diff mbox

[v8,2/5] drm/i915: Allow choosing how to adjust brightness if both supported

Message ID 20170517003403.152680-3-puthik@chromium.org (mailing list archive)
State New, archived
Headers show

Commit Message

Puthikorn Voravootivat May 17, 2017, 12:34 a.m. UTC
Add option to allow choosing how to adjust brightness if
panel supports both PWM pin and AUX channel.

Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org>
---
 drivers/gpu/drm/i915/i915_params.c            |  8 ++++---
 drivers/gpu/drm/i915/i915_params.h            |  2 +-
 drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 31 ++++++++++++++++++++++-----
 3 files changed, 32 insertions(+), 9 deletions(-)
diff mbox

Patch

diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c
index b6a7e363d076..13cf3f1572ab 100644
--- a/drivers/gpu/drm/i915/i915_params.c
+++ b/drivers/gpu/drm/i915/i915_params.c
@@ -63,7 +63,7 @@  struct i915_params i915 __read_mostly = {
 	.huc_firmware_path = NULL,
 	.enable_dp_mst = true,
 	.inject_load_failure = 0,
-	.enable_dpcd_backlight = false,
+	.enable_dpcd_backlight = -1,
 	.enable_gvt = false,
 };
 
@@ -246,9 +246,11 @@  MODULE_PARM_DESC(enable_dp_mst,
 module_param_named_unsafe(inject_load_failure, i915.inject_load_failure, uint, 0400);
 MODULE_PARM_DESC(inject_load_failure,
 	"Force an error after a number of failure check points (0:disabled (default), N:force failure at the Nth failure check point)");
-module_param_named(enable_dpcd_backlight, i915.enable_dpcd_backlight, bool, 0600);
+module_param_named(enable_dpcd_backlight, i915.enable_dpcd_backlight, int, 0600);
 MODULE_PARM_DESC(enable_dpcd_backlight,
-	"Enable support for DPCD backlight control (default:false)");
+	"Enable support for DPCD backlight control "
+	"(-1:disable (default), 0:Use PWM pin if both supported, "
+	"1:Use DPCD if both supported");
 
 module_param_named(enable_gvt, i915.enable_gvt, bool, 0400);
 MODULE_PARM_DESC(enable_gvt,
diff --git a/drivers/gpu/drm/i915/i915_params.h b/drivers/gpu/drm/i915/i915_params.h
index 34148cc8637c..ac02efce6e22 100644
--- a/drivers/gpu/drm/i915/i915_params.h
+++ b/drivers/gpu/drm/i915/i915_params.h
@@ -66,7 +66,7 @@ 
 	func(bool, verbose_state_checks); \
 	func(bool, nuclear_pageflip); \
 	func(bool, enable_dp_mst); \
-	func(bool, enable_dpcd_backlight); \
+	func(int, enable_dpcd_backlight); \
 	func(bool, enable_gvt)
 
 #define MEMBER(T, member) T member
diff --git a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c
index d32c06583e0b..16ba1924308d 100644
--- a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c
+++ b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c
@@ -28,6 +28,10 @@  static void set_aux_backlight_enable(struct intel_dp *intel_dp, bool enable)
 {
 	uint8_t reg_val = 0;
 
+	/* Early return when display use other mechanism to enable backlight. */
+	if (!(intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_AUX_ENABLE_CAP))
+		return;
+
 	if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER,
 			      &reg_val) < 0) {
 		DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n",
@@ -39,6 +43,9 @@  static void set_aux_backlight_enable(struct intel_dp *intel_dp, bool enable)
 	else
 		reg_val &= ~(DP_EDP_BACKLIGHT_ENABLE);
 
+	/* TODO: If the panel also support enabling backlight via BL_ENABLE pin,
+	 * the backlight will be enabled again in _intel_edp_backlight_on()
+	 */
 	if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER,
 			       reg_val) != 1) {
 		DRM_DEBUG_KMS("Failed to %s aux backlight\n",
@@ -164,21 +171,35 @@  intel_dp_aux_display_control_capable(struct intel_connector *connector)
 	/* Check the  eDP Display control capabilities registers to determine if
 	 * the panel can support backlight control over the aux channel
 	 */
-	if (intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP &&
-	    (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP) &&
-	    !((intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_PIN_ENABLE_CAP) ||
-	      (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP))) {
+	if ((intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP) &&
+	    (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP)) {
 		DRM_DEBUG_KMS("AUX Backlight Control Supported!\n");
 		return true;
 	}
 	return false;
 }
 
+static bool
+intel_dp_pwm_pin_display_control_capable(struct intel_connector *connector)
+{
+	struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base);
+
+	/* Check the  eDP Display control capabilities registers to determine if
+	 * the panel can support backlight control via BL_PWM_DIM eDP pin
+	 */
+	return (intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP) &&
+	       (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP);
+}
+
 int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector)
 {
 	struct intel_panel *panel = &intel_connector->panel;
 
-	if (!i915.enable_dpcd_backlight)
+	if (i915.enable_dpcd_backlight == -1)
+		return -ENODEV;
+
+	if (i915.enable_dpcd_backlight == 0 &&
+	    intel_dp_pwm_pin_display_control_capable(intel_connector))
 		return -ENODEV;
 
 	if (!intel_dp_aux_display_control_capable(intel_connector))