@@ -28,8 +28,8 @@
#include "kmb_regs.h"
-#define KMB_MAX_WIDTH 16384 /*max width in pixels */
-#define KMB_MAX_HEIGHT 16384 /*max height in pixels */
+#define KMB_MAX_WIDTH 16384 /*max width in pixels */
+#define KMB_MAX_HEIGHT 16384 /*max height in pixels */
struct kmb_drm_private {
struct drm_device drm;
@@ -84,6 +84,11 @@ static inline void kmb_write_bits(struct kmb_drm_private *lcd,
}
#endif
+static inline void kmb_write(void *reg, u32 value)
+{
+ writel(value, reg);
+}
+
static inline void kmb_write_lcd(unsigned int reg, u32 value)
{
writel(value, (LCD_BASE_ADDR + reg));
@@ -105,7 +110,7 @@ static inline u32 kmb_read_mipi(unsigned int reg)
}
static inline void kmb_write_bits_mipi(unsigned int reg, u32 offset,
- u32 num_bits, u32 value)
+ u32 num_bits, u32 value)
{
u32 reg_val = kmb_read_mipi(reg);
u32 mask = (1 << num_bits) - 1;
@@ -117,6 +122,20 @@ static inline void kmb_write_bits_mipi(unsigned int reg, u32 offset,
kmb_write_mipi(reg, reg_val);
}
+static inline void kmb_set_bit_mipi(unsigned int reg, u32 offset)
+{
+ u32 reg_val = kmb_read_mipi(reg);
+
+ kmb_write_mipi(reg, reg_val | (1 << offset));
+}
+
+static inline void kmb_clr_bit_mipi(unsigned int reg, u32 offset)
+{
+ u32 reg_val = kmb_read_mipi(reg);
+
+ kmb_write_mipi(reg, reg_val & (~(1 << offset)));
+}
+
int kmb_setup_crtc(struct drm_device *dev);
void kmb_set_scanout(struct kmb_drm_private *lcd);
#endif /* __KMB_DRV_H__ */
@@ -523,10 +523,41 @@ static void mipi_tx_fg_cfg(struct kmb_drm_private *dev_priv, u8 frame_gen,
mipi_tx_fg_cfg_regs(dev_priv, frame_gen, &fg_t_cfg);
}
+static void mipi_tx_multichannel_fifo_cfg(u8 active_lanes, u8 vchannel_id)
+{
+ u32 fifo_size, fifo_rthreshold;
+ u32 ctrl_no = MIPI_CTRL6;
+
+ /*clear all mc fifo channel sizes and thresholds*/
+ kmb_write_mipi(MIPI_TX_HS_MC_FIFO_CTRL_EN, 0);
+ kmb_write_mipi(MIPI_TX_HS_MC_FIFO_CHAN_ALLOC0, 0);
+ kmb_write_mipi(MIPI_TX_HS_MC_FIFO_CHAN_ALLOC1, 0);
+ kmb_write_mipi(MIPI_TX_HS_MC_FIFO_RTHRESHOLD0, 0);
+ kmb_write_mipi(MIPI_TX_HS_MC_FIFO_RTHRESHOLD1, 0);
+
+ fifo_size = (active_lanes > MIPI_D_LANES_PER_DPHY) ?
+ MIPI_CTRL_4LANE_MAX_MC_FIFO_LOC :
+ MIPI_CTRL_2LANE_MAX_MC_FIFO_LOC;
+ /*MC fifo size for virtual channels 0-3 */
+ /*
+ *REG_MC_FIFO_CHAN_ALLOC0: [8:0]-channel0, [24:16]-channel1
+ *REG_MC_FIFO_CHAN_ALLOC1: [8:0]-2, [24:16]-channel3
+ */
+ SET_MC_FIFO_CHAN_ALLOC(ctrl_no, vchannel_id, fifo_size);
+
+ /*set threshold to half the fifo size, actual size=size*16*/
+ fifo_rthreshold = ((fifo_size + 1) * 8) & BIT_MASK_16;
+ SET_MC_FIFO_RTHRESHOLD(ctrl_no, vchannel_id, fifo_rthreshold);
+
+ /*enable the MC FIFO channel corresponding to the Virtual Channel */
+ kmb_set_bit_mipi(MIPI_TXm_HS_MC_FIFO_CTRL_EN(ctrl_no), vchannel_id);
+}
+
static u32 mipi_tx_init_cntrl(struct kmb_drm_private *dev_priv,
- struct mipi_ctrl_cfg *ctrl_cfg)
+ struct mipi_ctrl_cfg *ctrl_cfg)
{
u32 ret;
+ u8 active_vchannels = 0;
u8 frame_id, sect;
u32 bits_per_pclk = 0;
u32 word_count = 0;
@@ -564,18 +595,23 @@ static u32 mipi_tx_init_cntrl(struct kmb_drm_private *dev_priv,
/* set frame specific parameters */
mipi_tx_fg_cfg(dev_priv, frame_id, ctrl_cfg->active_lanes,
- bits_per_pclk,
- word_count,
- ctrl_cfg->lane_rate_mbps,
- ctrl_cfg->tx_ctrl_cfg.frames[frame_id]);
- /*function for setting frame sepecific parameters will be
- * called here
- */
- /*bits_per_pclk and word_count will be passed in to this
- * function
- */
+ bits_per_pclk,
+ word_count,
+ ctrl_cfg->lane_rate_mbps,
+ ctrl_cfg->tx_ctrl_cfg.frames[frame_id]);
+
+ active_vchannels++;
+ /*connect lcd to mipi */
+ kmb_write(MSS_CAM_BASE_ADDR + MIPI_TX_MSS_LCD_MIPI_CFG, 1);
+
+ break;
}
+
+ if (active_vchannels == 0)
+ return -EINVAL;
+ /*Multi-Channel FIFO Configuration*/
+ mipi_tx_multichannel_fifo_cfg(ctrl_cfg->active_lanes, frame_id);
return ret;
}
@@ -55,6 +55,9 @@ struct kmb_connector {
#define MIPI_TX_FRAME_GEN 4
#define MIPI_TX_FRAME_GEN_SECTIONS 4
#define MIPI_CTRL_VIRTUAL_CHANNELS 4
+#define MIPI_D_LANES_PER_DPHY 2
+#define MIPI_CTRL_2LANE_MAX_MC_FIFO_LOC 255
+#define MIPI_CTRL_4LANE_MAX_MC_FIFO_LOC 511
enum mipi_ctrl_num {
MIPI_CTRL0 = 0,
@@ -31,6 +31,7 @@
#define MIPI_BASE_ADDR (void *)(0x20900000)
/*from Data Book section 12.11.6.1 page 4972 */
#define LCD_BASE_ADDR (void *)(0x20930000)
+#define MSS_CAM_BASE_ADDR (MIPI_BASE_ADDR + 0x10000)
/***************************************************************************
* LCD controller control register defines
@@ -395,6 +396,9 @@
***********************************************i****************************/
#define MIPI0_HS_BASE_ADDR (MIPI_BASE_ADDR + 0x400)
#define MIPI_CTRL_HS_BASE_ADDR (0x400)
+
+#define MIPI_TX_HS_CTRL (0x0)
+#define MIPI_TX_HS_SYNC_CFG (0x8)
#define MIPI_TX0_HS_FG0_SECT0_PH (0x40)
#define MIPI_TXm_HS_FGn_SECTo_PH(M, N, O) (MIPI_TX0_HS_FG0_SECT0_PH + \
(0x400*M) + (0x2C*N) + (8*O))
@@ -409,10 +413,10 @@
#define MIPI_TX_HS_FG0_SECT_UNPACKED_BYTES0 (0x60)
#define MIPI_TX_HS_FG0_SECT_UNPACKED_BYTES1 (0x64)
#define MIPI_TXm_HS_FGn_SECT_UNPACKED_BYTES0(M, N) \
- (MIPI_TX_HS_FG0_SECT_UNPACKED_BYTES0 + (0x400*M) + (0x2C*N))
-#define MIPI_TXm_HS_FGn_SECTo_LINE_CFG(M, N, O) (MIPI_TX_HS_FG0_SECT0_LINE_CFG \
- + (0x400*M) + (0x2C*N) + (8*O))
+ (MIPI_TX_HS_FG0_SECT_UNPACKED_BYTES0 + (0x400*M) + (0x2C*N))
#define MIPI_TX_HS_FG0_SECT0_LINE_CFG (0x44)
+#define MIPI_TXm_HS_FGn_SECTo_LINE_CFG(M, N, O) \
+ (MIPI_TX_HS_FG0_SECT0_LINE_CFG + (0x400*M) + (0x2C*N) + (8*O))
#define MIPI_TX_HS_FG0_NUM_LINES (0x68)
#define MIPI_TXm_HS_FGn_NUM_LINES(M, N) (MIPI_TX_HS_FG0_NUM_LINES + \
@@ -451,4 +455,24 @@
#define MIPI_TXm_HS_LLP_H_FRONTPORCHn(M, N) (MIPI_TX_HS_LLP_H_FRONTPORCH0 \
+ (0x400*M) + (0x4*N))
+#define MIPI_TX_HS_MC_FIFO_CTRL_EN (0x194)
+#define MIPI_TXm_HS_MC_FIFO_CTRL_EN(M) (MIPI_TX_HS_MC_FIFO_CTRL_EN \
+ + (0x400*M))
+#define MIPI_TX_HS_MC_FIFO_CHAN_ALLOC0 (0x198)
+#define MIPI_TX_HS_MC_FIFO_CHAN_ALLOC1 (0x19c)
+#define MIPI_TXm_HS_MC_FIFO_CHAN_ALLOCn(M, N) \
+ (MIPI_TX_HS_MC_FIFO_CHAN_ALLOC0 + (0x400*M) + (0x4*N))
+#define SET_MC_FIFO_CHAN_ALLOC(ctrl, vc, sz) \
+ kmb_write_bits_mipi(MIPI_TXm_HS_MC_FIFO_CHAN_ALLOCn(ctrl, vc/2), \
+ (vc % 2)*16, 16, sz)
+#define MIPI_TX_HS_MC_FIFO_RTHRESHOLD0 (0x1a0)
+#define MIPI_TX_HS_MC_FIFO_RTHRESHOLD1 (0x1a4)
+#define MIPI_TXm_HS_MC_FIFO_RTHRESHOLDn(M, N) \
+ (MIPI_TX_HS_MC_FIFO_RTHRESHOLD0 + (0x400*M) + (0x4*N))
+#define SET_MC_FIFO_RTHRESHOLD(ctrl, vc, th) \
+ kmb_write_bits_mipi(MIPI_TXm_HS_MC_FIFO_RTHRESHOLDn(ctrl, vc/2), \
+ (vc % 2)*16, 16, th)
+
+#define MIPI_TX_MSS_LCD_MIPI_CFG (0x04)
+#define BIT_MASK_16 (0xffff)
#endif /* __KMB_REGS_H__ */