| Message ID | 20181015155959.28038-5-lionel.g.landwerlin@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/i915/perf: Add OA buffer size uAPI parameter | expand |
On Mon, 15 Oct 2018 at 17:00, Lionel Landwerlin <lionel.g.landwerlin@intel.com> wrote: > > The way our hardware is designed doesn't seem to let us use the > MI_RECORD_PERF_COUNT command without setting up a circular buffer. > > In the case where the user didn't request OA reports to be available > through the i915 perf stream, we can set the OA buffer to the minimum > size to avoid consuming memory which won't be used by the driver. > > v2: Simplify oa buffer size exponent selection (Chris) > Reuse vma size field (Lionel) > > v3: Restrict size opening parameter to values supported by HW (Chris) > > Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> > --- > drivers/gpu/drm/i915/i915_drv.h | 1 + > drivers/gpu/drm/i915/i915_perf.c | 92 ++++++++++++++++++++++---------- > drivers/gpu/drm/i915/i915_reg.h | 2 + > include/uapi/drm/i915_drm.h | 7 +++ > 4 files changed, 74 insertions(+), 28 deletions(-) > > diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h > index 65eaac2d7e3c..f12770bd4858 100644 > --- a/drivers/gpu/drm/i915/i915_drv.h > +++ b/drivers/gpu/drm/i915/i915_drv.h > @@ -2053,6 +2053,7 @@ struct drm_i915_private { > u32 last_ctx_id; > int format; > int format_size; > + int size_exponent; > > /** > * Locks reads and writes to all head/tail state > diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c > index 88f3f9b6a353..ff90ccebe1c1 100644 > --- a/drivers/gpu/drm/i915/i915_perf.c > +++ b/drivers/gpu/drm/i915/i915_perf.c > @@ -212,13 +212,7 @@ > #include "i915_oa_icl.h" > #include "intel_lrc_reg.h" > > -/* HW requires this to be a power of two, between 128k and 16M, though driver > - * is currently generally designed assuming the largest 16M size is used such > - * that the overflow cases are unlikely in normal operation. > - */ > -#define OA_BUFFER_SIZE SZ_16M > - > -#define OA_TAKEN(tail, head) ((tail - head) & (OA_BUFFER_SIZE - 1)) > +#define OA_TAKEN(tail, head) ((tail - head) & (dev_priv->perf.oa.oa_buffer.vma->size - 1)) > > /** > * DOC: OA Tail Pointer Race > @@ -361,6 +355,7 @@ struct perf_open_properties { > int oa_format; > bool oa_periodic; > int oa_period_exponent; > + u32 oa_buffer_size_exponent; > }; > > static void free_oa_config(struct drm_i915_private *dev_priv, > @@ -523,7 +518,7 @@ static bool oa_buffer_check_unlocked(struct drm_i915_private *dev_priv) > * could put the tail out of bounds... > */ > if (hw_tail >= gtt_offset && > - hw_tail < (gtt_offset + OA_BUFFER_SIZE)) { > + hw_tail < (gtt_offset + dev_priv->perf.oa.oa_buffer.vma->size)) { > dev_priv->perf.oa.oa_buffer.tails[!aged_idx].offset = > aging_tail = hw_tail; > dev_priv->perf.oa.oa_buffer.aging_timestamp = now; > @@ -652,7 +647,7 @@ static int gen8_append_oa_reports(struct i915_perf_stream *stream, > int report_size = dev_priv->perf.oa.oa_buffer.format_size; > u8 *oa_buf_base = dev_priv->perf.oa.oa_buffer.vaddr; > u32 gtt_offset = i915_ggtt_offset(dev_priv->perf.oa.oa_buffer.vma); > - u32 mask = (OA_BUFFER_SIZE - 1); > + u32 mask = (dev_priv->perf.oa.oa_buffer.vma->size - 1); > size_t start_offset = *offset; > unsigned long flags; > unsigned int aged_tail_idx; > @@ -692,8 +687,8 @@ static int gen8_append_oa_reports(struct i915_perf_stream *stream, > * only be incremented by multiples of the report size (notably also > * all a power of two). > */ > - if (WARN_ONCE(head > OA_BUFFER_SIZE || head % report_size || > - tail > OA_BUFFER_SIZE || tail % report_size, > + if (WARN_ONCE(head > dev_priv->perf.oa.oa_buffer.vma->size || head % report_size || > + tail > dev_priv->perf.oa.oa_buffer.vma->size || tail % report_size, > "Inconsistent OA buffer pointers: head = %u, tail = %u\n", > head, tail)) > return -EIO; > @@ -716,7 +711,7 @@ static int gen8_append_oa_reports(struct i915_perf_stream *stream, > * here would imply a driver bug that would result > * in an overrun. > */ > - if (WARN_ON((OA_BUFFER_SIZE - head) < report_size)) { > + if (WARN_ON((dev_priv->perf.oa.oa_buffer.vma->size - head) < report_size)) { > DRM_ERROR("Spurious OA head ptr: non-integral report offset\n"); > break; > } > @@ -941,7 +936,7 @@ static int gen7_append_oa_reports(struct i915_perf_stream *stream, > int report_size = dev_priv->perf.oa.oa_buffer.format_size; > u8 *oa_buf_base = dev_priv->perf.oa.oa_buffer.vaddr; > u32 gtt_offset = i915_ggtt_offset(dev_priv->perf.oa.oa_buffer.vma); > - u32 mask = (OA_BUFFER_SIZE - 1); > + u32 mask = (dev_priv->perf.oa.oa_buffer.vma->size - 1); > size_t start_offset = *offset; > unsigned long flags; > unsigned int aged_tail_idx; > @@ -978,8 +973,8 @@ static int gen7_append_oa_reports(struct i915_perf_stream *stream, > * only be incremented by multiples of the report size (notably also > * all a power of two). > */ > - if (WARN_ONCE(head > OA_BUFFER_SIZE || head % report_size || > - tail > OA_BUFFER_SIZE || tail % report_size, > + if (WARN_ONCE(head > dev_priv->perf.oa.oa_buffer.vma->size || head % report_size || > + tail > dev_priv->perf.oa.oa_buffer.vma->size || tail % report_size, > "Inconsistent OA buffer pointers: head = %u, tail = %u\n", > head, tail)) > return -EIO; > @@ -999,7 +994,7 @@ static int gen7_append_oa_reports(struct i915_perf_stream *stream, > * here would imply a driver bug that would result > * in an overrun. > */ > - if (WARN_ON((OA_BUFFER_SIZE - head) < report_size)) { > + if (WARN_ON((dev_priv->perf.oa.oa_buffer.vma->size - head) < report_size)) { > DRM_ERROR("Spurious OA head ptr: non-integral report offset\n"); > break; > } > @@ -1396,7 +1391,9 @@ static void gen7_init_oa_buffer(struct drm_i915_private *dev_priv) > > I915_WRITE(GEN7_OABUFFER, gtt_offset); > > - I915_WRITE(GEN7_OASTATUS1, gtt_offset | OABUFFER_SIZE_16M); /* tail */ > + I915_WRITE(GEN7_OASTATUS1, gtt_offset | > + ((dev_priv->perf.oa.oa_buffer.size_exponent - 17) << > + GEN7_OASTATUS1_BUFFER_SIZE_SHIFT)); /* tail */ > > /* Mark that we need updated tail pointers to read from... */ > dev_priv->perf.oa.oa_buffer.tails[0].offset = INVALID_TAIL_PTR; > @@ -1421,7 +1418,8 @@ static void gen7_init_oa_buffer(struct drm_i915_private *dev_priv) > * the assumption that new reports are being written to zeroed > * memory... > */ > - memset(dev_priv->perf.oa.oa_buffer.vaddr, 0, OA_BUFFER_SIZE); > + memset(dev_priv->perf.oa.oa_buffer.vaddr, 0, > + dev_priv->perf.oa.oa_buffer.vma->size); > > /* Maybe make ->pollin per-stream state if we support multiple > * concurrent streams in the future. > @@ -1451,7 +1449,9 @@ static void gen8_init_oa_buffer(struct drm_i915_private *dev_priv) > * bit." > */ > I915_WRITE(GEN8_OABUFFER, gtt_offset | > - OABUFFER_SIZE_16M | GEN8_OABUFFER_MEM_SELECT_GGTT); > + ((dev_priv->perf.oa.oa_buffer.size_exponent - 17) << > + GEN8_OABUFFER_BUFFER_SIZE_SHIFT) | > + GEN8_OABUFFER_MEM_SELECT_GGTT); > I915_WRITE(GEN8_OATAILPTR, gtt_offset & GEN8_OATAILPTR_MASK); > > /* Mark that we need updated tail pointers to read from... */ > @@ -1479,7 +1479,8 @@ static void gen8_init_oa_buffer(struct drm_i915_private *dev_priv) > * the assumption that new reports are being written to zeroed > * memory... > */ > - memset(dev_priv->perf.oa.oa_buffer.vaddr, 0, OA_BUFFER_SIZE); > + memset(dev_priv->perf.oa.oa_buffer.vaddr, 0, > + dev_priv->perf.oa.oa_buffer.vma->size); > > /* > * Maybe make ->pollin per-stream state if we support multiple > @@ -1488,23 +1489,24 @@ static void gen8_init_oa_buffer(struct drm_i915_private *dev_priv) > dev_priv->perf.oa.pollin = false; > } > > -static int alloc_oa_buffer(struct drm_i915_private *dev_priv) > +static int alloc_oa_buffer(struct drm_i915_private *dev_priv, int size_exponent) > { > struct drm_i915_gem_object *bo; > struct i915_vma *vma; > + size_t size = 1U << size_exponent; > int ret; > > if (WARN_ON(dev_priv->perf.oa.oa_buffer.vma)) > return -ENODEV; > > + if (WARN_ON(size < SZ_128K || size > SZ_16M)) > + return -EINVAL; > + > ret = i915_mutex_lock_interruptible(&dev_priv->drm); > if (ret) > return ret; > > - BUILD_BUG_ON_NOT_POWER_OF_2(OA_BUFFER_SIZE); > - BUILD_BUG_ON(OA_BUFFER_SIZE < SZ_128K || OA_BUFFER_SIZE > SZ_16M); > - > - bo = i915_gem_object_create(dev_priv, OA_BUFFER_SIZE); > + bo = i915_gem_object_create(dev_priv, size); > if (IS_ERR(bo)) { > DRM_ERROR("Failed to allocate OA buffer\n"); > ret = PTR_ERR(bo); > @@ -1522,6 +1524,7 @@ static int alloc_oa_buffer(struct drm_i915_private *dev_priv) > goto err_unref; > } > dev_priv->perf.oa.oa_buffer.vma = vma; > + dev_priv->perf.oa.oa_buffer.size_exponent = size_exponent; > > dev_priv->perf.oa.oa_buffer.vaddr = > i915_gem_object_pin_map(bo, I915_MAP_WB); > @@ -1530,9 +1533,10 @@ static int alloc_oa_buffer(struct drm_i915_private *dev_priv) > goto err_unpin; > } > > - DRM_DEBUG_DRIVER("OA Buffer initialized, gtt offset = 0x%x, vaddr = %p\n", > + DRM_DEBUG_DRIVER("OA Buffer initialized, gtt offset = 0x%x, vaddr = %p, size = %llu\n", > i915_ggtt_offset(dev_priv->perf.oa.oa_buffer.vma), > - dev_priv->perf.oa.oa_buffer.vaddr); > + dev_priv->perf.oa.oa_buffer.vaddr, > + dev_priv->perf.oa.oa_buffer.vma->size); > > goto unlock; > > @@ -2092,7 +2096,7 @@ static int i915_oa_stream_init(struct i915_perf_stream *stream, > intel_runtime_pm_get(dev_priv); > intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL); > > - ret = alloc_oa_buffer(dev_priv); > + ret = alloc_oa_buffer(dev_priv, props->oa_buffer_size_exponent); > if (ret) > goto err_oa_buf_alloc; > > @@ -2651,6 +2655,26 @@ static u64 oa_exponent_to_ns(struct drm_i915_private *dev_priv, int exponent) > 1000ULL * INTEL_INFO(dev_priv)->cs_timestamp_frequency_khz); > } > > +static int > +select_oa_buffer_exponent(struct drm_i915_private *i915, > + u64 requested_size) > +{ > + int order; > + > + /* > + * When no size is specified, use the largest size supported by all > + * generations. > + */ > + if (!requested_size) > + return order_base_2(SZ_16M); > + > + order = order_base_2(clamp_t(u64, requested_size, SZ_128K, SZ_16M)); > + if (requested_size != (1UL << order)) > + return -EINVAL; > + > + return order; > +} > + > /** > * read_properties_unlocked - validate + copy userspace stream open properties > * @dev_priv: i915 device instance > @@ -2778,6 +2802,12 @@ static int read_properties_unlocked(struct drm_i915_private *dev_priv, > props->oa_periodic = true; > props->oa_period_exponent = value; > break; > + case DRM_I915_PERF_PROP_OA_BUFFER_SIZE: > + ret = select_oa_buffer_exponent(dev_priv, value); > + if (ret < 0) DRM_DEBUG("OA buffer size invalid %llu\n", value); There's a now out of date comment in gen8_oa_read about not giving control over the OA buffer size to userspace :) Reviewed-by: Matthew Auld <matthew.auld@intel.com>
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 65eaac2d7e3c..f12770bd4858 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -2053,6 +2053,7 @@ struct drm_i915_private { u32 last_ctx_id; int format; int format_size; + int size_exponent; /** * Locks reads and writes to all head/tail state diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c index 88f3f9b6a353..ff90ccebe1c1 100644 --- a/drivers/gpu/drm/i915/i915_perf.c +++ b/drivers/gpu/drm/i915/i915_perf.c @@ -212,13 +212,7 @@ #include "i915_oa_icl.h" #include "intel_lrc_reg.h" -/* HW requires this to be a power of two, between 128k and 16M, though driver - * is currently generally designed assuming the largest 16M size is used such - * that the overflow cases are unlikely in normal operation. - */ -#define OA_BUFFER_SIZE SZ_16M - -#define OA_TAKEN(tail, head) ((tail - head) & (OA_BUFFER_SIZE - 1)) +#define OA_TAKEN(tail, head) ((tail - head) & (dev_priv->perf.oa.oa_buffer.vma->size - 1)) /** * DOC: OA Tail Pointer Race @@ -361,6 +355,7 @@ struct perf_open_properties { int oa_format; bool oa_periodic; int oa_period_exponent; + u32 oa_buffer_size_exponent; }; static void free_oa_config(struct drm_i915_private *dev_priv, @@ -523,7 +518,7 @@ static bool oa_buffer_check_unlocked(struct drm_i915_private *dev_priv) * could put the tail out of bounds... */ if (hw_tail >= gtt_offset && - hw_tail < (gtt_offset + OA_BUFFER_SIZE)) { + hw_tail < (gtt_offset + dev_priv->perf.oa.oa_buffer.vma->size)) { dev_priv->perf.oa.oa_buffer.tails[!aged_idx].offset = aging_tail = hw_tail; dev_priv->perf.oa.oa_buffer.aging_timestamp = now; @@ -652,7 +647,7 @@ static int gen8_append_oa_reports(struct i915_perf_stream *stream, int report_size = dev_priv->perf.oa.oa_buffer.format_size; u8 *oa_buf_base = dev_priv->perf.oa.oa_buffer.vaddr; u32 gtt_offset = i915_ggtt_offset(dev_priv->perf.oa.oa_buffer.vma); - u32 mask = (OA_BUFFER_SIZE - 1); + u32 mask = (dev_priv->perf.oa.oa_buffer.vma->size - 1); size_t start_offset = *offset; unsigned long flags; unsigned int aged_tail_idx; @@ -692,8 +687,8 @@ static int gen8_append_oa_reports(struct i915_perf_stream *stream, * only be incremented by multiples of the report size (notably also * all a power of two). */ - if (WARN_ONCE(head > OA_BUFFER_SIZE || head % report_size || - tail > OA_BUFFER_SIZE || tail % report_size, + if (WARN_ONCE(head > dev_priv->perf.oa.oa_buffer.vma->size || head % report_size || + tail > dev_priv->perf.oa.oa_buffer.vma->size || tail % report_size, "Inconsistent OA buffer pointers: head = %u, tail = %u\n", head, tail)) return -EIO; @@ -716,7 +711,7 @@ static int gen8_append_oa_reports(struct i915_perf_stream *stream, * here would imply a driver bug that would result * in an overrun. */ - if (WARN_ON((OA_BUFFER_SIZE - head) < report_size)) { + if (WARN_ON((dev_priv->perf.oa.oa_buffer.vma->size - head) < report_size)) { DRM_ERROR("Spurious OA head ptr: non-integral report offset\n"); break; } @@ -941,7 +936,7 @@ static int gen7_append_oa_reports(struct i915_perf_stream *stream, int report_size = dev_priv->perf.oa.oa_buffer.format_size; u8 *oa_buf_base = dev_priv->perf.oa.oa_buffer.vaddr; u32 gtt_offset = i915_ggtt_offset(dev_priv->perf.oa.oa_buffer.vma); - u32 mask = (OA_BUFFER_SIZE - 1); + u32 mask = (dev_priv->perf.oa.oa_buffer.vma->size - 1); size_t start_offset = *offset; unsigned long flags; unsigned int aged_tail_idx; @@ -978,8 +973,8 @@ static int gen7_append_oa_reports(struct i915_perf_stream *stream, * only be incremented by multiples of the report size (notably also * all a power of two). */ - if (WARN_ONCE(head > OA_BUFFER_SIZE || head % report_size || - tail > OA_BUFFER_SIZE || tail % report_size, + if (WARN_ONCE(head > dev_priv->perf.oa.oa_buffer.vma->size || head % report_size || + tail > dev_priv->perf.oa.oa_buffer.vma->size || tail % report_size, "Inconsistent OA buffer pointers: head = %u, tail = %u\n", head, tail)) return -EIO; @@ -999,7 +994,7 @@ static int gen7_append_oa_reports(struct i915_perf_stream *stream, * here would imply a driver bug that would result * in an overrun. */ - if (WARN_ON((OA_BUFFER_SIZE - head) < report_size)) { + if (WARN_ON((dev_priv->perf.oa.oa_buffer.vma->size - head) < report_size)) { DRM_ERROR("Spurious OA head ptr: non-integral report offset\n"); break; } @@ -1396,7 +1391,9 @@ static void gen7_init_oa_buffer(struct drm_i915_private *dev_priv) I915_WRITE(GEN7_OABUFFER, gtt_offset); - I915_WRITE(GEN7_OASTATUS1, gtt_offset | OABUFFER_SIZE_16M); /* tail */ + I915_WRITE(GEN7_OASTATUS1, gtt_offset | + ((dev_priv->perf.oa.oa_buffer.size_exponent - 17) << + GEN7_OASTATUS1_BUFFER_SIZE_SHIFT)); /* tail */ /* Mark that we need updated tail pointers to read from... */ dev_priv->perf.oa.oa_buffer.tails[0].offset = INVALID_TAIL_PTR; @@ -1421,7 +1418,8 @@ static void gen7_init_oa_buffer(struct drm_i915_private *dev_priv) * the assumption that new reports are being written to zeroed * memory... */ - memset(dev_priv->perf.oa.oa_buffer.vaddr, 0, OA_BUFFER_SIZE); + memset(dev_priv->perf.oa.oa_buffer.vaddr, 0, + dev_priv->perf.oa.oa_buffer.vma->size); /* Maybe make ->pollin per-stream state if we support multiple * concurrent streams in the future. @@ -1451,7 +1449,9 @@ static void gen8_init_oa_buffer(struct drm_i915_private *dev_priv) * bit." */ I915_WRITE(GEN8_OABUFFER, gtt_offset | - OABUFFER_SIZE_16M | GEN8_OABUFFER_MEM_SELECT_GGTT); + ((dev_priv->perf.oa.oa_buffer.size_exponent - 17) << + GEN8_OABUFFER_BUFFER_SIZE_SHIFT) | + GEN8_OABUFFER_MEM_SELECT_GGTT); I915_WRITE(GEN8_OATAILPTR, gtt_offset & GEN8_OATAILPTR_MASK); /* Mark that we need updated tail pointers to read from... */ @@ -1479,7 +1479,8 @@ static void gen8_init_oa_buffer(struct drm_i915_private *dev_priv) * the assumption that new reports are being written to zeroed * memory... */ - memset(dev_priv->perf.oa.oa_buffer.vaddr, 0, OA_BUFFER_SIZE); + memset(dev_priv->perf.oa.oa_buffer.vaddr, 0, + dev_priv->perf.oa.oa_buffer.vma->size); /* * Maybe make ->pollin per-stream state if we support multiple @@ -1488,23 +1489,24 @@ static void gen8_init_oa_buffer(struct drm_i915_private *dev_priv) dev_priv->perf.oa.pollin = false; } -static int alloc_oa_buffer(struct drm_i915_private *dev_priv) +static int alloc_oa_buffer(struct drm_i915_private *dev_priv, int size_exponent) { struct drm_i915_gem_object *bo; struct i915_vma *vma; + size_t size = 1U << size_exponent; int ret; if (WARN_ON(dev_priv->perf.oa.oa_buffer.vma)) return -ENODEV; + if (WARN_ON(size < SZ_128K || size > SZ_16M)) + return -EINVAL; + ret = i915_mutex_lock_interruptible(&dev_priv->drm); if (ret) return ret; - BUILD_BUG_ON_NOT_POWER_OF_2(OA_BUFFER_SIZE); - BUILD_BUG_ON(OA_BUFFER_SIZE < SZ_128K || OA_BUFFER_SIZE > SZ_16M); - - bo = i915_gem_object_create(dev_priv, OA_BUFFER_SIZE); + bo = i915_gem_object_create(dev_priv, size); if (IS_ERR(bo)) { DRM_ERROR("Failed to allocate OA buffer\n"); ret = PTR_ERR(bo); @@ -1522,6 +1524,7 @@ static int alloc_oa_buffer(struct drm_i915_private *dev_priv) goto err_unref; } dev_priv->perf.oa.oa_buffer.vma = vma; + dev_priv->perf.oa.oa_buffer.size_exponent = size_exponent; dev_priv->perf.oa.oa_buffer.vaddr = i915_gem_object_pin_map(bo, I915_MAP_WB); @@ -1530,9 +1533,10 @@ static int alloc_oa_buffer(struct drm_i915_private *dev_priv) goto err_unpin; } - DRM_DEBUG_DRIVER("OA Buffer initialized, gtt offset = 0x%x, vaddr = %p\n", + DRM_DEBUG_DRIVER("OA Buffer initialized, gtt offset = 0x%x, vaddr = %p, size = %llu\n", i915_ggtt_offset(dev_priv->perf.oa.oa_buffer.vma), - dev_priv->perf.oa.oa_buffer.vaddr); + dev_priv->perf.oa.oa_buffer.vaddr, + dev_priv->perf.oa.oa_buffer.vma->size); goto unlock; @@ -2092,7 +2096,7 @@ static int i915_oa_stream_init(struct i915_perf_stream *stream, intel_runtime_pm_get(dev_priv); intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL); - ret = alloc_oa_buffer(dev_priv); + ret = alloc_oa_buffer(dev_priv, props->oa_buffer_size_exponent); if (ret) goto err_oa_buf_alloc; @@ -2651,6 +2655,26 @@ static u64 oa_exponent_to_ns(struct drm_i915_private *dev_priv, int exponent) 1000ULL * INTEL_INFO(dev_priv)->cs_timestamp_frequency_khz); } +static int +select_oa_buffer_exponent(struct drm_i915_private *i915, + u64 requested_size) +{ + int order; + + /* + * When no size is specified, use the largest size supported by all + * generations. + */ + if (!requested_size) + return order_base_2(SZ_16M); + + order = order_base_2(clamp_t(u64, requested_size, SZ_128K, SZ_16M)); + if (requested_size != (1UL << order)) + return -EINVAL; + + return order; +} + /** * read_properties_unlocked - validate + copy userspace stream open properties * @dev_priv: i915 device instance @@ -2778,6 +2802,12 @@ static int read_properties_unlocked(struct drm_i915_private *dev_priv, props->oa_periodic = true; props->oa_period_exponent = value; break; + case DRM_I915_PERF_PROP_OA_BUFFER_SIZE: + ret = select_oa_buffer_exponent(dev_priv, value); + if (ret < 0) + return ret; + props->oa_buffer_size_exponent = ret; + break; case DRM_I915_PERF_PROP_MAX: MISSING_CASE(id); return -EINVAL; @@ -2786,6 +2816,12 @@ static int read_properties_unlocked(struct drm_i915_private *dev_priv, uprop += 2; } + /* If no buffer size was requested, select the default one. */ + if (!props->oa_buffer_size_exponent) { + props->oa_buffer_size_exponent = + select_oa_buffer_exponent(dev_priv, 0); + } + return 0; } diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 3bbf21ea5c57..e9fc5e4f6d87 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -595,12 +595,14 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg) #define GEN8_OABUFFER_UDW _MMIO(0x23b4) #define GEN8_OABUFFER _MMIO(0x2b14) #define GEN8_OABUFFER_MEM_SELECT_GGTT (1 << 0) /* 0: PPGTT, 1: GGTT */ +#define GEN8_OABUFFER_BUFFER_SIZE_SHIFT 3 #define GEN7_OASTATUS1 _MMIO(0x2364) #define GEN7_OASTATUS1_TAIL_MASK 0xffffffc0 #define GEN7_OASTATUS1_COUNTER_OVERFLOW (1 << 2) #define GEN7_OASTATUS1_OABUFFER_OVERFLOW (1 << 1) #define GEN7_OASTATUS1_REPORT_LOST (1 << 0) +#define GEN7_OASTATUS1_BUFFER_SIZE_SHIFT 3 #define GEN7_OASTATUS2 _MMIO(0x2368) #define GEN7_OASTATUS2_HEAD_MASK 0xffffffc0 diff --git a/include/uapi/drm/i915_drm.h b/include/uapi/drm/i915_drm.h index f22c4ee82871..e9e66665ff15 100644 --- a/include/uapi/drm/i915_drm.h +++ b/include/uapi/drm/i915_drm.h @@ -1558,6 +1558,13 @@ enum drm_i915_perf_property_id { */ DRM_I915_PERF_PROP_OA_EXPONENT, + /** + * Specify a global OA buffer size to be allocated in bytes. The size + * specified must be supported by HW (currently supported sizes are + * powers of 2 ranging from 128Kb to 16Mb). + */ + DRM_I915_PERF_PROP_OA_BUFFER_SIZE, + DRM_I915_PERF_PROP_MAX /* non-ABI */ };
The way our hardware is designed doesn't seem to let us use the MI_RECORD_PERF_COUNT command without setting up a circular buffer. In the case where the user didn't request OA reports to be available through the i915 perf stream, we can set the OA buffer to the minimum size to avoid consuming memory which won't be used by the driver. v2: Simplify oa buffer size exponent selection (Chris) Reuse vma size field (Lionel) v3: Restrict size opening parameter to values supported by HW (Chris) Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> --- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_perf.c | 92 ++++++++++++++++++++++---------- drivers/gpu/drm/i915/i915_reg.h | 2 + include/uapi/drm/i915_drm.h | 7 +++ 4 files changed, 74 insertions(+), 28 deletions(-)