diff mbox series

[v3,2/3] drm/i915/dp: Make port sync mode assignments only if all tiles present

Message ID 20191219233305.28080-2-manasi.d.navare@intel.com (mailing list archive)
State New, archived
Headers show
Series [v3,1/3] drm/i915/dp: Make sure all tiled connectors get added to the state with full modeset | expand

Commit Message

Navare, Manasi Dec. 19, 2019, 11:33 p.m. UTC
Add an extra check before making master slave assignments for tiled
displays to make sure we make these assignments only if all tiled
connectors are present. If not then initialize the state to defaults
so it does a normal non tiled modeset without transcoder port sync.

v3:
* Default master trans to INVALID to avoid pipe mismatch
v2:
* Rename icl_add_sync_mode_crtcs
* Move this function just before .compute_config hook
* Check if DP before master slave assignments (Ville)

Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/5
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
---
 drivers/gpu/drm/i915/display/intel_display.c | 165 ++++++++++++-------
 1 file changed, 102 insertions(+), 63 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index cb4036c623c2..68a63cf5f15c 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -12014,88 +12014,106 @@  static bool c8_planes_changed(const struct intel_crtc_state *new_crtc_state)
 	return !old_crtc_state->c8_planes != !new_crtc_state->c8_planes;
 }
 
-static int icl_add_sync_mode_crtcs(struct intel_crtc_state *crtc_state)
+static void reset_port_sync_mode_state(struct intel_crtc_state *crtc_state)
+{
+	crtc_state->master_transcoder = INVALID_TRANSCODER;
+	crtc_state->sync_mode_slaves_mask = 0;
+}
+
+static int icl_compute_port_sync_crtc_state(struct drm_connector *connector,
+					    struct intel_crtc_state *crtc_state,
+					    int num_tiled_conns)
 {
 	struct drm_crtc *crtc = crtc_state->uapi.crtc;
 	struct intel_atomic_state *state = to_intel_atomic_state(crtc_state->uapi.state);
 	struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
-	struct drm_connector *master_connector, *connector;
-	struct drm_connector_state *connector_state;
+	struct drm_connector *master_connector;
 	struct drm_connector_list_iter conn_iter;
 	struct drm_crtc *master_crtc = NULL;
 	struct drm_crtc_state *master_crtc_state;
 	struct intel_crtc_state *master_pipe_config;
-	int i, tile_group_id;
 
 	if (INTEL_GEN(dev_priv) < 11)
 		return 0;
 
+	if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP))
+		return 0;
+
 	/*
 	 * In case of tiled displays there could be one or more slaves but there is
 	 * only one master. Lets make the CRTC used by the connector corresponding
 	 * to the last horizonal and last vertical tile a master/genlock CRTC.
 	 * All the other CRTCs corresponding to other tiles of the same Tile group
 	 * are the slave CRTCs and hold a pointer to their genlock CRTC.
+	 * If all tiles not present do not make master slave assignments.
+	 *
+	 * FIXME: Add support for multiple tile grp ids in the future when such
+	 * panels are available.
 	 */
-	for_each_new_connector_in_state(&state->base, connector, connector_state, i) {
-		if (connector_state->crtc != crtc)
-			continue;
-		if (!connector->has_tile)
+	if (!connector->has_tile ||
+	    crtc_state->hw.mode.hdisplay != connector->tile_h_size ||
+	    crtc_state->hw.mode.vdisplay != connector->tile_v_size ||
+	    num_tiled_conns < connector->num_h_tile * connector->num_v_tile) {
+		reset_port_sync_mode_state(crtc_state);
+		return 0;
+	}
+	/* Last Horizontal and last vertical tile connector is a master
+	 * Master Trans for a Master CRTC is always INVALID.
+	 */
+	if (connector->tile_h_loc == connector->num_h_tile - 1 &&
+	    connector->tile_v_loc == connector->num_v_tile - 1) {
+		crtc_state->master_transcoder = INVALID_TRANSCODER;
+		return 0;
+	}
+
+	/* Loop through all connectors and configure the Slave crtc_state
+	 * to point to the correct master.
+	 */
+	reset_port_sync_mode_state(crtc_state);
+	drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter);
+	drm_for_each_connector_iter(master_connector, &conn_iter) {
+		struct drm_connector_state *master_conn_state = NULL;
+
+		if (!(master_connector->has_tile &&
+		      master_connector->tile_group->id == connector->tile_group->id))
 			continue;
-		if (crtc_state->hw.mode.hdisplay != connector->tile_h_size ||
-		    crtc_state->hw.mode.vdisplay != connector->tile_v_size)
-			return 0;
-		if (connector->tile_h_loc == connector->num_h_tile - 1 &&
-		    connector->tile_v_loc == connector->num_v_tile - 1)
+		if (master_connector->tile_h_loc != master_connector->num_h_tile - 1 ||
+		    master_connector->tile_v_loc != master_connector->num_v_tile - 1)
 			continue;
-		crtc_state->sync_mode_slaves_mask = 0;
-		tile_group_id = connector->tile_group->id;
-		drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter);
-		drm_for_each_connector_iter(master_connector, &conn_iter) {
-			struct drm_connector_state *master_conn_state = NULL;
 
-			if (!master_connector->has_tile)
-				continue;
-			if (master_connector->tile_h_loc != master_connector->num_h_tile - 1 ||
-			    master_connector->tile_v_loc != master_connector->num_v_tile - 1)
-				continue;
-			if (master_connector->tile_group->id != tile_group_id)
-				continue;
-
-			master_conn_state = drm_atomic_get_connector_state(&state->base,
-									   master_connector);
-			if (IS_ERR(master_conn_state)) {
-				drm_connector_list_iter_end(&conn_iter);
-				return PTR_ERR(master_conn_state);
-			}
-			if (master_conn_state->crtc) {
-				master_crtc = master_conn_state->crtc;
-				break;
-			}
+		master_conn_state = drm_atomic_get_connector_state(&state->base,
+								   master_connector);
+		if (IS_ERR(master_conn_state)) {
+			drm_connector_list_iter_end(&conn_iter);
+			return PTR_ERR(master_conn_state);
 		}
-		drm_connector_list_iter_end(&conn_iter);
-
-		if (!master_crtc) {
-			DRM_DEBUG_KMS("Could not find Master CRTC for Slave CRTC %d\n",
-				      connector_state->crtc->base.id);
-			return -EINVAL;
+		if (master_conn_state->crtc) {
+			master_crtc = master_conn_state->crtc;
+			break;
 		}
+	}
+	drm_connector_list_iter_end(&conn_iter);
 
-		master_crtc_state = drm_atomic_get_crtc_state(&state->base,
-							      master_crtc);
-		if (IS_ERR(master_crtc_state))
-			return PTR_ERR(master_crtc_state);
-
-		master_pipe_config = to_intel_crtc_state(master_crtc_state);
-		crtc_state->master_transcoder = master_pipe_config->cpu_transcoder;
-		master_pipe_config->sync_mode_slaves_mask |=
-			BIT(crtc_state->cpu_transcoder);
-		DRM_DEBUG_KMS("Master Transcoder = %s added for Slave CRTC = %d, slave transcoder bitmask = %d\n",
-			      transcoder_name(crtc_state->master_transcoder),
-			      crtc_state->uapi.crtc->base.id,
-			      master_pipe_config->sync_mode_slaves_mask);
+	if (!master_crtc) {
+		DRM_DEBUG_KMS("Could not find Master CRTC for Slave CRTC %d\n",
+			      crtc->base.id);
+		return -EINVAL;
 	}
 
+	master_crtc_state = drm_atomic_get_crtc_state(&state->base,
+						      master_crtc);
+	if (IS_ERR(master_crtc_state))
+		return PTR_ERR(master_crtc_state);
+
+	master_pipe_config = to_intel_crtc_state(master_crtc_state);
+	crtc_state->master_transcoder = master_pipe_config->cpu_transcoder;
+	master_pipe_config->sync_mode_slaves_mask |=
+		BIT(crtc_state->cpu_transcoder);
+	DRM_DEBUG_KMS("Master Transcoder = %s added for Slave CRTC = %d, slave transcoder bitmask = %d\n",
+		      transcoder_name(crtc_state->master_transcoder),
+		      crtc->base.id,
+		      master_pipe_config->sync_mode_slaves_mask);
+
 	return 0;
 }
 
@@ -12660,7 +12678,7 @@  intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
 	struct drm_connector *connector;
 	struct drm_connector_state *connector_state;
 	int base_bpp, ret;
-	int i;
+	int i, tile_group_id = -1, num_tiled_conns = 0;
 	bool retry = true;
 
 	pipe_config->cpu_transcoder =
@@ -12726,17 +12744,30 @@  intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
 	pipe_config->port_clock = 0;
 	pipe_config->pixel_multiplier = 1;
 
+	/* Reset the master transcoder for port sync mode */
+	pipe_config->master_transcoder = INVALID_TRANSCODER;
+
 	/* Fill in default crtc timings, allow encoders to overwrite them. */
 	drm_mode_set_crtcinfo(&pipe_config->hw.adjusted_mode,
 			      CRTC_STEREO_DOUBLE);
 
-	/* Set the crtc_state defaults for trans_port_sync */
-	pipe_config->master_transcoder = INVALID_TRANSCODER;
-	ret = icl_add_sync_mode_crtcs(pipe_config);
-	if (ret) {
-		DRM_DEBUG_KMS("Cannot assign Sync Mode CRTCs: %d\n",
-			      ret);
-		return ret;
+
+	/* Get tile_group_id of tiled connector */
+	for_each_new_connector_in_state(state, connector, connector_state, i) {
+		if (connector_state->crtc == crtc &&
+		    connector->has_tile) {
+			tile_group_id = connector->tile_group->id;
+			break;
+		}
+	}
+
+	/* Get total number of tiled connectors in state that belong to
+	 * this tile group.
+	 */
+	for_each_new_connector_in_state(state, connector, connector_state, i) {
+		if (connector->has_tile &&
+		    connector->tile_group->id == tile_group_id)
+			num_tiled_conns++;
 	}
 
 	/* Pass our mode to the connectors and the CRTC to give them a chance to
@@ -12747,6 +12778,14 @@  intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
 		if (connector_state->crtc != crtc)
 			continue;
 
+		ret = icl_compute_port_sync_crtc_state(connector, pipe_config,
+						       num_tiled_conns);
+		if (ret) {
+			DRM_DEBUG_KMS("Cannot assign Sync Mode CRTCs: %d\n",
+				      ret);
+			return ret;
+		}
+
 		encoder = to_intel_encoder(connector_state->best_encoder);
 		ret = encoder->compute_config(encoder, pipe_config,
 					      connector_state);