > > + tmp = I915_READ(MIPI_CTRL(port)); > > + tmp &= ~GLK_LP_WAKE; > > + I915_WRITE(MIPI_CTRL(port), tmp); > > + } > > + > > + /* Wait for Stop state */ > > + for_each_dsi_port(port, intel_dsi->ports) { > > + if (intel_wait_for_register(dev_priv, > > + MIPI_CTRL(port), > GLK_DATA_LANE_STOP_STATE, > > + GLK_DATA_LANE_STOP_STATE, 20)) > > + DRM_ERROR("Date lane not in STOP state\n"); > > + } > > + > > + /* Wait for AFE LATCH */ > > + for_each_dsi_port(port, intel_dsi->ports) { > > + if (intel_wait_for_register(dev_priv, > > + BXT_MIPI_PORT_CTRL(port), AFE_LATCHOUT, > > + AFE_LATCHOUT, 20)) > > + DRM_ERROR("D-PHY not entering LP-11 state\n"); > > + } > > +} > > + > > static void bxt_dsi_device_ready(struct intel_encoder *encoder) { > > struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); > @@ > > -442,8 +545,10 @@ static void intel_dsi_device_ready(struct > > intel_encoder *encoder) > > > > if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) > > vlv_dsi_device_ready(encoder); > > - else if (IS_GEN9_LP(dev_priv)) > > + else if (IS_BROXTON(dev_priv)) > > bxt_dsi_device_ready(encoder); > > + else if (IS_GEMINILAKE(dev_priv)) > > + glk_dsi_device_ready(encoder); > > } > > > > static void intel_dsi_port_enable(struct intel_encoder *encoder) @@ > > -649,18 +754,20 @@ static void intel_dsi_disable(struct intel_encoder > *encoder) > > msleep(2); > > } > > > > - for_each_dsi_port(port, intel_dsi->ports) { > > - /* Panel commands can be sent when clock is in LP11 */ > > - I915_WRITE(MIPI_DEVICE_READY(port), 0x0); > > + if (!IS_GEMINILAKE(dev_priv)) { > > + for_each_dsi_port(port, intel_dsi->ports) { > > + /* Panel commands can be sent when clock is in LP11 > */ > > + I915_WRITE(MIPI_DEVICE_READY(port), 0x0); > > > > - intel_dsi_reset_clocks(encoder, port); > > - I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP); > > + intel_dsi_reset_clocks(encoder, port); > > + I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP); > > > > - temp = I915_READ(MIPI_DSI_FUNC_PRG(port)); > > - temp &= ~VID_MODE_FORMAT_MASK; > > - I915_WRITE(MIPI_DSI_FUNC_PRG(port), temp); > > + temp = I915_READ(MIPI_DSI_FUNC_PRG(port)); > > + temp &= ~VID_MODE_FORMAT_MASK; > > + I915_WRITE(MIPI_DSI_FUNC_PRG(port), temp); > > > > - I915_WRITE(MIPI_DEVICE_READY(port), 0x1); > > + I915_WRITE(MIPI_DEVICE_READY(port), 0x1); > > + } > > } > > /* if disable packets are sent before sending shutdown packet then in > > * some next enable sequence send turn on packet error is observed > > */ @@ -670,7 +777,73 @@ static void intel_dsi_disable(struct > intel_encoder *encoder) > > wait_for_dsi_fifo_empty(intel_dsi, port); } > > > > -static void intel_dsi_clear_device_ready(struct intel_encoder > > *encoder) > > +static void glk_dsi_enter_low_power_mode(struct intel_encoder > > +*encoder) { > > + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); > > + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); > > + enum port port; > > + u32 val; > > + > > + /* Enter ULPS */ > > + for_each_dsi_port(port, intel_dsi->ports) { > > + val = I915_READ(MIPI_DEVICE_READY(port)); > > + val &= ~ULPS_STATE_MASK; > > + val |= (ULPS_STATE_ENTER | DEVICE_READY); > > + I915_WRITE(MIPI_DEVICE_READY(port), val); > > + } > > + > > + /* Wait for MIPI PHY status bit to unset */ > > + for_each_dsi_port(port, intel_dsi->ports) { > > + if (intel_wait_for_register(dev_priv, > > + MIPI_CTRL(port), > > + GLK_PHY_STATUS_PORT_READY, 0, > 20)) > > + DRM_ERROR("PHY is not turning OFF\n"); > > + } > > + > > + /* Wait for Pwr ACK bit to unset */ > > + for_each_dsi_port(port, intel_dsi->ports) { > > + if (intel_wait_for_register(dev_priv, > > + MIPI_CTRL(port), > > + GLK_MIPIIO_PORT_POWERED, 0, > 20)) > > + DRM_ERROR("MIPI IO Port is not powergated\n"); > > + } > > +} > > + > > +static void glk_dsi_disable_mipi_io(struct intel_encoder *encoder) { > > + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); > > + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); > > + enum port port; > > + u32 tmp; > > + > > + /* Put the IO into reset */ > > + tmp = I915_READ(MIPI_CTRL(PORT_A)); > > + tmp &= ~GLK_MIPIIO_RESET_RELEASED; > > + I915_WRITE(MIPI_CTRL(PORT_A), tmp); > > + > > + /* Wait for MIPI PHY status bit to unset */ > > + for_each_dsi_port(port, intel_dsi->ports) { > > + if (intel_wait_for_register(dev_priv, > > + MIPI_CTRL(port), > > + GLK_PHY_STATUS_PORT_READY, 0, > 20)) > > + DRM_ERROR("PHY is not turning OFF\n"); > > + } > > + > > + /* Clear MIPI mode */ > > + for_each_dsi_port(port, intel_dsi->ports) { > > + tmp = I915_READ(MIPI_CTRL(port)); > > + tmp &= ~GLK_MIPIIO_ENABLE; > > + I915_WRITE(MIPI_CTRL(port), tmp); > > + } > > +} > > + > > +static void glk_dsi_clear_device_ready(struct intel_encoder *encoder) > > +{ > > + glk_dsi_enter_low_power_mode(encoder); > > + glk_dsi_disable_mipi_io(encoder); > > +} > > + > > +static void vlv_dsi_clear_device_ready(struct intel_encoder *encoder) > > { > > struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); > > struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); @@ > > -713,6 +886,17 @@ static void intel_dsi_clear_device_ready(struct > intel_encoder *encoder) > > } > > } > > > > +static void intel_dsi_clear_device_ready(struct intel_encoder > > +*encoder) { > > + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); > > + > > + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv) || > > + IS_BROXTON(dev_priv)) > > + vlv_dsi_clear_device_ready(encoder); > > + else if (IS_GEMINILAKE(dev_priv)) > > + glk_dsi_clear_device_ready(encoder); > > +} > > + > > static void intel_dsi_post_disable(struct intel_encoder *encoder, > > struct intel_crtc_state *pipe_config, > > struct drm_connector_state *conn_state) > > -- > Jani Nikula, Intel Open Source Technology Center
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index 03d0999..a72a10f 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -357,6 +357,109 @@ static bool intel_dsi_compute_config(struct intel_encoder *encoder, return true; } +static void glk_dsi_device_ready(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + enum port port; + u32 tmp, val; + + /* Set the MIPI mode + * If MIPI_Mode is off, then writing to LP_Wake bit is not reflecting. + * Power ON MIPI IO first and then write into IO reset and LP wake bits + */ + for_each_dsi_port(port, intel_dsi->ports) { + tmp = I915_READ(MIPI_CTRL(port)); + I915_WRITE(MIPI_CTRL(port), tmp | GLK_MIPIIO_ENABLE); + } + + /* Put the IO into reset */ + tmp = I915_READ(MIPI_CTRL(PORT_A)); + tmp &= ~GLK_MIPIIO_RESET_RELEASED; + I915_WRITE(MIPI_CTRL(PORT_A), tmp); + + /* Program LP Wake */ + for_each_dsi_port(port, intel_dsi->ports) { + tmp = I915_READ(MIPI_CTRL(port)); + tmp |= GLK_LP_WAKE; + I915_WRITE(MIPI_CTRL(port), tmp); + } + + /* Wait for Pwr ACK */ + for_each_dsi_port(port, intel_dsi->ports) { + if (intel_wait_for_register(dev_priv, + MIPI_CTRL(port), GLK_MIPIIO_PORT_POWERED, + GLK_MIPIIO_PORT_POWERED, 20)) + DRM_ERROR("Power ACK not received\n"); + } + + /* Wait for MIPI PHY status bit to set */ + for_each_dsi_port(port, intel_dsi->ports) { + if (intel_wait_for_register(dev_priv, + MIPI_CTRL(port), GLK_MIPIIO_PORT_POWERED, + GLK_MIPIIO_PORT_POWERED, 20)) + DRM_ERROR("PHY is not ON\n"); + } + + /* Get IO out of reset */ + tmp = I915_READ(MIPI_CTRL(PORT_A)); + I915_WRITE(MIPI_CTRL(PORT_A), tmp | GLK_MIPIIO_RESET_RELEASED); + + /* Get IO out of Low power state*/ + for_each_dsi_port(port, intel_dsi->ports) { + if (!(I915_READ(MIPI_DEVICE_READY(port)) & DEVICE_READY)) { + val = I915_READ(MIPI_DEVICE_READY(port)); + val &= ~ULPS_STATE_MASK; + val |= DEVICE_READY; + I915_WRITE(MIPI_DEVICE_READY(port), val); + usleep_range(10, 15); + } + + /* Enter ULPS */ + val = I915_READ(MIPI_DEVICE_READY(port)); + val &= ~ULPS_STATE_MASK; + val |= (ULPS_STATE_ENTER | DEVICE_READY); + I915_WRITE(MIPI_DEVICE_READY(port), val); + + /* Wait for ULPS Not active */ + if (intel_wait_for_register(dev_priv, + MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE, + GLK_ULPS_NOT_ACTIVE, 20)) + + /* Exit ULPS */ + val = I915_READ(MIPI_DEVICE_READY(port)); + val &= ~ULPS_STATE_MASK; + val |= (ULPS_STATE_EXIT | DEVICE_READY); + I915_WRITE(MIPI_DEVICE_READY(port), val); + + /* Enter Normal Mode */ + val = I915_READ(MIPI_DEVICE_READY(port)); + val &= ~ULPS_STATE_MASK; + val |= (ULPS_STATE_NORMAL_OPERATION | DEVICE_READY); + I915_WRITE(MIPI_DEVICE_READY(port), val); + + tmp = I915_READ(MIPI_CTRL(port)); + tmp &= ~GLK_LP_WAKE; + I915_WRITE(MIPI_CTRL(port), tmp); + } + + /* Wait for Stop state */ + for_each_dsi_port(port, intel_dsi->ports) { + if (intel_wait_for_register(dev_priv, + MIPI_CTRL(port), GLK_DATA_LANE_STOP_STATE, + GLK_DATA_LANE_STOP_STATE, 20)) + DRM_ERROR("Date lane not in STOP state\n"); + } + + /* Wait for AFE LATCH */ + for_each_dsi_port(port, intel_dsi->ports) { + if (intel_wait_for_register(dev_priv, + BXT_MIPI_PORT_CTRL(port), AFE_LATCHOUT, + AFE_LATCHOUT, 20)) + DRM_ERROR("D-PHY not entering LP-11 state\n"); + } +} + static void bxt_dsi_device_ready(struct intel_encoder *encoder) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); @@ -442,8 +545,10 @@ static void intel_dsi_device_ready(struct intel_encoder *encoder) if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) vlv_dsi_device_ready(encoder); - else if (IS_GEN9_LP(dev_priv)) + else if (IS_BROXTON(dev_priv)) bxt_dsi_device_ready(encoder); + else if (IS_GEMINILAKE(dev_priv)) + glk_dsi_device_ready(encoder); } static void intel_dsi_port_enable(struct intel_encoder *encoder) @@ -649,18 +754,20 @@ static void intel_dsi_disable(struct intel_encoder *encoder) msleep(2); } - for_each_dsi_port(port, intel_dsi->ports) { - /* Panel commands can be sent when clock is in LP11 */ - I915_WRITE(MIPI_DEVICE_READY(port), 0x0); + if (!IS_GEMINILAKE(dev_priv)) { + for_each_dsi_port(port, intel_dsi->ports) { + /* Panel commands can be sent when clock is in LP11 */ + I915_WRITE(MIPI_DEVICE_READY(port), 0x0); - intel_dsi_reset_clocks(encoder, port); - I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP); + intel_dsi_reset_clocks(encoder, port); + I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP); - temp = I915_READ(MIPI_DSI_FUNC_PRG(port)); - temp &= ~VID_MODE_FORMAT_MASK; - I915_WRITE(MIPI_DSI_FUNC_PRG(port), temp); + temp = I915_READ(MIPI_DSI_FUNC_PRG(port)); + temp &= ~VID_MODE_FORMAT_MASK; + I915_WRITE(MIPI_DSI_FUNC_PRG(port), temp); - I915_WRITE(MIPI_DEVICE_READY(port), 0x1); + I915_WRITE(MIPI_DEVICE_READY(port), 0x1); + } } /* if disable packets are sent before sending shutdown packet then in * some next enable sequence send turn on packet error is observed */ @@ -670,7 +777,73 @@ static void intel_dsi_disable(struct intel_encoder *encoder) wait_for_dsi_fifo_empty(intel_dsi, port); } -static void intel_dsi_clear_device_ready(struct intel_encoder *encoder) +static void glk_dsi_enter_low_power_mode(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + enum port port; + u32 val; + + /* Enter ULPS */ + for_each_dsi_port(port, intel_dsi->ports) { + val = I915_READ(MIPI_DEVICE_READY(port)); + val &= ~ULPS_STATE_MASK; + val |= (ULPS_STATE_ENTER | DEVICE_READY); + I915_WRITE(MIPI_DEVICE_READY(port), val); + } + + /* Wait for MIPI PHY status bit to unset */ + for_each_dsi_port(port, intel_dsi->ports) { + if (intel_wait_for_register(dev_priv, + MIPI_CTRL(port), + GLK_PHY_STATUS_PORT_READY, 0, 20)) + DRM_ERROR("PHY is not turning OFF\n"); + } + + /* Wait for Pwr ACK bit to unset */ + for_each_dsi_port(port, intel_dsi->ports) { + if (intel_wait_for_register(dev_priv, + MIPI_CTRL(port), + GLK_MIPIIO_PORT_POWERED, 0, 20)) + DRM_ERROR("MIPI IO Port is not powergated\n"); + } +} + +static void glk_dsi_disable_mipi_io(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + enum port port; + u32 tmp; + + /* Put the IO into reset */ + tmp = I915_READ(MIPI_CTRL(PORT_A)); + tmp &= ~GLK_MIPIIO_RESET_RELEASED; + I915_WRITE(MIPI_CTRL(PORT_A), tmp); + + /* Wait for MIPI PHY status bit to unset */ + for_each_dsi_port(port, intel_dsi->ports) { + if (intel_wait_for_register(dev_priv, + MIPI_CTRL(port), + GLK_PHY_STATUS_PORT_READY, 0, 20)) + DRM_ERROR("PHY is not turning OFF\n"); + } + + /* Clear MIPI mode */ + for_each_dsi_port(port, intel_dsi->ports) { + tmp = I915_READ(MIPI_CTRL(port)); + tmp &= ~GLK_MIPIIO_ENABLE; + I915_WRITE(MIPI_CTRL(port), tmp); + } +} + +static void glk_dsi_clear_device_ready(struct intel_encoder *encoder) +{ + glk_dsi_enter_low_power_mode(encoder); + glk_dsi_disable_mipi_io(encoder); +} + +static void vlv_dsi_clear_device_ready(struct intel_encoder *encoder) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); @@ -713,6 +886,17 @@ static void intel_dsi_clear_device_ready(struct intel_encoder *encoder) } } +static void intel_dsi_clear_device_ready(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv) || + IS_BROXTON(dev_priv)) + vlv_dsi_clear_device_ready(encoder); + else if (IS_GEMINILAKE(dev_priv)) + glk_dsi_clear_device_ready(encoder); +} + static void intel_dsi_post_disable(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config, struct drm_connector_state *conn_state)