@@ -433,7 +433,7 @@ GuC
Firmware Layout
-------------------
-.. kernel-doc:: drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h
+.. kernel-doc:: drivers/gpu/drm/i915/gt/uc/intel_uc_fw_abi.h
:doc: Firmware Layout
GuC-specific firmware loader
@@ -121,73 +121,6 @@
#define GUC_CTL_MAX_DWORDS (SOFT_SCRATCH_COUNT - 2) /* [1..14] */
-/**
- * DOC: Firmware Layout
- *
- * The GuC/HuC firmware layout looks like this::
- *
- * +======================================================================+
- * | Firmware blob |
- * +===============+===============+============+============+============+
- * | CSS header | uCode | RSA key | modulus | exponent |
- * +===============+===============+============+============+============+
- * <-header size-> <---header size continued ----------->
- * <--- size ----------------------------------------------------------->
- * <-key size->
- * <-mod size->
- * <-exp size->
- *
- * The firmware may or may not have modulus key and exponent data. The header,
- * uCode and RSA signature are must-have components that will be used by driver.
- * Length of each components, which is all in dwords, can be found in header.
- * In the case that modulus and exponent are not present in fw, a.k.a truncated
- * image, the length value still appears in header.
- *
- * Driver will do some basic fw size validation based on the following rules:
- *
- * 1. Header, uCode and RSA are must-have components.
- * 2. All firmware components, if they present, are in the sequence illustrated
- * in the layout table above.
- * 3. Length info of each component can be found in header, in dwords.
- * 4. Modulus and exponent key are not required by driver. They may not appear
- * in fw. So driver will load a truncated firmware in this case.
- *
- * The only difference between GuC and HuC firmwares is how the version
- * information is saved.
- */
-
-struct uc_css_header {
- u32 module_type;
- /* header_size includes all non-uCode bits, including css_header, rsa
- * key, modulus key and exponent data. */
- u32 header_size_dw;
- u32 header_version;
- u32 module_id;
- u32 module_vendor;
- u32 date;
-#define CSS_DATE_DAY (0xFF << 0)
-#define CSS_DATE_MONTH (0xFF << 8)
-#define CSS_DATE_YEAR (0xFFFF << 16)
- u32 size_dw; /* uCode plus header_size_dw */
- u32 key_size_dw;
- u32 modulus_size_dw;
- u32 exponent_size_dw;
- u32 time;
-#define CSS_TIME_HOUR (0xFF << 0)
-#define CSS_DATE_MIN (0xFF << 8)
-#define CSS_DATE_SEC (0xFFFF << 16)
- char username[8];
- char buildnumber[12];
- u32 sw_version;
-#define CSS_SW_VERSION_GUC_MAJOR (0xFF << 16)
-#define CSS_SW_VERSION_GUC_MINOR (0xFF << 8)
-#define CSS_SW_VERSION_GUC_PATCH (0xFF << 0)
-#define CSS_SW_VERSION_HUC_MAJOR (0xFFFF << 16)
-#define CSS_SW_VERSION_HUC_MINOR (0xFFFF << 0)
- u32 reserved[14];
- u32 header_info;
-} __packed;
-
/* Work item for submitting workloads into work queue of GuC. */
struct guc_wq_item {
u32 header;
@@ -27,6 +27,7 @@
#include <drm/drm_print.h>
#include "intel_uc_fw.h"
+#include "intel_uc_fw_abi.h"
#include "i915_drv.h"
/*
new file mode 100644
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2019 Intel Corporation
+ */
+
+#ifndef _INTEL_UC_FW_ABI_H
+#define _INTEL_UC_FW_ABI_H
+
+#include <linux/types.h>
+
+/**
+ * DOC: Firmware Layout
+ *
+ * The GuC/HuC firmware layout looks like this::
+ *
+ * +======================================================================+
+ * | Firmware blob |
+ * +===============+===============+============+============+============+
+ * | CSS header | uCode | RSA key | modulus | exponent |
+ * +===============+===============+============+============+============+
+ * <-header size-> <---header size continued ----------->
+ * <--- size ----------------------------------------------------------->
+ * <-key size->
+ * <-mod size->
+ * <-exp size->
+ *
+ * The firmware may or may not have modulus key and exponent data. The header,
+ * uCode and RSA signature are must-have components that will be used by driver.
+ * Length of each components, which is all in dwords, can be found in header.
+ * In the case that modulus and exponent are not present in fw, a.k.a truncated
+ * image, the length value still appears in header.
+ *
+ * Driver will do some basic fw size validation based on the following rules:
+ *
+ * 1. Header, uCode and RSA are must-have components.
+ * 2. All firmware components, if they present, are in the sequence illustrated
+ * in the layout table above.
+ * 3. Length info of each component can be found in header, in dwords.
+ * 4. Modulus and exponent key are not required by driver. They may not appear
+ * in fw. So driver will load a truncated firmware in this case.
+ *
+ * The only difference between GuC and HuC firmwares is how the version
+ * information is saved.
+ */
+
+struct uc_css_header {
+ u32 module_type;
+ /* header_size includes all non-uCode bits, including css_header, rsa
+ * key, modulus key and exponent data. */
+ u32 header_size_dw;
+ u32 header_version;
+ u32 module_id;
+ u32 module_vendor;
+ u32 date;
+#define CSS_DATE_DAY (0xFF << 0)
+#define CSS_DATE_MONTH (0xFF << 8)
+#define CSS_DATE_YEAR (0xFFFF << 16)
+ u32 size_dw; /* uCode plus header_size_dw */
+ u32 key_size_dw;
+ u32 modulus_size_dw;
+ u32 exponent_size_dw;
+ u32 time;
+#define CSS_TIME_HOUR (0xFF << 0)
+#define CSS_DATE_MIN (0xFF << 8)
+#define CSS_DATE_SEC (0xFFFF << 16)
+ char username[8];
+ char buildnumber[12];
+ u32 sw_version;
+#define CSS_SW_VERSION_GUC_MAJOR (0xFF << 16)
+#define CSS_SW_VERSION_GUC_MINOR (0xFF << 8)
+#define CSS_SW_VERSION_GUC_PATCH (0xFF << 0)
+#define CSS_SW_VERSION_HUC_MAJOR (0xFFFF << 16)
+#define CSS_SW_VERSION_HUC_MINOR (0xFFFF << 0)
+ u32 reserved[14];
+ u32 header_info;
+} __packed;
+
+#endif /* _INTEL_UC_FW_ABI_H */