@@ -1675,37 +1675,8 @@ static void gen6_rps_irq_handler(struct drm_i915_private *dev_priv, u32 pm_iir)
static void gen9_guc_irq_handler(struct drm_i915_private *dev_priv, u32 gt_iir)
{
- if (gt_iir & GEN9_GUC_TO_HOST_INT_EVENT) {
- /* Sample the log buffer flush related bits & clear them out now
- * itself from the message identity register to minimize the
- * probability of losing a flush interrupt, when there are back
- * to back flush interrupts.
- * There can be a new flush interrupt, for different log buffer
- * type (like for ISR), whilst Host is handling one (for DPC).
- * Since same bit is used in message register for ISR & DPC, it
- * could happen that GuC sets the bit for 2nd interrupt but Host
- * clears out the bit on handling the 1st interrupt.
- */
- u32 msg, flush;
-
- msg = I915_READ(SOFT_SCRATCH(15));
- flush = msg & (INTEL_GUC_RECV_MSG_CRASH_DUMP_POSTED |
- INTEL_GUC_RECV_MSG_FLUSH_LOG_BUFFER);
- if (flush) {
- /* Clear the message bits that are handled */
- I915_WRITE(SOFT_SCRATCH(15), msg & ~flush);
-
- /* Handle flush interrupt in bottom half */
- queue_work(dev_priv->guc.log.runtime.flush_wq,
- &dev_priv->guc.log.runtime.flush_work);
-
- dev_priv->guc.log.flush_interrupt_count++;
- } else {
- /* Not clearing of unhandled event bits won't result in
- * re-triggering of the interrupt.
- */
- }
- }
+ if (gt_iir & GEN9_GUC_TO_HOST_INT_EVENT)
+ intel_guc_notification_handler(&dev_priv->guc);
}
static void valleyview_pipestat_irq_ack(struct drm_i915_private *dev_priv,
@@ -533,6 +533,43 @@ int intel_guc_send_mmio(struct intel_guc *guc, const u32 *action, u32 len,
return ret;
}
+void intel_guc_notification_handler(struct intel_guc *guc)
+{
+ struct drm_i915_private *dev_priv = guc_to_i915(guc);
+ u32 msg, flush;
+
+ /*
+ * Sample the log buffer flush related bits & clear them out now
+ * itself from the message identity register to minimize the
+ * probability of losing a flush interrupt, when there are back
+ * to back flush interrupts.
+ * There can be a new flush interrupt, for different log buffer
+ * type (like for ISR), whilst Host is handling one (for DPC).
+ * Since same bit is used in message register for ISR & DPC, it
+ * could happen that GuC sets the bit for 2nd interrupt but Host
+ * clears out the bit on handling the 1st interrupt.
+ */
+
+ msg = I915_READ(SOFT_SCRATCH(15));
+ flush = msg & (INTEL_GUC_RECV_MSG_CRASH_DUMP_POSTED |
+ INTEL_GUC_RECV_MSG_FLUSH_LOG_BUFFER);
+ if (flush) {
+ /* Clear the message bits that are handled */
+ I915_WRITE(SOFT_SCRATCH(15), msg & ~flush);
+
+ /* Handle flush interrupt in bottom half */
+ queue_work(dev_priv->guc.log.runtime.flush_wq,
+ &dev_priv->guc.log.runtime.flush_work);
+
+ dev_priv->guc.log.flush_interrupt_count++;
+ } else {
+ /*
+ * Not clearing of unhandled event bits won't result in
+ * re-triggering of the interrupt.
+ */
+ }
+}
+
int intel_guc_sample_forcewake(struct intel_guc *guc)
{
struct drm_i915_private *dev_priv = guc_to_i915(guc);
@@ -226,6 +226,7 @@ void intel_uc_init_fw(struct drm_i915_private *dev_priv);
void intel_uc_fini_fw(struct drm_i915_private *dev_priv);
int intel_uc_init_hw(struct drm_i915_private *dev_priv);
void intel_uc_fini_hw(struct drm_i915_private *dev_priv);
+void intel_guc_notification_handler(struct intel_guc *guc);
int intel_guc_sample_forcewake(struct intel_guc *guc);
int intel_guc_send_nop(struct intel_guc *guc, const u32 *action, u32 len, u32 *response);
int intel_guc_send_mmio(struct intel_guc *guc, const u32 *action, u32 len, u32 *response);
To allow future code reuse. While here, fix comment style. Suggested-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> --- drivers/gpu/drm/i915/i915_irq.c | 33 ++------------------------------- drivers/gpu/drm/i915/intel_uc.c | 37 +++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_uc.h | 1 + 3 files changed, 40 insertions(+), 31 deletions(-)