@@ -11888,6 +11888,7 @@ intel_pipe_config_compare(struct drm_i915_private *dev_priv,
PIPE_CONF_CHECK_I(hdmi_scrambling);
PIPE_CONF_CHECK_I(hdmi_high_tmds_clock_ratio);
PIPE_CONF_CHECK_I(has_infoframe);
+ PIPE_CONF_CHECK_I(hdmi_output);
PIPE_CONF_CHECK_I(has_audio);
@@ -771,6 +771,9 @@ struct intel_crtc_state {
/* HDMI High TMDS char rate ratio */
bool hdmi_high_tmds_clock_ratio;
+
+ /* HDMI output type */
+ enum drm_hdmi_output_type hdmi_output;
};
struct intel_crtc {
@@ -1301,7 +1301,8 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
return status;
}
-static bool hdmi_12bpc_possible(struct intel_crtc_state *crtc_state)
+static bool hdmi_12bpc_possible(struct intel_crtc_state *crtc_state,
+ enum drm_hdmi_output_type hdmi_out)
{
struct drm_i915_private *dev_priv =
to_i915(crtc_state->base.crtc->dev);
@@ -1313,6 +1314,16 @@ static bool hdmi_12bpc_possible(struct intel_crtc_state *crtc_state)
if (HAS_GMCH_DISPLAY(dev_priv))
return false;
+ if (hdmi_out == DRM_HDMI_OUTPUT_YCBCR422) {
+ /*
+ * HDMI spec says YCBCR422 is 12bpc, but its not a deep
+ * color format. So respect the spec, and not allow this
+ * to be deep color
+ */
+ DRM_DEBUG_KMS("Not allowing deep color for YCBCR422 output\n");
+ return false;
+ }
+
/*
* HDMI 12bpc affects the clocks, so it's only possible
* when not cloning with other encoder types.
@@ -1326,6 +1337,12 @@ static bool hdmi_12bpc_possible(struct intel_crtc_state *crtc_state)
if (connector_state->crtc != crtc_state->base.crtc)
continue;
+ if (hdmi_out == DRM_HDMI_OUTPUT_YCBCR420) {
+ if (!(info->hdmi.ycbcr420_dc_modes &
+ DRM_EDID_YCBCR420_DC_36))
+ return false;
+ }
+
if ((info->edid_hdmi_dc_modes & DRM_EDID_HDMI_DC_36) == 0)
return false;
}
@@ -1338,6 +1355,95 @@ static bool hdmi_12bpc_possible(struct intel_crtc_state *crtc_state)
return true;
}
+static u8
+intel_hdmi_get_src_output_support(struct drm_connector *connector)
+{
+ struct drm_i915_private *dev_priv = connector->dev->dev_private;
+ u8 supported_outputs = DRM_COLOR_FORMAT_RGB444;
+
+ if (dev_priv->info.gen < 7)
+ return supported_outputs;
+
+ /* Gen 7 and above support HDMI 1.4b outputs */
+ supported_outputs |= (DRM_COLOR_FORMAT_YCRCB444 |
+ DRM_COLOR_FORMAT_YCRCB422);
+
+ if (IS_GEMINILAKE(dev_priv))
+ supported_outputs |= DRM_COLOR_FORMAT_YCRCB420;
+
+ return supported_outputs;
+}
+
+static enum drm_hdmi_output_type
+intel_hdmi_compute_ycbcr_config(struct drm_connector_state *conn_state,
+ struct intel_crtc_state *config,
+ int *clock_12bpc, int *clock_8bpc)
+{
+ struct drm_connector *connector = conn_state->connector;
+ struct drm_display_info *info = &connector->display_info;
+ struct drm_display_mode *mode = &config->base.adjusted_mode;
+ enum drm_hdmi_output_type type = conn_state->hdmi_output;
+ u8 src_output_cap = intel_hdmi_get_src_output_support(connector);
+
+ /* If this src/sink combination can support any YCBCR output */
+ if (!drm_can_support_any_ycbcr_output(info, src_output_cap)) {
+ DRM_ERROR("No supported YCBCR output\n");
+ return DRM_HDMI_OUTPUT_INVALID;
+ }
+
+ if (type == DRM_HDMI_OUTPUT_YCBCR_HQ) {
+ type = drm_get_highest_quality_ycbcr_supported(info, mode,
+ src_output_cap);
+ if (type == DRM_HDMI_OUTPUT_INVALID) {
+ DRM_ERROR("Can't support mode %s in YCBCR format\n",
+ mode->name);
+ return DRM_HDMI_OUTPUT_INVALID;
+ }
+ } else if (type == DRM_HDMI_OUTPUT_YCBCR_LQ) {
+ type = drm_get_lowest_quality_ycbcr_supported(info, mode,
+ src_output_cap);
+ if (type == DRM_HDMI_OUTPUT_INVALID) {
+ DRM_ERROR("Can't support mode %s in YCBCR format\n",
+ mode->name);
+ return DRM_HDMI_OUTPUT_INVALID;
+ }
+ }
+
+ /* If this src/sink combination can support this YCBCR output */
+ if (!drm_can_support_this_ycbcr_output(info, mode, type,
+ src_output_cap)) {
+ DRM_ERROR("output %s can't be supported\n",
+ drm_get_hdmi_output_name(type));
+ return DRM_HDMI_OUTPUT_INVALID;
+ }
+
+ switch (type) {
+ case DRM_HDMI_OUTPUT_YCBCR420:
+
+ /* ycbcr 420 TMDS rate requirement is half the pixel clock */
+ config->hdmi_output = DRM_HDMI_OUTPUT_YCBCR420;
+ config->port_clock /= 2;
+ *clock_12bpc /= 2;
+ *clock_8bpc /= 2;
+ break;
+
+ case DRM_HDMI_OUTPUT_YCBCR422:
+ case DRM_HDMI_OUTPUT_YCBCR444:
+ break;
+
+ case DRM_HDMI_OUTPUT_INVALID:
+ default:
+ DRM_ERROR("Invalid YCBCR output\n");
+ return DRM_HDMI_OUTPUT_INVALID;
+ }
+
+ /* Encoder is capable of this output, lets commit to CRTC */
+ config->hdmi_output = type;
+ DRM_DEBUG_KMS("HDMI output type is %s\n",
+ drm_get_hdmi_output_name(type));
+ return type;
+}
+
bool intel_hdmi_compute_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config,
struct drm_connector_state *conn_state)
@@ -1345,7 +1451,9 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
- struct drm_scdc *scdc = &conn_state->connector->display_info.hdmi.scdc;
+ struct drm_connector *connector = conn_state->connector;
+ struct drm_scdc *scdc = &connector->display_info.hdmi.scdc;
+ enum drm_hdmi_output_type hdmi_out = conn_state->hdmi_output;
int clock_8bpc = pipe_config->base.adjusted_mode.crtc_clock;
int clock_12bpc = clock_8bpc * 3 / 2;
int desired_bpp;
@@ -1372,6 +1480,17 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
clock_12bpc *= 2;
}
+ /* YCBCR HDMI output */
+ if (hdmi_out > DRM_HDMI_OUTPUT_DEFAULT_RGB) {
+ hdmi_out = intel_hdmi_compute_ycbcr_config(conn_state,
+ pipe_config, &clock_12bpc,
+ &clock_8bpc);
+ if (hdmi_out == DRM_HDMI_OUTPUT_INVALID) {
+ DRM_ERROR("Can't support desired HDMI output\n");
+ return false;
+ }
+ }
+
if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv))
pipe_config->has_pch_encoder = true;
@@ -1386,7 +1505,7 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
*/
if (pipe_config->pipe_bpp > 8*3 && pipe_config->has_hdmi_sink &&
hdmi_port_clock_valid(intel_hdmi, clock_12bpc, true) == MODE_OK &&
- hdmi_12bpc_possible(pipe_config)) {
+ hdmi_12bpc_possible(pipe_config, hdmi_out)) {
DRM_DEBUG_KMS("picking bpc to 12 for HDMI output\n");
desired_bpp = 12*3;
This patch adds support for HDMI ycbcr outputs in i915 layer. HDMI output mode is a connector property, this patch checks if source and sink can support the HDMI output type selected by user. And if they both can, it commits the hdmi output type into crtc state, for further staging in driver. V2: Split the patch into two, kept helper functions in DRM layer Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ander Conselvan De Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> --- drivers/gpu/drm/i915/intel_display.c | 1 + drivers/gpu/drm/i915/intel_drv.h | 3 + drivers/gpu/drm/i915/intel_hdmi.c | 125 ++++++++++++++++++++++++++++++++++- 3 files changed, 126 insertions(+), 3 deletions(-)