Message ID | 20170517003403.152680-4-puthik@chromium.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Tue, 2017-05-16 at 17:34 -0700, Puthikorn Voravootivat wrote: > This patch adds option to enable dynamic backlight for eDP > panel that supports this feature via DPCD register and > set minimum / maximum brightness to 0% and 100% of the > normal brightness. > > Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org> > --- > drivers/gpu/drm/i915/i915_params.c | 5 ++++ > drivers/gpu/drm/i915/i915_params.h | 3 +- > drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 40 +++++++++++++++++++++++---- > 3 files changed, 41 insertions(+), 7 deletions(-) > > diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c > index 13cf3f1572ab..6eaf660e74da 100644 > --- a/drivers/gpu/drm/i915/i915_params.c > +++ b/drivers/gpu/drm/i915/i915_params.c > @@ -65,6 +65,7 @@ struct i915_params i915 __read_mostly = { > .inject_load_failure = 0, > .enable_dpcd_backlight = -1, > .enable_gvt = false, > + .enable_dbc = false, > }; > > module_param_named(modeset, i915.modeset, int, 0400); > @@ -255,3 +256,7 @@ MODULE_PARM_DESC(enable_dpcd_backlight, > module_param_named(enable_gvt, i915.enable_gvt, bool, 0400); > MODULE_PARM_DESC(enable_gvt, > "Enable support for Intel GVT-g graphics virtualization host support(default:false)"); > + > +module_param_named(enable_dbc, i915.enable_dbc, bool, 0600); > +MODULE_PARM_DESC(enable_dbc, > + "Enable support for dynamic backlight control (default:false)"); > diff --git a/drivers/gpu/drm/i915/i915_params.h b/drivers/gpu/drm/i915/i915_params.h > index ac02efce6e22..2de3e2850b54 100644 > --- a/drivers/gpu/drm/i915/i915_params.h > +++ b/drivers/gpu/drm/i915/i915_params.h > @@ -67,7 +67,8 @@ > func(bool, nuclear_pageflip); \ > func(bool, enable_dp_mst); \ > func(int, enable_dpcd_backlight); \ > - func(bool, enable_gvt) > + func(bool, enable_gvt); \ > + func(bool, enable_dbc) > > #define MEMBER(T, member) T member > struct i915_params { > diff --git a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c > index 16ba1924308d..c0eeb8fc2013 100644 > --- a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c > +++ b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c > @@ -100,10 +100,27 @@ intel_dp_aux_set_backlight(struct intel_connector *connector, u32 level) > } > } > > +/* > + * Set minimum / maximum dynamic brightness percentage. This value is expressed > + * as the percentage of normal brightness in 5% increments. > + */ > +static void > +intel_dp_aux_set_dynamic_backlight_percent(struct intel_dp *intel_dp, > + u32 min, u32 max) > +{ > + u8 dbc[] = { DIV_ROUND_CLOSEST(min, 5), DIV_ROUND_CLOSEST(max, 5) }; > + > + if (drm_dp_dpcd_write(&intel_dp->aux, DP_EDP_DBC_MINIMUM_BRIGHTNESS_SET, > + dbc, sizeof(dbc) < 0)) { Incorrect parentheses placement and return value check. > + DRM_DEBUG_KMS("Failed to write aux DBC brightness level\n"); > + } > +} > + > static void intel_dp_aux_enable_backlight(struct intel_connector *connector) > { > struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base); > uint8_t dpcd_buf = 0; > + uint8_t new_dpcd_buf = 0; nit: unnecessary initialization. > uint8_t edp_backlight_mode = 0; > > if (drm_dp_dpcd_readb(&intel_dp->aux, > @@ -113,18 +130,15 @@ static void intel_dp_aux_enable_backlight(struct intel_connector *connector) > return; > } > > + new_dpcd_buf = dpcd_buf; > edp_backlight_mode = dpcd_buf & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK; > > switch (edp_backlight_mode) { > case DP_EDP_BACKLIGHT_CONTROL_MODE_PWM: > case DP_EDP_BACKLIGHT_CONTROL_MODE_PRESET: > case DP_EDP_BACKLIGHT_CONTROL_MODE_PRODUCT: > - dpcd_buf &= ~DP_EDP_BACKLIGHT_CONTROL_MODE_MASK; > - dpcd_buf |= DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD; > - if (drm_dp_dpcd_writeb(&intel_dp->aux, > - DP_EDP_BACKLIGHT_MODE_SET_REGISTER, dpcd_buf) < 0) { > - DRM_DEBUG_KMS("Failed to write aux backlight mode\n"); > - } > + new_dpcd_buf &= ~DP_EDP_BACKLIGHT_CONTROL_MODE_MASK; > + new_dpcd_buf |= DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD; > break; > > /* Do nothing when it is already DPCD mode */ > @@ -133,6 +147,20 @@ static void intel_dp_aux_enable_backlight(struct intel_connector *connector) > break; > } > > + if (i915.enable_dbc && > + (intel_dp->edp_dpcd[2] & DP_EDP_DYNAMIC_BACKLIGHT_CAP)) { > + new_dpcd_buf |= DP_EDP_DYNAMIC_BACKLIGHT_ENABLE; > + intel_dp_aux_set_dynamic_backlight_percent(intel_dp, 0, 100); > + DRM_DEBUG_KMS("Enable dynamic brightness.\n"); > + } > + > + if (new_dpcd_buf != dpcd_buf) { > + if (drm_dp_dpcd_writeb(&intel_dp->aux, > + DP_EDP_BACKLIGHT_MODE_SET_REGISTER, new_dpcd_buf) < 0) { > + DRM_DEBUG_KMS("Failed to write aux backlight mode\n"); > + } > + } > + > set_aux_backlight_enable(intel_dp, true); > intel_dp_aux_set_backlight(connector, connector->panel.backlight.level); > }
Hi Dhinakaran, Quick question So what is the update about adding new option in i915_params? Is this patch good to go after fixing the 2 points you mentioned? Thanks On Wed, May 17, 2017 at 1:33 PM, Pandiyan, Dhinakaran < dhinakaran.pandiyan@intel.com> wrote: > On Tue, 2017-05-16 at 17:34 -0700, Puthikorn Voravootivat wrote: > > This patch adds option to enable dynamic backlight for eDP > > panel that supports this feature via DPCD register and > > set minimum / maximum brightness to 0% and 100% of the > > normal brightness. > > > > Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org> > > --- > > drivers/gpu/drm/i915/i915_params.c | 5 ++++ > > drivers/gpu/drm/i915/i915_params.h | 3 +- > > drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 40 > +++++++++++++++++++++++---- > > 3 files changed, 41 insertions(+), 7 deletions(-) > > > > diff --git a/drivers/gpu/drm/i915/i915_params.c > b/drivers/gpu/drm/i915/i915_params.c > > index 13cf3f1572ab..6eaf660e74da 100644 > > --- a/drivers/gpu/drm/i915/i915_params.c > > +++ b/drivers/gpu/drm/i915/i915_params.c > > @@ -65,6 +65,7 @@ struct i915_params i915 __read_mostly = { > > .inject_load_failure = 0, > > .enable_dpcd_backlight = -1, > > .enable_gvt = false, > > + .enable_dbc = false, > > }; > > > > module_param_named(modeset, i915.modeset, int, 0400); > > @@ -255,3 +256,7 @@ MODULE_PARM_DESC(enable_dpcd_backlight, > > module_param_named(enable_gvt, i915.enable_gvt, bool, 0400); > > MODULE_PARM_DESC(enable_gvt, > > "Enable support for Intel GVT-g graphics virtualization host > support(default:false)"); > > + > > +module_param_named(enable_dbc, i915.enable_dbc, bool, 0600); > > +MODULE_PARM_DESC(enable_dbc, > > + "Enable support for dynamic backlight control (default:false)"); > > diff --git a/drivers/gpu/drm/i915/i915_params.h > b/drivers/gpu/drm/i915/i915_params.h > > index ac02efce6e22..2de3e2850b54 100644 > > --- a/drivers/gpu/drm/i915/i915_params.h > > +++ b/drivers/gpu/drm/i915/i915_params.h > > @@ -67,7 +67,8 @@ > > func(bool, nuclear_pageflip); \ > > func(bool, enable_dp_mst); \ > > func(int, enable_dpcd_backlight); \ > > - func(bool, enable_gvt) > > + func(bool, enable_gvt); \ > > + func(bool, enable_dbc) > > > > #define MEMBER(T, member) T member > > struct i915_params { > > diff --git a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c > b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c > > index 16ba1924308d..c0eeb8fc2013 100644 > > --- a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c > > +++ b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c > > @@ -100,10 +100,27 @@ intel_dp_aux_set_backlight(struct intel_connector > *connector, u32 level) > > } > > } > > > > +/* > > + * Set minimum / maximum dynamic brightness percentage. This value is > expressed > > + * as the percentage of normal brightness in 5% increments. > > + */ > > +static void > > +intel_dp_aux_set_dynamic_backlight_percent(struct intel_dp *intel_dp, > > + u32 min, u32 max) > > +{ > > + u8 dbc[] = { DIV_ROUND_CLOSEST(min, 5), DIV_ROUND_CLOSEST(max, 5) > }; > > + > > + if (drm_dp_dpcd_write(&intel_dp->aux, > DP_EDP_DBC_MINIMUM_BRIGHTNESS_SET, > > + dbc, sizeof(dbc) < 0)) { > > Incorrect parentheses placement and return value check. > > > + DRM_DEBUG_KMS("Failed to write aux DBC brightness > level\n"); > > + } > > +} > > + > > static void intel_dp_aux_enable_backlight(struct intel_connector > *connector) > > { > > struct intel_dp *intel_dp = enc_to_intel_dp(&connector-> > encoder->base); > > uint8_t dpcd_buf = 0; > > + uint8_t new_dpcd_buf = 0; > > nit: unnecessary initialization. > > > uint8_t edp_backlight_mode = 0; > > > > if (drm_dp_dpcd_readb(&intel_dp->aux, > > @@ -113,18 +130,15 @@ static void intel_dp_aux_enable_backlight(struct > intel_connector *connector) > > return; > > } > > > > + new_dpcd_buf = dpcd_buf; > > edp_backlight_mode = dpcd_buf & DP_EDP_BACKLIGHT_CONTROL_MODE_ > MASK; > > > > switch (edp_backlight_mode) { > > case DP_EDP_BACKLIGHT_CONTROL_MODE_PWM: > > case DP_EDP_BACKLIGHT_CONTROL_MODE_PRESET: > > case DP_EDP_BACKLIGHT_CONTROL_MODE_PRODUCT: > > - dpcd_buf &= ~DP_EDP_BACKLIGHT_CONTROL_MODE_MASK; > > - dpcd_buf |= DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD; > > - if (drm_dp_dpcd_writeb(&intel_dp->aux, > > - DP_EDP_BACKLIGHT_MODE_SET_REGISTER, dpcd_buf) < > 0) { > > - DRM_DEBUG_KMS("Failed to write aux backlight > mode\n"); > > - } > > + new_dpcd_buf &= ~DP_EDP_BACKLIGHT_CONTROL_MODE_MASK; > > + new_dpcd_buf |= DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD; > > break; > > > > /* Do nothing when it is already DPCD mode */ > > @@ -133,6 +147,20 @@ static void intel_dp_aux_enable_backlight(struct > intel_connector *connector) > > break; > > } > > > > + if (i915.enable_dbc && > > + (intel_dp->edp_dpcd[2] & DP_EDP_DYNAMIC_BACKLIGHT_CAP)) { > > + new_dpcd_buf |= DP_EDP_DYNAMIC_BACKLIGHT_ENABLE; > > + intel_dp_aux_set_dynamic_backlight_percent(intel_dp, 0, > 100); > > + DRM_DEBUG_KMS("Enable dynamic brightness.\n"); > > + } > > + > > + if (new_dpcd_buf != dpcd_buf) { > > + if (drm_dp_dpcd_writeb(&intel_dp->aux, > > + DP_EDP_BACKLIGHT_MODE_SET_REGISTER, new_dpcd_buf) > < 0) { > > + DRM_DEBUG_KMS("Failed to write aux backlight > mode\n"); > > + } > > + } > > + > > set_aux_backlight_enable(intel_dp, true); > > intel_dp_aux_set_backlight(connector, connector->panel.backlight. > level); > > } > >
Yeah, looks fine to me. -DK From: puthik@google.com [mailto:puthik@google.com] On Behalf Of Puthikorn Voravootivat Sent: Friday, May 19, 2017 2:00 PM To: Pandiyan, Dhinakaran <dhinakaran.pandiyan@intel.com> Cc: puthik@chromium.org; dri-devel@lists.freedesktop.org; intel-gfx@lists.freedesktop.org; jani.nikula@linux.intel.com Subject: Re: [Intel-gfx] [PATCH v8 3/5] drm/i915: Add option to support dynamic backlight via DPCD Hi Dhinakaran, Quick question So what is the update about adding new option in i915_params? Is this patch good to go after fixing the 2 points you mentioned? Thanks On Wed, May 17, 2017 at 1:33 PM, Pandiyan, Dhinakaran <dhinakaran.pandiyan@intel.com<mailto:dhinakaran.pandiyan@intel.com>> wrote: On Tue, 2017-05-16 at 17:34 -0700, Puthikorn Voravootivat wrote: > This patch adds option to enable dynamic backlight for eDP > panel that supports this feature via DPCD register and > set minimum / maximum brightness to 0% and 100% of the > normal brightness. > > Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org<mailto:puthik@chromium.org>> > --- > drivers/gpu/drm/i915/i915_params.c | 5 ++++ > drivers/gpu/drm/i915/i915_params.h | 3 +- > drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 40 +++++++++++++++++++++++---- > 3 files changed, 41 insertions(+), 7 deletions(-) > > diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c > index 13cf3f1572ab..6eaf660e74da 100644 > --- a/drivers/gpu/drm/i915/i915_params.c > +++ b/drivers/gpu/drm/i915/i915_params.c > @@ -65,6 +65,7 @@ struct i915_params i915 __read_mostly = { > .inject_load_failure = 0, > .enable_dpcd_backlight = -1, > .enable_gvt = false, > + .enable_dbc = false, > }; > > module_param_named(modeset, i915.modeset, int, 0400); > @@ -255,3 +256,7 @@ MODULE_PARM_DESC(enable_dpcd_backlight, > module_param_named(enable_gvt, i915.enable_gvt, bool, 0400); > MODULE_PARM_DESC(enable_gvt, > "Enable support for Intel GVT-g graphics virtualization host support(default:false)"); > + > +module_param_named(enable_dbc, i915.enable_dbc, bool, 0600); > +MODULE_PARM_DESC(enable_dbc, > + "Enable support for dynamic backlight control (default:false)"); > diff --git a/drivers/gpu/drm/i915/i915_params.h b/drivers/gpu/drm/i915/i915_params.h > index ac02efce6e22..2de3e2850b54 100644 > --- a/drivers/gpu/drm/i915/i915_params.h > +++ b/drivers/gpu/drm/i915/i915_params.h > @@ -67,7 +67,8 @@ > func(bool, nuclear_pageflip); \ > func(bool, enable_dp_mst); \ > func(int, enable_dpcd_backlight); \ > - func(bool, enable_gvt) > + func(bool, enable_gvt); \ > + func(bool, enable_dbc) > > #define MEMBER(T, member) T member > struct i915_params { > diff --git a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c > index 16ba1924308d..c0eeb8fc2013 100644 > --- a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c > +++ b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c > @@ -100,10 +100,27 @@ intel_dp_aux_set_backlight(struct intel_connector *connector, u32 level) > } > } > > +/* > + * Set minimum / maximum dynamic brightness percentage. This value is expressed > + * as the percentage of normal brightness in 5% increments. > + */ > +static void > +intel_dp_aux_set_dynamic_backlight_percent(struct intel_dp *intel_dp, > + u32 min, u32 max) > +{ > + u8 dbc[] = { DIV_ROUND_CLOSEST(min, 5), DIV_ROUND_CLOSEST(max, 5) }; > + > + if (drm_dp_dpcd_write(&intel_dp->aux, DP_EDP_DBC_MINIMUM_BRIGHTNESS_SET, > + dbc, sizeof(dbc) < 0)) { Incorrect parentheses placement and return value check. > + DRM_DEBUG_KMS("Failed to write aux DBC brightness level\n"); > + } > +} > + > static void intel_dp_aux_enable_backlight(struct intel_connector *connector) > { > struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base); > uint8_t dpcd_buf = 0; > + uint8_t new_dpcd_buf = 0; nit: unnecessary initialization. > uint8_t edp_backlight_mode = 0; > > if (drm_dp_dpcd_readb(&intel_dp->aux, > @@ -113,18 +130,15 @@ static void intel_dp_aux_enable_backlight(struct intel_connector *connector) > return; > } > > + new_dpcd_buf = dpcd_buf; > edp_backlight_mode = dpcd_buf & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK; > > switch (edp_backlight_mode) { > case DP_EDP_BACKLIGHT_CONTROL_MODE_PWM: > case DP_EDP_BACKLIGHT_CONTROL_MODE_PRESET: > case DP_EDP_BACKLIGHT_CONTROL_MODE_PRODUCT: > - dpcd_buf &= ~DP_EDP_BACKLIGHT_CONTROL_MODE_MASK; > - dpcd_buf |= DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD; > - if (drm_dp_dpcd_writeb(&intel_dp->aux, > - DP_EDP_BACKLIGHT_MODE_SET_REGISTER, dpcd_buf) < 0) { > - DRM_DEBUG_KMS("Failed to write aux backlight mode\n"); > - } > + new_dpcd_buf &= ~DP_EDP_BACKLIGHT_CONTROL_MODE_MASK; > + new_dpcd_buf |= DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD; > break; > > /* Do nothing when it is already DPCD mode */ > @@ -133,6 +147,20 @@ static void intel_dp_aux_enable_backlight(struct intel_connector *connector) > break; > } > > + if (i915.enable_dbc && > + (intel_dp->edp_dpcd[2] & DP_EDP_DYNAMIC_BACKLIGHT_CAP)) { > + new_dpcd_buf |= DP_EDP_DYNAMIC_BACKLIGHT_ENABLE; > + intel_dp_aux_set_dynamic_backlight_percent(intel_dp, 0, 100); > + DRM_DEBUG_KMS("Enable dynamic brightness.\n"); > + } > + > + if (new_dpcd_buf != dpcd_buf) { > + if (drm_dp_dpcd_writeb(&intel_dp->aux, > + DP_EDP_BACKLIGHT_MODE_SET_REGISTER, new_dpcd_buf) < 0) { > + DRM_DEBUG_KMS("Failed to write aux backlight mode\n"); > + } > + } > + > set_aux_backlight_enable(intel_dp, true); > intel_dp_aux_set_backlight(connector, connector->panel.backlight.level); > }
diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c index 13cf3f1572ab..6eaf660e74da 100644 --- a/drivers/gpu/drm/i915/i915_params.c +++ b/drivers/gpu/drm/i915/i915_params.c @@ -65,6 +65,7 @@ struct i915_params i915 __read_mostly = { .inject_load_failure = 0, .enable_dpcd_backlight = -1, .enable_gvt = false, + .enable_dbc = false, }; module_param_named(modeset, i915.modeset, int, 0400); @@ -255,3 +256,7 @@ MODULE_PARM_DESC(enable_dpcd_backlight, module_param_named(enable_gvt, i915.enable_gvt, bool, 0400); MODULE_PARM_DESC(enable_gvt, "Enable support for Intel GVT-g graphics virtualization host support(default:false)"); + +module_param_named(enable_dbc, i915.enable_dbc, bool, 0600); +MODULE_PARM_DESC(enable_dbc, + "Enable support for dynamic backlight control (default:false)"); diff --git a/drivers/gpu/drm/i915/i915_params.h b/drivers/gpu/drm/i915/i915_params.h index ac02efce6e22..2de3e2850b54 100644 --- a/drivers/gpu/drm/i915/i915_params.h +++ b/drivers/gpu/drm/i915/i915_params.h @@ -67,7 +67,8 @@ func(bool, nuclear_pageflip); \ func(bool, enable_dp_mst); \ func(int, enable_dpcd_backlight); \ - func(bool, enable_gvt) + func(bool, enable_gvt); \ + func(bool, enable_dbc) #define MEMBER(T, member) T member struct i915_params { diff --git a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c index 16ba1924308d..c0eeb8fc2013 100644 --- a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c +++ b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c @@ -100,10 +100,27 @@ intel_dp_aux_set_backlight(struct intel_connector *connector, u32 level) } } +/* + * Set minimum / maximum dynamic brightness percentage. This value is expressed + * as the percentage of normal brightness in 5% increments. + */ +static void +intel_dp_aux_set_dynamic_backlight_percent(struct intel_dp *intel_dp, + u32 min, u32 max) +{ + u8 dbc[] = { DIV_ROUND_CLOSEST(min, 5), DIV_ROUND_CLOSEST(max, 5) }; + + if (drm_dp_dpcd_write(&intel_dp->aux, DP_EDP_DBC_MINIMUM_BRIGHTNESS_SET, + dbc, sizeof(dbc) < 0)) { + DRM_DEBUG_KMS("Failed to write aux DBC brightness level\n"); + } +} + static void intel_dp_aux_enable_backlight(struct intel_connector *connector) { struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base); uint8_t dpcd_buf = 0; + uint8_t new_dpcd_buf = 0; uint8_t edp_backlight_mode = 0; if (drm_dp_dpcd_readb(&intel_dp->aux, @@ -113,18 +130,15 @@ static void intel_dp_aux_enable_backlight(struct intel_connector *connector) return; } + new_dpcd_buf = dpcd_buf; edp_backlight_mode = dpcd_buf & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK; switch (edp_backlight_mode) { case DP_EDP_BACKLIGHT_CONTROL_MODE_PWM: case DP_EDP_BACKLIGHT_CONTROL_MODE_PRESET: case DP_EDP_BACKLIGHT_CONTROL_MODE_PRODUCT: - dpcd_buf &= ~DP_EDP_BACKLIGHT_CONTROL_MODE_MASK; - dpcd_buf |= DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD; - if (drm_dp_dpcd_writeb(&intel_dp->aux, - DP_EDP_BACKLIGHT_MODE_SET_REGISTER, dpcd_buf) < 0) { - DRM_DEBUG_KMS("Failed to write aux backlight mode\n"); - } + new_dpcd_buf &= ~DP_EDP_BACKLIGHT_CONTROL_MODE_MASK; + new_dpcd_buf |= DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD; break; /* Do nothing when it is already DPCD mode */ @@ -133,6 +147,20 @@ static void intel_dp_aux_enable_backlight(struct intel_connector *connector) break; } + if (i915.enable_dbc && + (intel_dp->edp_dpcd[2] & DP_EDP_DYNAMIC_BACKLIGHT_CAP)) { + new_dpcd_buf |= DP_EDP_DYNAMIC_BACKLIGHT_ENABLE; + intel_dp_aux_set_dynamic_backlight_percent(intel_dp, 0, 100); + DRM_DEBUG_KMS("Enable dynamic brightness.\n"); + } + + if (new_dpcd_buf != dpcd_buf) { + if (drm_dp_dpcd_writeb(&intel_dp->aux, + DP_EDP_BACKLIGHT_MODE_SET_REGISTER, new_dpcd_buf) < 0) { + DRM_DEBUG_KMS("Failed to write aux backlight mode\n"); + } + } + set_aux_backlight_enable(intel_dp, true); intel_dp_aux_set_backlight(connector, connector->panel.backlight.level); }
This patch adds option to enable dynamic backlight for eDP panel that supports this feature via DPCD register and set minimum / maximum brightness to 0% and 100% of the normal brightness. Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org> --- drivers/gpu/drm/i915/i915_params.c | 5 ++++ drivers/gpu/drm/i915/i915_params.h | 3 +- drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 40 +++++++++++++++++++++++---- 3 files changed, 41 insertions(+), 7 deletions(-)