diff mbox

[v2,04/13] i2c: designware-baytrail: Pass dw_i2c_dev into helper functions

Message ID 20170123210958.18410-5-hdegoede@redhat.com (mailing list archive)
State New, archived
Headers show

Commit Message

Hans de Goede Jan. 23, 2017, 9:09 p.m. UTC 
Pass dw_i2c_dev into the helper functions, this is a preparation patch
for the punit semaphore fixes done in the other patches in this set.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
---
 drivers/i2c/busses/i2c-designware-baytrail.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
diff mbox

Patch

diff --git a/drivers/i2c/busses/i2c-designware-baytrail.c b/drivers/i2c/busses/i2c-designware-baytrail.c
index 1590ad0..a3f581c 100644
--- a/drivers/i2c/busses/i2c-designware-baytrail.c
+++ b/drivers/i2c/busses/i2c-designware-baytrail.c
@@ -28,14 +28,14 @@ 
 
 static unsigned long acquired;
 
-static int get_sem(struct device *dev, u32 *sem)
+static int get_sem(struct dw_i2c_dev *dev, u32 *sem)
 {
 	u32 data;
 	int ret;
 
 	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, PUNIT_SEMAPHORE, &data);
 	if (ret) {
-		dev_err(dev, "iosf failed to read punit semaphore\n");
+		dev_err(dev->dev, "iosf failed to read punit semaphore\n");
 		return ret;
 	}
 
@@ -44,18 +44,18 @@  static int get_sem(struct device *dev, u32 *sem)
 	return 0;
 }
 
-static void reset_semaphore(struct device *dev)
+static void reset_semaphore(struct dw_i2c_dev *dev)
 {
 	u32 data;
 
 	if (iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, PUNIT_SEMAPHORE, &data)) {
-		dev_err(dev, "iosf failed to reset punit semaphore during read\n");
+		dev_err(dev->dev, "iosf failed to reset punit semaphore during read\n");
 		return;
 	}
 
 	data &= ~PUNIT_SEMAPHORE_BIT;
 	if (iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE, PUNIT_SEMAPHORE, data))
-		dev_err(dev, "iosf failed to reset punit semaphore during write\n");
+		dev_err(dev->dev, "iosf failed to reset punit semaphore during write\n");
 }
 
 static int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
@@ -83,7 +83,7 @@  static int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
 	start = jiffies;
 	end = start + msecs_to_jiffies(SEMAPHORE_TIMEOUT);
 	do {
-		ret = get_sem(dev->dev, &sem);
+		ret = get_sem(dev, &sem);
 		if (!ret && sem) {
 			acquired = jiffies;
 			dev_dbg(dev->dev, "punit semaphore acquired after %ums\n",
@@ -95,7 +95,7 @@  static int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
 	} while (time_before(jiffies, end));
 
 	dev_err(dev->dev, "punit semaphore timed out, resetting\n");
-	reset_semaphore(dev->dev);
+	reset_semaphore(dev);
 
 	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, PUNIT_SEMAPHORE, &sem);
 	if (ret)
@@ -116,7 +116,7 @@  static void baytrail_i2c_release(struct dw_i2c_dev *dev)
 	if (!dev->acquire_lock)
 		return;
 
-	reset_semaphore(dev->dev);
+	reset_semaphore(dev);
 	dev_dbg(dev->dev, "punit semaphore held for %ums\n",
 		jiffies_to_msecs(jiffies - acquired));
 }