@@ -1944,6 +1944,10 @@ intel_tile_width_bytes(const struct drm_framebuffer *fb, int color_plane)
if (color_plane == 1)
return 64;
/* fall through */
+ case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC:
+ if (color_plane == 1 || color_plane == 2)
+ return 64;
+ /* fall through */
case I915_FORMAT_MOD_Y_TILED:
if (IS_GEN(dev_priv, 2) || HAS_128_BYTE_Y_TILING(dev_priv))
return 128;
@@ -2085,6 +2089,7 @@ static unsigned int intel_surf_alignment(const struct drm_framebuffer *fb,
return 256 * 1024;
return 0;
case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS:
+ case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC:
return 16 * 1024;
case I915_FORMAT_MOD_Y_TILED_CCS:
case I915_FORMAT_MOD_Yf_TILED_CCS:
@@ -2287,6 +2292,8 @@ static bool is_surface_linear(u64 modifier, int color_plane)
return true;
case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS:
return color_plane == 1;
+ case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC:
+ return color_plane == 1 || color_plane == 2;
case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS:
return color_plane == 1 || color_plane == 3;
default:
@@ -2480,6 +2487,7 @@ static unsigned int intel_fb_modifier_to_tiling(u64 fb_modifier)
case I915_FORMAT_MOD_Y_TILED_CCS:
case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS:
case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS:
+ case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC:
return I915_TILING_Y;
default:
return I915_TILING_NONE;
@@ -2533,6 +2541,21 @@ static const struct drm_format_info gen12_ccs_formats[] = {
.cpp = { 1, 1, 2, 1}, .hsub = 2, .vsub = 2, .is_yuv = true },
};
+/*
+ * Same as gen12_ccs_formats[] above, but with additional surface used
+ * to pass Clear Color information in plane 2 with 64 bits of data.
+ */
+static const struct drm_format_info gen12_ccs_cc_formats[] = {
+ { .format = DRM_FORMAT_XRGB8888, .depth = 24, .num_planes = 3,
+ .cpp = { 4, 1, 0, }, .hsub = 2, .vsub = 32, },
+ { .format = DRM_FORMAT_XBGR8888, .depth = 24, .num_planes = 3,
+ .cpp = { 4, 1, 0, }, .hsub = 2, .vsub = 32, },
+ { .format = DRM_FORMAT_ARGB8888, .depth = 32, .num_planes = 3,
+ .cpp = { 4, 1, 0, }, .hsub = 2, .vsub = 32, .has_alpha = true },
+ { .format = DRM_FORMAT_ABGR8888, .depth = 32, .num_planes = 3,
+ .cpp = { 4, 1, 0, }, .hsub = 2, .vsub = 32, .has_alpha = true },
+};
+
static const struct drm_format_info *
lookup_format_info(const struct drm_format_info formats[],
int num_formats, u32 format)
@@ -2560,6 +2583,10 @@ intel_get_format_info(const struct drm_mode_fb_cmd2 *cmd)
return lookup_format_info(gen12_ccs_formats,
ARRAY_SIZE(gen12_ccs_formats),
cmd->pixel_format);
+ case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC:
+ return lookup_format_info(gen12_ccs_cc_formats,
+ ARRAY_SIZE(gen12_ccs_cc_formats),
+ cmd->pixel_format);
default:
return NULL;
}
@@ -2569,6 +2596,7 @@ bool is_ccs_modifier(u64 modifier)
{
return modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS ||
modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS ||
+ modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ||
modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
modifier == I915_FORMAT_MOD_Yf_TILED_CCS;
}
@@ -2756,6 +2784,8 @@ static bool is_ccs_plane(u64 modifier, int color_plane)
return false;
else if (modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS)
return color_plane == 3 || color_plane == 1;
+ else if (modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC)
+ return color_plane == 1 || color_plane == 2;
else
return color_plane == 1;
}
@@ -2824,6 +2854,18 @@ intel_fill_fb_info(struct drm_i915_private *dev_priv,
int x, y;
int ret;
+ /*
+ * Plane 2 of Render Compression with Clear Color fb modifier
+ * is consumed by the driver and not passed to DE. Skip the
+ * arithmetic related to alignment and offset calculation.
+ */
+ if (i == 2 && fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC) {
+ if (IS_ALIGNED(fb->offsets[2], PAGE_SIZE))
+ continue;
+ else
+ return -EINVAL;
+ }
+
cpp = fb->format->cpp[i];
intel_fb_plane_dims(&width, &height, fb, i);
@@ -4341,6 +4383,7 @@ static u32 skl_plane_ctl_tiling(u64 fb_modifier)
case I915_FORMAT_MOD_Y_TILED:
return PLANE_CTL_TILED_Y;
case I915_FORMAT_MOD_Y_TILED_CCS:
+ case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC:
return PLANE_CTL_TILED_Y | PLANE_CTL_RENDER_DECOMPRESSION_ENABLE;
case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS:
return PLANE_CTL_TILED_Y |
@@ -15212,6 +15255,15 @@ static int intel_plane_pin_fb(struct intel_plane_state *plane_state)
plane_state->vma = vma;
+ if (fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC) {
+ u32 *ccaddr = kmap_atomic(i915_gem_object_get_page(intel_fb_obj(fb),
+ fb->offsets[2] >> PAGE_SHIFT));
+
+ plane_state->ccval = ((u64)*(ccaddr + CC_VAL_HIGHER_OFFSET) << 32)
+ | *(ccaddr + CC_VAL_LOWER_OFFSET);
+ kunmap_atomic(ccaddr);
+ }
+
return 0;
}
@@ -587,6 +587,9 @@ struct intel_plane_state {
u32 planar_slave;
struct drm_intel_sprite_colorkey ckey;
+
+ /* Clear Color Value */
+ u64 ccval;
};
struct intel_initial_plane_config {
@@ -596,6 +596,7 @@ skl_program_plane(struct intel_plane *plane,
u32 plane_color_ctl = 0;
unsigned long irqflags;
u32 keymsk, keymax;
+ u64 ccval = plane_state->ccval;
plane_ctl |= skl_plane_ctl_crtc(crtc_state);
@@ -656,6 +657,10 @@ skl_program_plane(struct intel_plane *plane,
if (fb->format->is_yuv && icl_is_hdr_plane(dev_priv, plane_id))
icl_program_input_csc(plane, crtc_state, plane_state);
+ if (fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC)
+ intel_uncore_write64_fw(&dev_priv->uncore,
+ PLANE_CC_VAL(pipe, plane_id), ccval);
+
skl_write_plane_wm(plane, crtc_state);
I915_WRITE_FW(PLANE_KEYVAL(pipe, plane_id), key->min_value);
@@ -2115,7 +2120,8 @@ static int skl_plane_check_fb(const struct intel_crtc_state *crtc_state,
fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS ||
fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS ||
- fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS)) {
+ fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS ||
+ fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC)) {
DRM_DEBUG_KMS("Y/Yf tiling not supported in IF-ID mode\n");
return -EINVAL;
}
@@ -2554,6 +2560,7 @@ static const u64 skl_plane_format_modifiers_ccs[] = {
static const u64 gen12_plane_format_modifiers_mc_ccs[] = {
I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS,
I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS,
+ I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC,
I915_FORMAT_MOD_Y_TILED,
I915_FORMAT_MOD_X_TILED,
DRM_FORMAT_MOD_LINEAR,
@@ -2562,6 +2569,7 @@ static const u64 gen12_plane_format_modifiers_mc_ccs[] = {
static const u64 gen12_plane_format_modifiers_rc_ccs[] = {
I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS,
+ I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC,
I915_FORMAT_MOD_Y_TILED,
I915_FORMAT_MOD_X_TILED,
DRM_FORMAT_MOD_LINEAR,
@@ -2737,6 +2745,7 @@ static bool gen12_plane_format_mod_supported(struct drm_plane *_plane,
case I915_FORMAT_MOD_X_TILED:
case I915_FORMAT_MOD_Y_TILED:
case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS:
+ case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC:
break;
default:
return false;
@@ -6753,6 +6753,8 @@ enum {
#define _PLANE_KEYMAX_1_A 0x701a0
#define _PLANE_KEYMAX_2_A 0x702a0
#define PLANE_KEYMAX_ALPHA(a) ((a) << 24)
+#define _PLANE_CC_VAL_1_A 0x701b4
+#define _PLANE_CC_VAL_2_A 0x702b4
#define _PLANE_AUX_DIST_1_A 0x701c0
#define _PLANE_AUX_DIST_2_A 0x702c0
#define _PLANE_AUX_OFFSET_1_A 0x701c4
@@ -6792,6 +6794,16 @@ enum {
#define _PLANE_NV12_BUF_CFG_1_A 0x70278
#define _PLANE_NV12_BUF_CFG_2_A 0x70378
+#define _PLANE_CC_VAL_1_B 0x711b4
+#define _PLANE_CC_VAL_2_B 0x712b4
+#define _PLANE_CC_VAL_1(pipe) _PIPE(pipe, _PLANE_CC_VAL_1_A, _PLANE_CC_VAL_1_B)
+#define _PLANE_CC_VAL_2(pipe) _PIPE(pipe, _PLANE_CC_VAL_2_A, _PLANE_CC_VAL_2_B)
+#define PLANE_CC_VAL(pipe, plane) \
+ _MMIO_PLANE(plane, _PLANE_CC_VAL_1(pipe), _PLANE_CC_VAL_2(pipe))
+
+#define CC_VAL_LOWER_OFFSET 4
+#define CC_VAL_HIGHER_OFFSET 5
+
/* Input CSC Register Definitions */
#define _PLANE_INPUT_CSC_RY_GY_1_A 0x701E0
#define _PLANE_INPUT_CSC_RY_GY_2_A 0x702E0
Render Decompression is supported with Y-Tiled main surface. The CCS is linear and has 4 bits of data for each main surface cache line pair, a ratio of 1:256. Additional Clear Color information is passed from the user-space through an offset in the GEM BO. Add a new modifier to identify and parse new Clear Color information and extend Gen12 render decompression functionality to the newly added modifier. v2: Fix has_alpha flag for modifiers, omit CC modifier during initial plane config(Matt). Fix Lookup error. v3: Fix the panic while running kms_cube v4: Add alignment check and reuse the comments for ge12_ccs_formats(Matt) v5: Fix typos and wrap comments(Matt) Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Ville Syrjala <ville.syrjala@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Rafael Antognolli <rafael.antognolli@intel.com> Cc: Nanley G Chery <nanley.g.chery@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> --- drivers/gpu/drm/i915/display/intel_display.c | 52 +++++++++++++++++++ .../drm/i915/display/intel_display_types.h | 3 ++ drivers/gpu/drm/i915/display/intel_sprite.c | 11 +++- drivers/gpu/drm/i915/i915_reg.h | 12 +++++ 4 files changed, 77 insertions(+), 1 deletion(-)