@@ -4038,13 +4038,6 @@ intel_dp_configure_mst(struct intel_dp *intel_dp)
intel_dp->is_mst);
}
-static bool
-intel_dp_get_sink_irq(struct intel_dp *intel_dp, u8 *sink_irq_vector)
-{
- return drm_dp_dpcd_readb(&intel_dp->aux, DP_DEVICE_SERVICE_IRQ_VECTOR,
- sink_irq_vector) == 1;
-}
-
static bool
intel_dp_get_sink_irq_esi(struct intel_dp *intel_dp, u8 *sink_irq_vector)
{
@@ -4432,6 +4425,26 @@ static bool intel_dp_hotplug(struct intel_encoder *encoder,
return changed;
}
+static void intel_dp_check_service_irq(struct intel_dp *intel_dp)
+{
+ u8 val;
+
+ if (intel_dp->dpcd[DP_DPCD_REV] < 0x11)
+ return;
+
+ if (drm_dp_dpcd_readb(&intel_dp->aux,
+ DP_DEVICE_SERVICE_IRQ_VECTOR, &val) != 1 || !val)
+ return;
+
+ drm_dp_dpcd_writeb(&intel_dp->aux, DP_DEVICE_SERVICE_IRQ_VECTOR, val);
+
+ if (val & DP_AUTOMATED_TEST_REQUEST)
+ intel_dp_handle_test_request(intel_dp);
+
+ if (val & (DP_CP_IRQ | DP_SINK_SPECIFIC_IRQ))
+ DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n");
+}
+
/*
* According to DP spec
* 5.1.2:
@@ -4449,7 +4462,6 @@ static bool
intel_dp_short_pulse(struct intel_dp *intel_dp)
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- u8 sink_irq_vector = 0;
u8 old_sink_count = intel_dp->sink_count;
bool ret;
@@ -4472,20 +4484,7 @@ intel_dp_short_pulse(struct intel_dp *intel_dp)
return false;
}
- /* Try to read the source of the interrupt */
- if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
- intel_dp_get_sink_irq(intel_dp, &sink_irq_vector) &&
- sink_irq_vector != 0) {
- /* Clear interrupt source */
- drm_dp_dpcd_writeb(&intel_dp->aux,
- DP_DEVICE_SERVICE_IRQ_VECTOR,
- sink_irq_vector);
-
- if (sink_irq_vector & DP_AUTOMATED_TEST_REQUEST)
- intel_dp_handle_test_request(intel_dp);
- if (sink_irq_vector & (DP_CP_IRQ | DP_SINK_SPECIFIC_IRQ))
- DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n");
- }
+ intel_dp_check_service_irq(intel_dp);
/* Handle CEC interrupts, if any */
drm_dp_cec_irq(&intel_dp->aux);
@@ -5019,7 +5018,6 @@ intel_dp_detect(struct drm_connector *connector,
struct drm_i915_private *dev_priv = to_i915(connector->dev);
struct intel_dp *intel_dp = intel_attached_dp(connector);
int status;
- u8 sink_irq_vector = 0;
struct drm_crtc *crtc;
DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
@@ -5109,20 +5107,7 @@ intel_dp_detect(struct drm_connector *connector,
to_intel_connector(connector)->detect_edid)
status = connector_status_connected;
- /* Try to read the source of the interrupt */
- if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
- intel_dp_get_sink_irq(intel_dp, &sink_irq_vector) &&
- sink_irq_vector != 0) {
- /* Clear interrupt source */
- drm_dp_dpcd_writeb(&intel_dp->aux,
- DP_DEVICE_SERVICE_IRQ_VECTOR,
- sink_irq_vector);
-
- if (sink_irq_vector & DP_AUTOMATED_TEST_REQUEST)
- intel_dp_handle_test_request(intel_dp);
- if (sink_irq_vector & (DP_CP_IRQ | DP_SINK_SPECIFIC_IRQ))
- DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n");
- }
+ intel_dp_check_service_irq(intel_dp);
out:
if (status != connector_status_connected && !intel_dp->is_mst)
There are two copies of the same code called from long and short pulse handlers. Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> --- drivers/gpu/drm/i915/intel_dp.c | 59 +++++++++++++++-------------------------- 1 file changed, 22 insertions(+), 37 deletions(-)