| Message ID | 20170222102909.18072-3-ander.conselvan.de.oliveira@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Feb 22, 2017 at 12:29:08PM +0200, Ander Conselvan de Oliveira wrote: > Geminilake can output two pixels per clock, and that affects the maximum > scaling factor for its scalers. Take that into account and avoid the > following warning: > > WARNING: CPU: 1 PID: 593 at drivers/gpu/drm/i915/intel_display.c:13223 skl_max_scale.part.129+0x78/0x80 [i915] > WARN_ON_ONCE(!crtc_clock || cdclk < crtc_clock) > Modules linked in: x86_pkg_temp_thermal i915 coretemp kvm_intel kvm i2c_algo_bit drm_kms_helper irqbypass crct10dif_pclmul prime_numbers crc32_pclmul drm ghash_clmulni_intel shpchp tpm_tis tpm_tis_core tpm nfsd authw > CPU: 1 PID: 593 Comm: kworker/u8:3 Tainted: G W 4.10.0-rc8ander+ #330 > Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0035.B33.1702150552 02/15/2017 > Workqueue: events_unbound async_run_entry_fn > Call Trace: > dump_stack+0x86/0xc3 > __warn+0xcb/0xf0 > warn_slowpath_fmt+0x5f/0x80 > skl_max_scale.part.129+0x78/0x80 [i915] > intel_check_primary_plane+0xa6/0xc0 [i915] > intel_plane_atomic_check_with_state+0xd1/0x1a0 [i915] > ? drm_printk+0xb5/0xc0 [drm] > intel_plane_atomic_check+0x3d/0x80 [i915] > drm_atomic_helper_check_planes+0x7c/0x200 [drm_kms_helper] > intel_atomic_check+0xa5b/0x11a0 [i915] > drm_atomic_check_only+0x353/0x600 [drm] > ? drm_atomic_add_affected_connectors+0x10c/0x120 [drm] > drm_atomic_commit+0x18/0x50 [drm] > restore_fbdev_mode+0x14c/0x2a0 [drm_kms_helper] > drm_fb_helper_restore_fbdev_mode_unlocked+0x34/0x80 [drm_kms_helper] > drm_fb_helper_set_par+0x2d/0x60 [drm_kms_helper] > intel_fbdev_set_par+0x1a/0x70 [i915] > fbcon_init+0x582/0x610 > visual_init+0xd6/0x130 > do_bind_con_driver+0x1da/0x3c0 > do_take_over_console+0x116/0x180 > do_fbcon_takeover+0x5c/0xb0 > fbcon_event_notify+0x772/0x8a0 > ? __blocking_notifier_call_chain+0x35/0x70 > notifier_call_chain+0x4a/0x70 > __blocking_notifier_call_chain+0x4d/0x70 > blocking_notifier_call_chain+0x16/0x20 > fb_notifier_call_chain+0x1b/0x20 > register_framebuffer+0x278/0x360 > drm_fb_helper_initial_config+0x253/0x440 [drm_kms_helper] > intel_fbdev_initial_config+0x18/0x30 [i915] > async_run_entry_fn+0x39/0x170 > process_one_work+0x212/0x670 > ? process_one_work+0x197/0x670 > worker_thread+0x4e/0x490 > kthread+0x101/0x140 > ? process_one_work+0x670/0x670 > ? kthread_create_on_node+0x60/0x60 > ret_from_fork+0x31/0x40 > > Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> > Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> > --- > drivers/gpu/drm/i915/intel_display.c | 15 +++++++++++---- > 1 file changed, 11 insertions(+), 4 deletions(-) > > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c > index 957c62d..000fb31 100644 > --- a/drivers/gpu/drm/i915/intel_display.c > +++ b/drivers/gpu/drm/i915/intel_display.c > @@ -13211,16 +13211,22 @@ intel_cleanup_plane_fb(struct drm_plane *plane, > int > skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state) > { > + struct drm_i915_private *dev_priv; > int max_scale; > - int crtc_clock, cdclk; > + int crtc_clock, max_pixclk; > > if (!intel_crtc || !crtc_state->base.enable) > return DRM_PLANE_HELPER_NO_SCALING; > > + dev_priv = to_i915(intel_crtc->base.dev); > + > crtc_clock = crtc_state->base.adjusted_mode.crtc_clock; > - cdclk = to_intel_atomic_state(crtc_state->base.state)->cdclk.logical.cdclk; > + max_pixclk = to_intel_atomic_state(crtc_state->base.state)->cdclk.logical.cdclk; > + > + if (IS_GEMINILAKE(dev_priv)) > + max_pixclk *= 2; max_dotclock perhaps? > > - if (WARN_ON_ONCE(!crtc_clock || cdclk < crtc_clock)) > + if (WARN_ON_ONCE(!crtc_clock || max_pixclk < crtc_clock)) > return DRM_PLANE_HELPER_NO_SCALING; > > /* > @@ -13229,7 +13235,8 @@ skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state > * or > * cdclk/crtc_clock > */ > - max_scale = min((1 << 16) * 3 - 1, (1 << 8) * ((cdclk << 8) / crtc_clock)); > + max_scale = min((1 << 16) * 3 - 1, > + (1 << 8) * ((max_pixclk << 8) / crtc_clock)); > > return max_scale; > } > -- > 2.9.3 > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
On Wed, 2017-02-22 at 16:39 +0200, Ville Syrjälä wrote: > On Wed, Feb 22, 2017 at 12:29:08PM +0200, Ander Conselvan de Oliveira wrote: > > Geminilake can output two pixels per clock, and that affects the maximum > > scaling factor for its scalers. Take that into account and avoid the > > following warning: > > > > WARNING: CPU: 1 PID: 593 at drivers/gpu/drm/i915/intel_display.c:13223 skl_max_scale.part.129+0x78/0x80 [i915] > > WARN_ON_ONCE(!crtc_clock || cdclk < crtc_clock) > > Modules linked in: x86_pkg_temp_thermal i915 coretemp kvm_intel kvm i2c_algo_bit drm_kms_helper irqbypass crct10dif_pclmul prime_numbers crc32_pclmul drm ghash_clmulni_intel shpchp tpm_tis tpm_tis_core tpm nfsd authw > > CPU: 1 PID: 593 Comm: kworker/u8:3 Tainted: G W 4.10.0-rc8ander+ #330 > > Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0035.B33.1702150552 02/15/2017 > > Workqueue: events_unbound async_run_entry_fn > > Call Trace: > > dump_stack+0x86/0xc3 > > __warn+0xcb/0xf0 > > warn_slowpath_fmt+0x5f/0x80 > > skl_max_scale.part.129+0x78/0x80 [i915] > > intel_check_primary_plane+0xa6/0xc0 [i915] > > intel_plane_atomic_check_with_state+0xd1/0x1a0 [i915] > > ? drm_printk+0xb5/0xc0 [drm] > > intel_plane_atomic_check+0x3d/0x80 [i915] > > drm_atomic_helper_check_planes+0x7c/0x200 [drm_kms_helper] > > intel_atomic_check+0xa5b/0x11a0 [i915] > > drm_atomic_check_only+0x353/0x600 [drm] > > ? drm_atomic_add_affected_connectors+0x10c/0x120 [drm] > > drm_atomic_commit+0x18/0x50 [drm] > > restore_fbdev_mode+0x14c/0x2a0 [drm_kms_helper] > > drm_fb_helper_restore_fbdev_mode_unlocked+0x34/0x80 [drm_kms_helper] > > drm_fb_helper_set_par+0x2d/0x60 [drm_kms_helper] > > intel_fbdev_set_par+0x1a/0x70 [i915] > > fbcon_init+0x582/0x610 > > visual_init+0xd6/0x130 > > do_bind_con_driver+0x1da/0x3c0 > > do_take_over_console+0x116/0x180 > > do_fbcon_takeover+0x5c/0xb0 > > fbcon_event_notify+0x772/0x8a0 > > ? __blocking_notifier_call_chain+0x35/0x70 > > notifier_call_chain+0x4a/0x70 > > __blocking_notifier_call_chain+0x4d/0x70 > > blocking_notifier_call_chain+0x16/0x20 > > fb_notifier_call_chain+0x1b/0x20 > > register_framebuffer+0x278/0x360 > > drm_fb_helper_initial_config+0x253/0x440 [drm_kms_helper] > > intel_fbdev_initial_config+0x18/0x30 [i915] > > async_run_entry_fn+0x39/0x170 > > process_one_work+0x212/0x670 > > ? process_one_work+0x197/0x670 > > worker_thread+0x4e/0x490 > > kthread+0x101/0x140 > > ? process_one_work+0x670/0x670 > > ? kthread_create_on_node+0x60/0x60 > > ret_from_fork+0x31/0x40 > > > > Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> > > Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> > > --- > > drivers/gpu/drm/i915/intel_display.c | 15 +++++++++++---- > > 1 file changed, 11 insertions(+), 4 deletions(-) > > > > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c > > index 957c62d..000fb31 100644 > > --- a/drivers/gpu/drm/i915/intel_display.c > > +++ b/drivers/gpu/drm/i915/intel_display.c > > @@ -13211,16 +13211,22 @@ intel_cleanup_plane_fb(struct drm_plane *plane, > > int > > skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state) > > { > > + struct drm_i915_private *dev_priv; > > int max_scale; > > - int crtc_clock, cdclk; > > + int crtc_clock, max_pixclk; > > > > if (!intel_crtc || !crtc_state->base.enable) > > return DRM_PLANE_HELPER_NO_SCALING; > > > > + dev_priv = to_i915(intel_crtc->base.dev); > > + > > crtc_clock = crtc_state->base.adjusted_mode.crtc_clock; > > - cdclk = to_intel_atomic_state(crtc_state->base.state)->cdclk.logical.cdclk; > > + max_pixclk = to_intel_atomic_state(crtc_state->base.state)->cdclk.logical.cdclk; > > + > > + if (IS_GEMINILAKE(dev_priv)) > > + max_pixclk *= 2; > > max_dotclock perhaps? Yeah, that would be more consistent, will respin. Ander > > > > - if (WARN_ON_ONCE(!crtc_clock || cdclk < crtc_clock)) > > + if (WARN_ON_ONCE(!crtc_clock || max_pixclk < crtc_clock)) > > return DRM_PLANE_HELPER_NO_SCALING; > > > > /* > > @@ -13229,7 +13235,8 @@ skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state > > * or > > * cdclk/crtc_clock > > */ > > - max_scale = min((1 << 16) * 3 - 1, (1 << 8) * ((cdclk << 8) / crtc_clock)); > > + max_scale = min((1 << 16) * 3 - 1, > > + (1 << 8) * ((max_pixclk << 8) / crtc_clock)); > > > > return max_scale; > > } > > -- > > 2.9.3 > > > > _______________________________________________ > > Intel-gfx mailing list > > Intel-gfx@lists.freedesktop.org > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx > >
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 957c62d..000fb31 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -13211,16 +13211,22 @@ intel_cleanup_plane_fb(struct drm_plane *plane, int skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state) { + struct drm_i915_private *dev_priv; int max_scale; - int crtc_clock, cdclk; + int crtc_clock, max_pixclk; if (!intel_crtc || !crtc_state->base.enable) return DRM_PLANE_HELPER_NO_SCALING; + dev_priv = to_i915(intel_crtc->base.dev); + crtc_clock = crtc_state->base.adjusted_mode.crtc_clock; - cdclk = to_intel_atomic_state(crtc_state->base.state)->cdclk.logical.cdclk; + max_pixclk = to_intel_atomic_state(crtc_state->base.state)->cdclk.logical.cdclk; + + if (IS_GEMINILAKE(dev_priv)) + max_pixclk *= 2; - if (WARN_ON_ONCE(!crtc_clock || cdclk < crtc_clock)) + if (WARN_ON_ONCE(!crtc_clock || max_pixclk < crtc_clock)) return DRM_PLANE_HELPER_NO_SCALING; /* @@ -13229,7 +13235,8 @@ skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state * or * cdclk/crtc_clock */ - max_scale = min((1 << 16) * 3 - 1, (1 << 8) * ((cdclk << 8) / crtc_clock)); + max_scale = min((1 << 16) * 3 - 1, + (1 << 8) * ((max_pixclk << 8) / crtc_clock)); return max_scale; }
Geminilake can output two pixels per clock, and that affects the maximum scaling factor for its scalers. Take that into account and avoid the following warning: WARNING: CPU: 1 PID: 593 at drivers/gpu/drm/i915/intel_display.c:13223 skl_max_scale.part.129+0x78/0x80 [i915] WARN_ON_ONCE(!crtc_clock || cdclk < crtc_clock) Modules linked in: x86_pkg_temp_thermal i915 coretemp kvm_intel kvm i2c_algo_bit drm_kms_helper irqbypass crct10dif_pclmul prime_numbers crc32_pclmul drm ghash_clmulni_intel shpchp tpm_tis tpm_tis_core tpm nfsd authw CPU: 1 PID: 593 Comm: kworker/u8:3 Tainted: G W 4.10.0-rc8ander+ #330 Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0035.B33.1702150552 02/15/2017 Workqueue: events_unbound async_run_entry_fn Call Trace: dump_stack+0x86/0xc3 __warn+0xcb/0xf0 warn_slowpath_fmt+0x5f/0x80 skl_max_scale.part.129+0x78/0x80 [i915] intel_check_primary_plane+0xa6/0xc0 [i915] intel_plane_atomic_check_with_state+0xd1/0x1a0 [i915] ? drm_printk+0xb5/0xc0 [drm] intel_plane_atomic_check+0x3d/0x80 [i915] drm_atomic_helper_check_planes+0x7c/0x200 [drm_kms_helper] intel_atomic_check+0xa5b/0x11a0 [i915] drm_atomic_check_only+0x353/0x600 [drm] ? drm_atomic_add_affected_connectors+0x10c/0x120 [drm] drm_atomic_commit+0x18/0x50 [drm] restore_fbdev_mode+0x14c/0x2a0 [drm_kms_helper] drm_fb_helper_restore_fbdev_mode_unlocked+0x34/0x80 [drm_kms_helper] drm_fb_helper_set_par+0x2d/0x60 [drm_kms_helper] intel_fbdev_set_par+0x1a/0x70 [i915] fbcon_init+0x582/0x610 visual_init+0xd6/0x130 do_bind_con_driver+0x1da/0x3c0 do_take_over_console+0x116/0x180 do_fbcon_takeover+0x5c/0xb0 fbcon_event_notify+0x772/0x8a0 ? __blocking_notifier_call_chain+0x35/0x70 notifier_call_chain+0x4a/0x70 __blocking_notifier_call_chain+0x4d/0x70 blocking_notifier_call_chain+0x16/0x20 fb_notifier_call_chain+0x1b/0x20 register_framebuffer+0x278/0x360 drm_fb_helper_initial_config+0x253/0x440 [drm_kms_helper] intel_fbdev_initial_config+0x18/0x30 [i915] async_run_entry_fn+0x39/0x170 process_one_work+0x212/0x670 ? process_one_work+0x197/0x670 worker_thread+0x4e/0x490 kthread+0x101/0x140 ? process_one_work+0x670/0x670 ? kthread_create_on_node+0x60/0x60 ret_from_fork+0x31/0x40 Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> --- drivers/gpu/drm/i915/intel_display.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)