diff mbox series

[v4,4/9] drm/i915/tgl: mutual exclusive handling for DC3CO and DC5/6

Message ID 20190808172158.30578-5-anshuman.gupta@intel.com (mailing list archive)
State New, archived
Headers show
Series DC3CO Support for TGL | expand

Commit Message

Gupta, Anshuman Aug. 8, 2019, 5:21 p.m. UTC 
As per B.Specs DC5 and DC6 not allowed when DC3CO is enabled
and DC3CO should be enabled only during VIDEO playback.
Which essentially means both can DC5 and DC3CO can not be
enabled at same time, it makes DC3CO and DC5 mutual exclusive.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
---
 drivers/gpu/drm/i915/display/intel_display_power.c | 8 ++++++++
 1 file changed, 8 insertions(+)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
index c570fda290c4..cd500fbdd8f3 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.c
+++ b/drivers/gpu/drm/i915/display/intel_display_power.c
@@ -996,6 +996,10 @@  static void gen9_dc_off_power_well_enable(struct drm_i915_private *dev_priv,
 
 	gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
 
+	/* DC3CO and DC5/6 are mutually exclusive */
+	if (dev_priv->csr.allowed_dc_mask & DC_STATE_EN_DC3CO)
+		tgl_allow_dc3co(dev_priv);
+
 	dev_priv->display.get_cdclk(dev_priv, &cdclk_state);
 	/* Can't read out voltage_level so can't use intel_cdclk_changed() */
 	WARN_ON(intel_cdclk_needs_modeset(&dev_priv->cdclk.hw, &cdclk_state));
@@ -1020,6 +1024,10 @@  static void gen9_dc_off_power_well_disable(struct drm_i915_private *dev_priv,
 	if (!dev_priv->csr.dmc_payload)
 		return;
 
+	/* DC3CO and DC5/6 are mutually exclusive */
+	if (dev_priv->csr.allowed_dc_mask & DC_STATE_EN_DC3CO)
+		tgl_disallow_dc3co(dev_priv);
+
 	if (dev_priv->csr.allowed_dc_mask & DC_STATE_EN_UPTO_DC6)
 		skl_enable_dc6(dev_priv);
 	else if (dev_priv->csr.allowed_dc_mask & DC_STATE_EN_UPTO_DC5)